![]() |
![]() |
#376 |
Registered User
Join Date: Sep 2018
Location: Ontario
Posts: 821
|
Re: Wife's 48
frame looks really good. Nice work....keep it going
|
![]() |
![]() |
![]() |
#377 |
Senior Member
![]() Join Date: May 2007
Location: Doodah Kansas
Posts: 7,773
|
Re: Wife's 48
I could see you needing a pusher for stop and go traffic, normally the condenser is up against the rad core and the rad fan pulls air through both.
my advice? see what it does. a properly sized condenser could work fine.
__________________
the mass of men live lives of quiet desperation if there is a problem, I can have it. new project WAYNE http://67-72chevytrucks.com/vboard/s...d.php?t=844393 |
![]() |
![]() |
![]() |
#378 |
Senior Member
![]() Join Date: Sep 2017
Location: Bryan, Texas
Posts: 2,311
|
Re: Wife's 48
Thanks Tempest.
Joe, good advice. I'll look at it again, but taking a wait and see approach makes sense.
__________________
8man-aka Robert 1948 on a S10 Frame, small block with a carb 1954 Cab, 53 Front and Bed, 50 Doors, S10 Frame, Power TBD Build thread: "]http://67-72chevytrucks.com/vboard/showthread.php?t=746899&highlight=wife%27s+48[/URL] [/URL]http://67-72chevytrucks.com/vboard/showthread.php?t=840204 |
![]() |
![]() |
![]() |
#379 |
Registered User
Join Date: Sep 2018
Location: Ontario
Posts: 821
|
Re: Wife's 48
after working on my firewall this weekend, I appreciate how good yours looks , nice job.
also, I am using the same motor mounts as you and was thinking of adding gussets underneath the overhanging part..........what do you think? necessary? |
![]() |
![]() |
![]() |
#380 |
Senior Member
![]() Join Date: Sep 2017
Location: Bryan, Texas
Posts: 2,311
|
Re: Wife's 48
Tempest, I've had the motor and trans mounted to the frame, and it seemed secure. The mounts are pretty substantial and the 3 bolts each seem to hold it well.
If I had thought, before powder coating the frame, I probably would have, only for peace of mind. So if you haven't painted your frame, I can't think of a reason to not weld in a gusset. If I have to do it now, I'll be really mad at myself.
__________________
8man-aka Robert 1948 on a S10 Frame, small block with a carb 1954 Cab, 53 Front and Bed, 50 Doors, S10 Frame, Power TBD Build thread: "]http://67-72chevytrucks.com/vboard/showthread.php?t=746899&highlight=wife%27s+48[/URL] [/URL]http://67-72chevytrucks.com/vboard/showthread.php?t=840204 |
![]() |
![]() |
![]() |
#381 |
Registered User
Join Date: Sep 2018
Location: Ontario
Posts: 821
|
Re: Wife's 48
I understand, once it is powder coated you don't want to start welding.
I removed my motor last week and have been looking at the 'overhang' and it is bothering me, and becoming one of those things that I am telling myself to do before the motor goes back in. I will post some pics of when I do it. Your truck looks really good, keep it up |
![]() |
![]() |
![]() |
#382 |
Senior Member
![]() Join Date: Sep 2017
Location: Bryan, Texas
Posts: 2,311
|
Re: Wife's 48
Thanks for the compliment.
Also, I do want to see how you address the overhang. I am going to do it on the 54 when I get to it, now that I'm thinking about it.
__________________
8man-aka Robert 1948 on a S10 Frame, small block with a carb 1954 Cab, 53 Front and Bed, 50 Doors, S10 Frame, Power TBD Build thread: "]http://67-72chevytrucks.com/vboard/showthread.php?t=746899&highlight=wife%27s+48[/URL] [/URL]http://67-72chevytrucks.com/vboard/showthread.php?t=840204 |
![]() |
![]() |
![]() |
#383 |
Senior Member
![]() Join Date: Sep 2017
Location: Bryan, Texas
Posts: 2,311
|
Re: Wife's 48
Well, here is a picture of what is going in the '48;
![]() 350 block, Vortec heads, Quick fuel 750 carb, MSD 65,000 volt street performance ignition, 10:1 compression, 1.94 intake & 1.5 exhaust valves, Comp 274 extreme energy cam, block was decked and squared, has hypereutectic flat top pistons and a 1 piece rear main seal, and the wife loves the dress up stuff. I'll get it and the 700R4 on the bare frame next week.
