1972 Chevy 4wd Longhorn Project: Never Ending Changes - Page 16 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jbclassix · 08-11-2011, 04:53 PM

I gotta say, I am picking up A LOT of body work tips from following your build! These are some things I need to watch when its time for re-assembly!

72BlckButy · 08-11-2011, 07:46 PM

Awesome progress!

**Dieselwrencher** · 08-11-2011, 10:13 PM

Quote:

Originally Posted by jbclassix

I gotta say, I am picking up A LOT of body work tips from following your build! These are some things I need to watch when its time for re-assembly!

Thanks, I try.

If you see something and you want to know more, just ask and I'll try to help you out.

Quote:

Originally Posted by 72BlckButy

Awesome progress!

Thanks Nate!

**Dieselwrencher** · 08-12-2011, 03:50 AM

I tried adjusting the door in, and I moved the fender forward so I could pull the bottom out some. I think it looks a little better now.

**Dieselwrencher** · 08-12-2011, 04:00 AM

Tonight I finally got the courage to install my head liner and new trim. I was nervous because I didn't want to break the trim, and I didn't want my head liner falling down. I used some heavy duty spray adhesive, sprayed the inner roof panel and the back side of the head liner, then let it set for about 10 minutes. I honestly think letting it sit was the key. I pushed the head liner to the cab and it stuck pretty much right now. The last time I tried it, the headliner barely stuck to the cab. But last time I only sprayed the head liner and allowed no curing time. I also installed my sun visors. Progress is progress right?

I also dug out my best cowl panel and set it on to see how things were lining up. So far so good, I think.

jbclassix · 08-12-2011, 04:49 PM

Are you gonna start a build thread on your 76 CC? I looked for one but couldn't find it.

**Dieselwrencher** · 08-12-2011, 04:56 PM

I might re-start one. I'll find the original one. I'm hoping to start the rework in about 2 months. If the lift and wheels and tires sell, it might be sooner. We'll see.

**Dieselwrencher** · 08-12-2011, 05:01 PM

Quote:

Originally Posted by jbclassix

Are you gonna start a build thread on your 76 CC? I looked for one but couldn't find it.

Here you go.
http://www.67-72chevytrucks.com/vboa...d.php?t=414168

jbclassix · 08-13-2011, 04:58 PM

Nice! Can't wait to see that thing get family sized

**Dieselwrencher** · 08-16-2011, 03:17 PM

Some more progress. I put the radiator support back on and bolted the fender back on so it would be solid while pulling the dents out. I'm using my Matco stud gun and body hammers to pull these dents. I try to use a hammer and dollie when I can get one in there. Here's some progress pics.

Here's one in the upper roof area.

spudz · 08-17-2011, 04:57 PM

I just found this build.. man you got some skillss. I love this truckk Reminds me of a ford highboy on steroids.

**Dieselwrencher** · 08-18-2011, 04:42 PM

Quote:

Originally Posted by spudz

I just found this build.. man you got some skillss. I love this truckk Reminds me of a ford highboy on steroids.

Thanks.

**Dieselwrencher** · 08-18-2011, 04:47 PM

I went to my local 67-72 parts guy to purchase a new RH fender to save me some body work time. However, when we pulled the only one he had in stock out of the box, it was not right. On the lower portion of the fender where the body line comes off the wheel arch and goes to the door , the line was crooked and the body line was off and it had some dings in it. He had some repairable OE fenders so I got the best one he had that I could see for sure was an OE fender. I have to fix some rust from the normal battery acid drip on the lower cup, but it's better than the RH fender I currently have. Dang, no cutting time on this one!

**Dieselwrencher** · 08-25-2011, 04:16 PM

No real progress, but I did score some 99 up 8 lug chevy wheels off of the local CL. I'm going to take them and get them polished next week, then put them on. I also forgot, a few weeks back I met Eric, Toomuchstuff, in Mn and picked up some sweet Longhorn upper mouldings. Thanks again Eric!

thirdstreettito · 08-25-2011, 10:03 PM

Progress is good!

**Dieselwrencher** · 08-29-2011, 02:38 AM

This weekend I was busy working on customer trucks so I had a couple guys start removing the bed sides from my donor bed. They almost got it torn apart and only a few bolts are left. Yee haw!

propanemudtruck · 08-31-2011, 04:52 AM

**Dieselwrencher** · 08-31-2011, 04:45 PM

Yesterday I did go pick up a new fender and more goodies for the truck. Parts keep piling up, but there just isn't any time for it. I highly doubt it'll be making the All Truck Nats next weekend.

1972hays · 09-23-2011, 01:53 AM

wow thats a lot looks good get-er-done

**Dieselwrencher** · 09-23-2011, 04:44 PM

No real progress on the truck. Just more dust build up on it. I have 2 more customer trucks to get out of the way and then I need to get on this thing. Poor truck is a big azz parts bin now!

