'66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... - Page 16 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Jvsapp · 12-16-2009, 12:14 AM

thanks FF. DAMN that looks AMAZING!!. your work never ceases to amaze me FF. can't wait till you get everything all blown apart, sprayed up and finished. can i ask you a question. do you get rust flashover in oregon? how long can you leave it as bare metal before it starts to surface rust? i'm thinking years, unlike here.

Sven · 12-16-2009, 12:20 AM

Oh yeh! What is the PCD on that S2000?

Jvsapp · 12-16-2009, 01:33 AM

damn Sven looks good. i like the white one in your inspirations pics. always wanted one too. i'll have to keep an eye on your build too now.

Sven · 12-16-2009, 12:13 PM

Quote:

Originally Posted by Jvsapp

damn Sven looks good. i like the white one in your inspirations pics. always wanted one too. i'll have to keep an eye on your build too now.

The guy that built the white one is something of hero with that build ... the F20C transplants into Celicas is becoming quite popular due to him.

Mike, sorry for a mini hijack ... looking forward to some updates on this naughty little minx!

-Steve

Frizzle Fry · 12-16-2009, 02:16 PM

No worries Steve. Sweet project, and nice truck too! I'm going to have to peruse that site some more.

S2000 PCD is 5x114.3mm or 5x4.5"

Sven · 12-16-2009, 03:06 PM

That is a great site. English based, so a lot of the cars are English, but there are also a lot of Japanese cars too. I'm English so the draw is obvious. Thanks for the kudos on my old broad, she's now as reliable as a hammer.

Some of the things those Brits do in single sized mini garages and with a hammer and a cheap harbor freight welder is truly amazing.

-Steve

Frizzle Fry · 12-16-2009, 07:47 PM

Quote:

Originally Posted by Jvsapp

do you get rust flashover in oregon? how long can you leave it as bare metal before it starts to surface rust? i'm thinking years, unlike here.

It doesn't seem to be a problem here. We just don't have enough heat/humidity I suppose. I have bare metal on the 61 that has been exposed for years without showing any sign of flash/rust. I'm sure it's no longer perfectly clean though.

Frizzle Fry · 12-17-2009, 08:25 PM

more here

and here

also played with the dash/gauges a little...

Blasted:

VA72C10 · 12-17-2009, 11:06 PM

Nice man. Wish I lived on the left coast so I could see this thing in person...

mosesburb · 12-18-2009, 05:59 AM

I was looking through the 400 pages of pics you have (yeah, I had a little time to kill), but I saw the pics of when you moved the shifter on the output housing of the trans. I see where you cut it off, but I did not find any pics of how you re-attached the "shifter receptacle" to the trans.

So, how'd you do it??

Frizzle Fry · 12-18-2009, 12:38 PM

Quote:

Originally Posted by VA72C10

Nice man. Wish I lived on the left coast so I could see this thing in person...

Let me know if you are ever in the area

Quote:

Originally Posted by mosesburb

I was looking through the 400 pages of pics you have (yeah, I had a little time to kill), but I saw the pics of when you moved the shifter on the output housing of the trans. I see where you cut it off, but I did not find any pics of how you re-attached the "shifter receptacle" to the trans.

So, how'd you do it??

I'm waiting till after the engine mounts are built to position the shifter.

**Hart_Rod** · 12-20-2009, 11:32 AM

Great progress Mike!!! I'm still partial to "Tubby" though,

. You need to update your photobucket, I can't see any of the pictures on the last few pages....

.

Frizzle Fry · 12-20-2009, 01:23 PM

Thanks Rob

Tubby has a pile of PB parts on the way and will get some love in the new year.

The photobucket account has exceeded bandwidth limits for the month. Will be back to normal in Jan...

Frizzle Fry · 12-21-2009, 05:48 AM

Last update till 2010!

I have the PS frame rail fully integrated. Still a little clean up to do on the top and all of the underside.

Here's the photobucket link until I'm out of the bandwidth doghouse

Sven · 12-22-2009, 09:47 PM

Really nice work, mate!

Jvsapp · 12-23-2009, 07:26 AM

again FF, your work never ceases to amaze me. the circle area is that going to be cut out?

Frizzle Fry · 12-24-2009, 01:43 AM

Thanks guys. Feels great to have one side complete. The other side should be smooth sailing when I get back to it in Jan 2010. The marked area on the framerail is where the header is close and may need to be relieved slightly.

Sub-versive · 12-24-2009, 02:08 AM

Wow! Just amazing!

Jvsapp · 12-24-2009, 02:09 AM

FF wanted to ask what media you are using for blasting? looks like aluminum oxide? also what pressure you use?

