The 60-66 "PAYING IT FORWARD" thread! - Page 16 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Patrat** · 04-12-2018, 01:18 PM

I am in the process of modernizing a 61 pickup. Will be replacing all drive train, suspension, brakes, steering. It is a 6 cyl, three speed, no frills truck. It has low mileage (about 62k)

Has an under dash A/C that works.

At this point, I have not done much disassembly so no pictures but if you want to see it run/drive it is still intact for now. I would much prefer someone take entire power train and not sell off individual pieces.

I am in San Antonio TX, I will not ship.

LostMy65 · 04-12-2018, 01:53 PM

Quote:

Originally Posted by Patrat

I am in the process of modernizing a 61 pickup. Will be replacing all drive train, suspension, brakes, steering. It is a 6 cyl, three speed, no frills truck. It has low mileage (about 62k)

Has an under dash A/C that works.

At this point, I have not done much disassembly so no pictures but if you want to see it run/drive it is still intact for now. I would much prefer someone take entire power train and not sell off individual pieces.

I am in San Antonio TX, I will not ship.

Are you trying to find a home for the underdash AC?
If so, I'm interested.

**Patrat** · 04-12-2018, 04:16 PM

Yes, whole ystem

LostMy65 · 04-12-2018, 04:27 PM

Quote:

Originally Posted by Patrat

Yes, whole ystem

If you decide to ship, I would be interested in the AC system.

**aerotruk63** · 04-12-2018, 07:44 PM

Pictures of the cool pack components would be interesting to see. Condensor and dryer the same as the 62-63 version? Been looking for years. Drove by San Antonio last month. 64 they changed to an aluminum condensor. Yours must be steel?

**aerotruk63** · 04-12-2018, 08:26 PM

Patrat Does the steering wheel have a chrome 1/2 ring or just the small chrome button?

rudyyloverboiii · 04-12-2018, 10:30 PM

If anyone is looking for a c20 frame I have one to get rid of. Its a 64 no paperwork no tires. Long bed 3/4 ton no motor trans or motor mounts and drive shaft. Its in my garage need it gone.
Im rarely on here but ill leave my # in case anyone is interested.
95!552o962

hope it can go to someone and use it.

**Patrat** · 04-13-2018, 09:14 AM

Aerotruck, the a/c is aftermarket, the steering wheel is not available

**aerotruk63** · 04-13-2018, 11:13 AM

Quote:

Originally Posted by Patrat

Aerotruck, the a/c is aftermarket, the steering wheel is not available

Ok thanks, what brand aftermarket? Frigiking?

**Patrat** · 04-15-2018, 09:57 AM

All parts found a new local home, thanks to all who responded.

T2vigil · 04-19-2018, 05:32 PM

More brake parts. I'm converting my 64 from drum to disc all the way around. So if anyone wants any parts and or all parts let me know. Everything looks like it has some wear but nothing that would cause me to toss the parts.
Terry

AJCK87 · 06-25-2018, 09:09 PM

Used, 60-63 windshield - out of a 1963 GMC
Hey Guys,

Just putting it out there, if you really need a piece of glass. I just had a new windshield installed in my 63 panel and I have the original glass that came with it. Has a few scratches on the wings and one from the wiper arm as well as a small bubble in the centre of the glass. Moving so only available for the next few days.
The glass is free, but you pay for shipping. I have kept the shipping crate, which is made of wood and cardboard as well as all the packing material. The new glass got to me fine from California. Would like to see some one get some use out of it, if you want it let me know. It may be easier to email me as I see that more often.

anthonykennedy1987@hotmail.com

AJCK87 · 07-11-2018, 12:58 AM

Quote:

Originally Posted by AJCK87

Used, 60-63 windshield - out of a 1963 GMC
Hey Guys,

Just putting it out there, if you really need a piece of glass. I just had a new windshield installed in my 63 panel and I have the original glass that came with it. Has a few scratches on the wings and one from the wiper arm as well as a small bubble in the centre of the glass. Moving so only available for the next few days.
The glass is free, but you pay for shipping. I have kept the shipping crate, which is made of wood and cardboard as well as all the packing material. The new glass got to me fine from California. Would like to see some one get some use out of it, if you want it let me know. It may be easier to email me as I see that more often.