__________________
8man-aka Robert 1948 on a S10 Frame, small block with a carb 1954 Cab, 53 Front and Bed, 50 Doors, S10 Frame, Power TBD Build thread: "]http://67-72chevytrucks.com/vboard/showthread.php?t=746899&highlight=wife%27s+48[/URL] [/URL]http://67-72chevytrucks.com/vboard/showthread.php?t=840204 |
![]() |
![]() |
![]() |
#384 |
Registered User
Join Date: Sep 2018
Location: Ontario
Posts: 821
|
Re: Wife's 48
Wow, that looks sweet.
|
![]() |
![]() |
![]() |
#385 |
Senior Member
![]() Join Date: Sep 2017
Location: Bryan, Texas
Posts: 2,311
|
Re: Wife's 48
Thanks. Very happy with the way it looks, now if it will just run like I want.
__________________
8man-aka Robert 1948 on a S10 Frame, small block with a carb 1954 Cab, 53 Front and Bed, 50 Doors, S10 Frame, Power TBD Build thread: "]http://67-72chevytrucks.com/vboard/showthread.php?t=746899&highlight=wife%27s+48[/URL] [/URL]http://67-72chevytrucks.com/vboard/showthread.php?t=840204 |
![]() |
![]() |
![]() |
#386 |
Registered User
Join Date: Aug 2012
Location: Northeast KS
Posts: 1,777
|
Re: Wife's 48
I like the valve covers. That cam should have a nice idle note. How much stall are you going with?
Vortec heads are still the best "budget" head IMO, for a stock cube SBC.
__________________
1999 GMC Suburban K2500 SLT, 454/4L80E 1991 Z/28, 6.0L/T56 1949 GMC 250, S10 Frame, 6.0L/4L80E Instagram @aceshighspeedshop |
![]() |
![]() |
![]() |
#387 |
Senior Member
![]() Join Date: May 2007
Location: Doodah Kansas
Posts: 7,773
|
Re: Wife's 48
Gorgeous!
__________________
the mass of men live lives of quiet desperation if there is a problem, I can have it. new project WAYNE http://67-72chevytrucks.com/vboard/s...d.php?t=844393 |
![]() |
![]() |
![]() |
#388 |
Senior Member
![]() Join Date: Sep 2017
Location: Bryan, Texas
Posts: 2,311
|
Re: Wife's 48
Thanks guys.
The valve covers were converted to be held down with a flat head screw so they kind of hide in the cover. Outlaw, going with 2200 stall. I looked at everything I could find on the Vortec heads, and the only negative I found was that some are cracked. So just make sure the ones you get are good. I also read the 906 or the 062 castings are the best, good combustion chamber, good size valves, and there are plenty out there. I won't know if I like it until the truck runs, but right now I'm feeling pretty good about it.
__________________
8man-aka Robert 1948 on a S10 Frame, small block with a carb 1954 Cab, 53 Front and Bed, 50 Doors, S10 Frame, Power TBD Build thread: "]http://67-72chevytrucks.com/vboard/showthread.php?t=746899&highlight=wife%27s+48[/URL] [/URL]http://67-72chevytrucks.com/vboard/showthread.php?t=840204 |
![]() |
![]() |
![]() |
#389 |
Registered User
Join Date: Aug 2012
Location: Northeast KS
Posts: 1,777
|
Re: Wife's 48
Vortec heads are an easy 40hp gain over the smog heads.
2200 stall and some gear will make it a blast to drive! It's always fun when you can hit the start of the torque curve before you're moving.
__________________
1999 GMC Suburban K2500 SLT, 454/4L80E 1991 Z/28, 6.0L/T56 1949 GMC 250, S10 Frame, 6.0L/4L80E Instagram @aceshighspeedshop |
![]() |
![]() |
![]() |
#390 |
Senior Member
![]() Join Date: Sep 2017
Location: Bryan, Texas
Posts: 2,311
|
Re: Wife's 48
Have a posi with 373 gears. I'm hoping it'll be real fun!
__________________
8man-aka Robert 1948 on a S10 Frame, small block with a carb 1954 Cab, 53 Front and Bed, 50 Doors, S10 Frame, Power TBD Build thread: "]http://67-72chevytrucks.com/vboard/showthread.php?t=746899&highlight=wife%27s+48[/URL] [/URL]http://67-72chevytrucks.com/vboard/showthread.php?t=840204 |
![]() |
![]() |
![]() |
#391 |
Registered User
Join Date: Nov 2014
Location: Yuba City, CA.