Vintage Windmills · 09-26-2011, 01:45 PM

Looks nice. Did you find a couple donor steel floors to make a long floor yet?

**Dieselwrencher** · 09-26-2011, 04:12 PM

Jud, I got a floor and I'm going to cut it in between the two front cross members. I purchased a bed floor patch and I'm going to use it to add in the missing 6". We'll see how it works.

**Dieselwrencher** · 09-27-2011, 03:45 PM

No progress yet, but I did purchase an older Meyers 7' snow blade for it. It didn't come with the pump or mounting brackets. That's okay because I want to build a mount with removable pump and head lights. I hate how the old plow mounts have the front bumper pushed out and the pump and stuff hangs on all year. No thanks.

We got a few customer trucks done so I hope to get on this thing soon. I'd like to get it running or painted, or something.

Vintage Windmills · 09-27-2011, 08:43 PM

Ryan, Do they use road salt in your area? Seems like too nice of a truck to salt up and dissolve by driving in the winter. Looking forward to seeing the custom floor.

mosesburb · 09-27-2011, 09:23 PM

Nice plow. So the snow is what, two maybe three weeks away, are you going to have this ready for it??

08-11-2011, 04:53 PM	#376
jbclassix Junk Yartist Join Date: Jul 2009 Location: Greeley, CO Posts: 2,203	Re: Finally starting my Longhorn 4x4 conversion I gotta say, I am picking up A LOT of body work tips from following your build! These are some things I need to watch when its time for re-assembly! __________________ -Jeremy YOU ONLY FAIL IF YOU STOP TRYING 70 Crew Cab Build Link 70 GMC Suburban 4X4 build thread 95 Yukon Daily Driver Rebuilding an NP205

08-11-2011, 07:46 PM	#377
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Finally starting my Longhorn 4x4 conversion Awesome progress! __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

08-12-2011, 03:50 AM	#379
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,139	Re: Finally starting my Longhorn 4x4 conversion I tried adjusting the door in, and I moved the fender forward so I could pull the bottom out some. I think it looks a little better now. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

08-12-2011, 04:00 AM	#380
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,139	Re: Finally starting my Longhorn 4x4 conversion Tonight I finally got the courage to install my head liner and new trim. I was nervous because I didn't want to break the trim, and I didn't want my head liner falling down. I used some heavy duty spray adhesive, sprayed the inner roof panel and the back side of the head liner, then let it set for about 10 minutes. I honestly think letting it sit was the key. I pushed the head liner to the cab and it stuck pretty much right now. The last time I tried it, the headliner barely stuck to the cab. But last time I only sprayed the head liner and allowed no curing time. I also installed my sun visors. Progress is progress right? I also dug out my best cowl panel and set it on to see how things were lining up. So far so good, I think. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

08-12-2011, 04:49 PM	#381
jbclassix Junk Yartist Join Date: Jul 2009 Location: Greeley, CO Posts: 2,203	Re: Finally starting my Longhorn 4x4 conversion Are you gonna start a build thread on your 76 CC? I looked for one but couldn't find it. __________________ -Jeremy YOU ONLY FAIL IF YOU STOP TRYING 70 Crew Cab Build Link 70 GMC Suburban 4X4 build thread 95 Yukon Daily Driver Rebuilding an NP205

08-12-2011, 04:56 PM	#382
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,139	Re: Finally starting my Longhorn 4x4 conversion I might re-start one. I'll find the original one. I'm hoping to start the rework in about 2 months. If the lift and wheels and tires sell, it might be sooner. We'll see. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

08-13-2011, 04:58 PM	#384
jbclassix Junk Yartist Join Date: Jul 2009 Location: Greeley, CO Posts: 2,203	Re: Finally starting my Longhorn 4x4 conversion Nice! Can't wait to see that thing get family sized __________________ -Jeremy YOU ONLY FAIL IF YOU STOP TRYING 70 Crew Cab Build Link 70 GMC Suburban 4X4 build thread 95 Yukon Daily Driver Rebuilding an NP205

08-16-2011, 03:17 PM	#385
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,139	Re: Finally starting my Longhorn 4x4 conversion Some more progress. I put the radiator support back on and bolted the fender back on so it would be solid while pulling the dents out. I'm using my Matco stud gun and body hammers to pull these dents. I try to use a hammer and dollie when I can get one in there. Here's some progress pics. Here's one in the upper roof area. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

08-17-2011, 04:57 PM	#386
spudz Registered User Join Date: Oct 2005 Location: Branchville SC Posts: 1,647	Re: Finally starting my Longhorn 4x4 conversion I just found this build.. man you got some skillss. I love this truckk Reminds me of a ford highboy on steroids. __________________ 2004 z71, 96 z71 on 38s, 88 Chevy k5 blazer, 4in lift. 84 swb project, 82 SWB project , 84 chevy 4x4 lwb project, 88 Jimmy beater/highschool ride. 79 c30. 99 tahoe 4x4 project. and a bunch of parts trucks..