Frizzle Fry · 12-25-2009, 08:30 AM

thanks sub

jvsapp, 60/80 garnet @90psi

Jvsapp · 12-25-2009, 10:28 PM

thanks FF. Merry Xmas.

BTW stumbled across this on another forum i subscribe to. this is for both you and steve but he don't got nothing on you FF.
http://forums.club4ag.com/zerothread?id=36114

dammitmitchell · 12-26-2009, 01:44 AM

ff's better

Frizzle Fry · 12-26-2009, 05:24 AM

I've seen that build and talked to the builder. Nice guy, and a nice car. I'd say that the one that runs wins

Britain Smith · 12-30-2009, 01:27 AM

I think he won. Heck, he even has ITB's!

-Britain

Sub-versive · 12-31-2009, 12:38 AM

Can't wait to see more!

12-16-2009, 12:14 AM	#376
Jvsapp Registered User Join Date: Dec 2008 Location: on a rock in the pacific Posts: 554	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... thanks FF. DAMN that looks AMAZING!!. your work never ceases to amaze me FF. can't wait till you get everything all blown apart, sprayed up and finished. can i ask you a question. do you get rust flashover in oregon? how long can you leave it as bare metal before it starts to surface rust? i'm thinking years, unlike here. __________________ 63 4 door Chevy II - NOVACATION (Updated 08/23/09) 65 Morris minor Traveler 77 Chevy Longbed. 93 Corolla JDM 20V Swap Daily Driver (Updated 07/16/09) Powder coating Hawaii Domestic Violence Awareness Show 5/3/09 Hawaii Rod and Custom Show 4/18

12-16-2009, 12:20 AM	#377
Sven Registered User Join Date: Dec 2009 Location: Laveen, AZ Posts: 69	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... Oh yeh! What is the PCD on that S2000? __________________ 1969 Chevrolet 4x4 C10 Pickup

12-16-2009, 01:33 AM	#378
Jvsapp Registered User Join Date: Dec 2008 Location: on a rock in the pacific Posts: 554	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... damn Sven looks good. i like the white one in your inspirations pics. always wanted one too. i'll have to keep an eye on your build too now. __________________ 63 4 door Chevy II - NOVACATION (Updated 08/23/09) 65 Morris minor Traveler 77 Chevy Longbed. 93 Corolla JDM 20V Swap Daily Driver (Updated 07/16/09) Powder coating Hawaii Domestic Violence Awareness Show 5/3/09 Hawaii Rod and Custom Show 4/18

12-16-2009, 02:16 PM	#380
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... No worries Steve. Sweet project, and nice truck too! I'm going to have to peruse that site some more. S2000 PCD is 5x114.3mm or 5x4.5" Last edited by Frizzle Fry; 12-16-2009 at 02:17 PM.

12-16-2009, 03:06 PM	#381
Sven Registered User Join Date: Dec 2009 Location: Laveen, AZ Posts: 69	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... That is a great site. English based, so a lot of the cars are English, but there are also a lot of Japanese cars too. I'm English so the draw is obvious. Thanks for the kudos on my old broad, she's now as reliable as a hammer. Some of the things those Brits do in single sized mini garages and with a hammer and a cheap harbor freight welder is truly amazing. -Steve __________________ 1969 Chevrolet 4x4 C10 Pickup

12-17-2009, 08:25 PM	#383
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... more here and here also played with the dash/gauges a little... Blasted: Last edited by Frizzle Fry; 12-21-2009 at 05:58 AM.

12-17-2009, 11:06 PM	#384
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... Nice man. Wish I lived on the left coast so I could see this thing in person... __________________ Looking for a 67-72 swb or blazer project in or around VA.

12-18-2009, 05:59 AM	#385
mosesburb I had a V-8 Join Date: May 2003 Location: Phoenix AZ Posts: 1,116	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... I was looking through the 400 pages of pics you have (yeah, I had a little time to kill), but I saw the pics of when you moved the shifter on the output housing of the trans. I see where you cut it off, but I did not find any pics of how you re-attached the "shifter receptacle" to the trans. So, how'd you do it?? __________________ 1972 K20 Suburban, 5.9L Cummins, Banks Power Pack, NV4500HD, NP205, H.A.D., D60/14FF ARB Link To Build: HERE.

12-20-2009, 11:32 AM	#387
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,859	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... Great progress Mike!!! I'm still partial to "Tubby" though, . You need to update your photobucket, I can't see any of the pictures on the last few pages..... __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3 Last edited by Hart_Rod; 12-20-2009 at 11:33 AM.