Posts: 678
|
Re: Wife's 48
That’s a nice looking motor Robert and your dead on with that converter. When I ordered my converter I told them what I had for motor and trans(350ZZ4, th350 with gear vendor OD and 373 posit rear end) they suggested the 2200 stall.
__________________
Jan's 53 |
![]() |
![]() |
![]() |
#392 |
Senior Member
![]() Join Date: Sep 2017
Location: Bryan, Texas
Posts: 2,311
|
Re: Wife's 48
Thanks Jan, I am still figuring this stuff out and it feels good when I find out I did something right.
__________________
8man-aka Robert 1948 on a S10 Frame, small block with a carb 1954 Cab, 53 Front and Bed, 50 Doors, S10 Frame, Power TBD Build thread: "]http://67-72chevytrucks.com/vboard/showthread.php?t=746899&highlight=wife%27s+48[/URL] [/URL]http://67-72chevytrucks.com/vboard/showthread.php?t=840204 |
![]() |
![]() |
![]() |
#393 |
Registered User
Join Date: Sep 2018
Location: Ontario
Posts: 821
|
Re: Wife's 48
here's what I did to support the motor mount.
|
![]() |
![]() |
![]() |
#394 |
Senior Member
![]() Join Date: Sep 2017
Location: Bryan, Texas
Posts: 2,311
|
Re: Wife's 48
Thanks!
__________________
8man-aka Robert 1948 on a S10 Frame, small block with a carb 1954 Cab, 53 Front and Bed, 50 Doors, S10 Frame, Power TBD Build thread: "]http://67-72chevytrucks.com/vboard/showthread.php?t=746899&highlight=wife%27s+48[/URL] [/URL]http://67-72chevytrucks.com/vboard/showthread.php?t=840204 |
![]() |
![]() |
![]() |
#395 |
Senior Member
![]() Join Date: Sep 2017
Location: Bryan, Texas
Posts: 2,311
|
Re: Wife's 48
Got the tranny back today. Had the front runner kit on the motor, so time for some fitment.
I measured the distance between the radiator and the fan on the 350 and wouldn't you know it, Joe was right. The 283 and whatever water pump it had on it fit, but the 350 with the reverse water pump put the water pump into the radiator. So I had to remove and reverse the motor mounts! They are now installed as Joe said they should be installed. That is a pain with the front end assembled. But I got it done. ![]() Of course, the bottom outlet on the radiator hits the belt tensioner, so I have to get that cut off and turned down. Also, with the engine a further back, I have to re-work the tranny support as it is at 2.9 degrees down angle and does not sit flat on the frame anymore. Other than that the block huggers fit, which was a plus given the other stuff. Now to get the cab back on it and see what I'm going to have to do to the firewall!
__________________
8man-aka Robert 1948 on a S10 Frame, small block with a carb 1954 Cab, 53 Front and Bed, 50 Doors, S10 Frame, Power TBD Build thread: "]http://67-72chevytrucks.com/vboard/showthread.php?t=746899&highlight=wife%27s+48[/URL] [/URL]http://67-72chevytrucks.com/vboard/showthread.php?t=840204 |
![]() |
![]() |
![]() |
#396 |
Post Whore
![]() ![]() Join Date: May 2015
Location: Alabama
Posts: 14,630
|
Re: Wife's 48
Ready to see more..!!
__________________
Mongo...aka Greg RIP Dad RIP Jesse 1981 C30 LQ9 NV4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598 Mongos AD- LS3 TR6060...http://67-72chevytrucks.com/vboard/s...34#post8522334 Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563 2023 Chevy Z71..daily driver |
![]() |
![]() |
![]() |
#397 |
Senior Member
![]() Join Date: Mar 2011
Location: West Plains, Missouri
Posts: 7,557
|
Re: Wife's 48
__________________
my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br /> |
![]() |
![]() |
![]() |
#399 |
Senior Member
![]() Join Date: May 2007
Location: Doodah Kansas
Posts: 7,773
|
Re: Wife's 48
looks good in there!
the early frames use nuts and bolts and I tell everyone to keep their sanity and just cut the heads off the stock bolts and fish the rest out. the later frames (I think starting in 95?) had weld-nuts on the backside, so much easier!
__________________
the mass of men live lives of quiet desperation if there is a problem, I can have it. new project WAYNE http://67-72chevytrucks.com/vboard/s...d.php?t=844393 |
![]() |
![]() |
![]() |
#400 |
Registered User
Join Date: Sep 2018
Location: Ontario
Posts: 821
|
Re: Wife's 48
looks real good, and yes, more pics please
|
![]() |
![]() |
![]() |
Bookmarks |
|
|