08-18-2011, 04:47 PM	#388
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,139	Re: Finally starting my Longhorn 4x4 conversion I went to my local 67-72 parts guy to purchase a new RH fender to save me some body work time. However, when we pulled the only one he had in stock out of the box, it was not right. On the lower portion of the fender where the body line comes off the wheel arch and goes to the door , the line was crooked and the body line was off and it had some dings in it. He had some repairable OE fenders so I got the best one he had that I could see for sure was an OE fender. I have to fix some rust from the normal battery acid drip on the lower cup, but it's better than the RH fender I currently have. Dang, no cutting time on this one! __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

08-25-2011, 04:16 PM	#389
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,139	Re: Finally starting my Longhorn 4x4 conversion No real progress, but I did score some 99 up 8 lug chevy wheels off of the local CL. I'm going to take them and get them polished next week, then put them on. I also forgot, a few weeks back I met Eric, Toomuchstuff, in Mn and picked up some sweet Longhorn upper mouldings. Thanks again Eric! __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

08-25-2011, 10:03 PM	#390
thirdstreettito Resident of Here Join Date: May 2008 Location: Wesley Chapel, FL, USA Posts: 7,716	Re: Finally starting my Longhorn 4x4 conversion Progress is good! __________________ ~Bradley~ 2004 Black GTO LS2/T56 too much to list Miss having a truck

08-29-2011, 02:38 AM	#391
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,139	Re: Finally starting my Longhorn 4x4 conversion This weekend I was busy working on customer trucks so I had a couple guys start removing the bed sides from my donor bed. They almost got it torn apart and only a few bolts are left. Yee haw! __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

08-31-2011, 04:52 AM	#392
propanemudtruck Local Redneck Authority Join Date: Mar 2009 Location: Grand Rapids, MI Posts: 584	Re: Finally starting my Longhorn 4x4 conversion __________________ -Kevin four on the floor feel the beat in your soul movin to the rhythym pumpin til ya cant take no more dance if you want to do what you came to you cant ignore the feeling of that four on the floor

08-31-2011, 04:45 PM	#393
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,139	Re: Finally starting my Longhorn 4x4 conversion Yesterday I did go pick up a new fender and more goodies for the truck. Parts keep piling up, but there just isn't any time for it. I highly doubt it'll be making the All Truck Nats next weekend. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*



Register or Log In To remove these advertisements.

09-23-2011, 01:53 AM	#394
1972hays Registered User Join Date: Feb 2011 Location: A****er ca Posts: 475	Re: Finally starting my Longhorn 4x4 conversion wow thats a lot looks good get-er-done __________________ 72 chevrolet 4wd 350/350 swb fleet green mean army machine

09-23-2011, 04:44 PM	#395
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,139	Re: Finally starting my Longhorn 4x4 conversion No real progress on the truck. Just more dust build up on it. I have 2 more customer trucks to get out of the way and then I need to get on this thing. Poor truck is a big azz parts bin now! __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

09-26-2011, 01:45 PM	#396
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: Finally starting my Longhorn 4x4 conversion Looks nice. Did you find a couple donor steel floors to make a long floor yet? __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

09-26-2011, 04:12 PM	#397
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,139	Re: Finally starting my Longhorn 4x4 conversion Jud, I got a floor and I'm going to cut it in between the two front cross members. I purchased a bed floor patch and I'm going to use it to add in the missing 6". We'll see how it works. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

09-27-2011, 03:45 PM	#398
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,139	Re: Finally starting my Longhorn 4x4 conversion No progress yet, but I did purchase an older Meyers 7' snow blade for it. It didn't come with the pump or mounting brackets. That's okay because I want to build a mount with removable pump and head lights. I hate how the old plow mounts have the front bumper pushed out and the pump and stuff hangs on all year. No thanks. We got a few customer trucks done so I hope to get on this thing soon. I'd like to get it running or painted, or something. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

09-27-2011, 08:43 PM	#399
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: Finally starting my Longhorn 4x4 conversion Ryan, Do they use road salt in your area? Seems like too nice of a truck to salt up and dissolve by driving in the winter. Looking forward to seeing the custom floor. __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

09-27-2011, 09:23 PM	#400
mosesburb I had a V-8 Join Date: May 2003 Location: Phoenix AZ Posts: 1,116	Re: Finally starting my Longhorn 4x4 conversion Nice plow. So the snow is what, two maybe three weeks away, are you going to have this ready for it?? __________________ 1972 K20 Suburban, 5.9L Cummins, Banks Power Pack, NV4500HD, NP205, H.A.D., D60/14FF ARB Link To Build: HERE.

Register or Log In To remove these advertisements.