12-20-2009, 01:23 PM	#388
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... Thanks Rob Tubby has a pile of PB parts on the way and will get some love in the new year. The photobucket account has exceeded bandwidth limits for the month. Will be back to normal in Jan...

12-21-2009, 05:48 AM	#389
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... Last update till 2010! I have the PS frame rail fully integrated. Still a little clean up to do on the top and all of the underside. Here's the photobucket link until I'm out of the bandwidth doghouse Last edited by Frizzle Fry; 12-21-2009 at 05:59 AM.

12-22-2009, 09:47 PM	#390
Sven Registered User Join Date: Dec 2009 Location: Laveen, AZ Posts: 69	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... Really nice work, mate! __________________ 1969 Chevrolet 4x4 C10 Pickup

12-23-2009, 07:26 AM	#391
Jvsapp Registered User Join Date: Dec 2008 Location: on a rock in the pacific Posts: 554	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... again FF, your work never ceases to amaze me. the circle area is that going to be cut out? __________________ 63 4 door Chevy II - NOVACATION (Updated 08/23/09) 65 Morris minor Traveler 77 Chevy Longbed. 93 Corolla JDM 20V Swap Daily Driver (Updated 07/16/09) Powder coating Hawaii Domestic Violence Awareness Show 5/3/09 Hawaii Rod and Custom Show 4/18

12-24-2009, 01:43 AM	#392
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... Thanks guys. Feels great to have one side complete. The other side should be smooth sailing when I get back to it in Jan 2010. The marked area on the framerail is where the header is close and may need to be relieved slightly.

12-24-2009, 02:08 AM	#393
Sub-versive Boss Hogg Join Date: Apr 2002 Location: The Beaver State Posts: 2,361	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... Wow! Just amazing!



Register or Log In To remove these advertisements.

12-24-2009, 02:09 AM	#394
Jvsapp Registered User Join Date: Dec 2008 Location: on a rock in the pacific Posts: 554	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... FF wanted to ask what media you are using for blasting? looks like aluminum oxide? also what pressure you use? __________________ 63 4 door Chevy II - NOVACATION (Updated 08/23/09) 65 Morris minor Traveler 77 Chevy Longbed. 93 Corolla JDM 20V Swap Daily Driver (Updated 07/16/09) Powder coating Hawaii Domestic Violence Awareness Show 5/3/09 Hawaii Rod and Custom Show 4/18 Last edited by Jvsapp; 12-24-2009 at 02:09 AM.

12-25-2009, 08:30 AM	#395
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... thanks sub jvsapp, 60/80 garnet @90psi

12-25-2009, 10:28 PM	#396
Jvsapp Registered User Join Date: Dec 2008 Location: on a rock in the pacific Posts: 554	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... thanks FF. Merry Xmas. BTW stumbled across this on another forum i subscribe to. this is for both you and steve but he don't got nothing on you FF. http://forums.club4ag.com/zerothread?id=36114 __________________ 63 4 door Chevy II - NOVACATION (Updated 08/23/09) 65 Morris minor Traveler 77 Chevy Longbed. 93 Corolla JDM 20V Swap Daily Driver (Updated 07/16/09) Powder coating Hawaii Domestic Violence Awareness Show 5/3/09 Hawaii Rod and Custom Show 4/18 Last edited by Jvsapp; 12-26-2009 at 12:44 AM.

12-26-2009, 01:44 AM	#397
dammitmitchell the pollock Join Date: May 2008 Location: abilene, texas Posts: 4,423	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... ff's better __________________ Jack of ALL trades, Master of none.. (but one... procrastination) Army vet 02-08 RIP El Jay! Miss you brother! http://67-72chevytrucks.com/vboard/s...d.php?t=343538 http://67-72chevytrucks.com/vboard/s...d.php?t=386042

12-26-2009, 05:24 AM	#398
Frizzle Fry Registered User Join Date: Aug 2005 Location: Hillsboro Oregon Posts: 6,449	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... I've seen that build and talked to the builder. Nice guy, and a nice car. I'd say that the one that runs wins

12-30-2009, 01:27 AM	#399
Britain Smith Registered User Join Date: May 2007 Location: Hillsboro, OR Posts: 35	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... I think he won. Heck, he even has ITB's! -Britain

12-31-2009, 12:38 AM	#400
Sub-versive Boss Hogg Join Date: Apr 2002 Location: The Beaver State Posts: 2,361	Re: '66 Sunbeam Minx Project - F20C/6sp/4-link/Discs... Can't wait to see more!

Register or Log In To remove these advertisements.