anthonykennedy1987@hotmail.com

Windshield is gone

kdad · 08-22-2018, 11:29 PM

Quote:

Originally Posted by T2vigil

More brake parts. I'm converting my 64 from drum to disc all the way around. So if anyone wants any parts and or all parts let me know. Everything looks like it has some wear but nothing that would cause me to toss the parts.
Terry

I could sure use a hub if still available

**pimpston65** · 09-07-2018, 08:09 PM

free 64-66 correct chrome bumper. there is one part that was pulled out of place by a tow chain. pickup only.

T2vigil · 09-07-2018, 09:55 PM

Last call for Brake Parts. 64 to 66 Chevy. Front hubs and all brake related parts for the front. Rear includes everything that was attached to the rear end. Everything goes to the scrap yard next Friday. May not be cost effective to ship but if you or someone you know need parts and are near Dayton, TN I can meet part way. Terry In case you wanted to know why its because I install power assisted discs on all four corners.

**Android04** · 04-25-2018, 08:16 AM

This thread is NOT to request parts unless someone is offering them free.

Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here

If you need any further assistance with that please contact any Admin for help.

BFD305 · 04-29-2018, 09:07 PM

Just got the in cab tank out.

I have the mounting straps, most of the padding between strap and tank and the tank without filler part.

Also have a drum brake master cylinder

ACK · 05-19-2018, 10:14 PM

Quote:

Originally Posted by BFD305

Just got the in cab tank out.

I have the mounting straps, most of the padding between strap and tank and the tank without filler part.

Also have a drum brake master cylinder

If the brake cylinder happens to be a dual reservoir, I would be interested. Thanks for sharing the parts.

Macdaddy1 · 04-29-2018, 09:26 PM

I would be interested in the tank. How much shipped to 32439.

Pat

LostMy65 · 05-03-2018, 09:32 AM

Sm420.

**jayoldschool** · 05-20-2018, 12:26 PM

ACK, just buy one local. A brand new one for about the same as shipping. BTDT.

LostMy65 · 05-20-2018, 02:11 PM

Quote:

Originally Posted by jayoldschool

ACK, just buy one local. A brand new one for about the same as shipping. BTDT.

I agree.

ACK · 05-20-2018, 09:31 PM

Quote:

Originally Posted by jayoldschool

ACK, just buy one local. A brand new one for about the same as shipping. BTDT.

BFD305, I'll pass on the brake cylinder and thanks to jayoldschool and LostMy65 for the advice.

Praxiss454 · 05-21-2018, 01:32 AM

Chevy 10.5" hubcaps from a 70s/80s Impala or Caprice - yours for shipping. Tired of stepping over them in the garage and I'm not gonna put them back on my

04-12-2018, 01:18 PM	#1
Patrat Junior Member Join Date: Apr 2015 Location: San Antonio Posts: 46	Re: The 60-66 "PAYING IT FORWARD" thread! I am in the process of modernizing a 61 pickup. Will be replacing all drive train, suspension, brakes, steering. It is a 6 cyl, three speed, no frills truck. It has low mileage (about 62k) Has an under dash A/C that works. At this point, I have not done much disassembly so no pictures but if you want to see it run/drive it is still intact for now. I would much prefer someone take entire power train and not sell off individual pieces. I am in San Antonio TX, I will not ship.

04-12-2018, 04:16 PM	#3
Patrat Junior Member Join Date: Apr 2015 Location: San Antonio Posts: 46	Re: The 60-66 "PAYING IT FORWARD" thread! Yes, whole ystem

04-12-2018, 07:44 PM	#5
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,627	Re: The 60-66 "PAYING IT FORWARD" thread! Pictures of the cool pack components would be interesting to see. Condensor and dryer the same as the 62-63 version? Been looking for years. Drove by San Antonio last month. 64 they changed to an aluminum condensor. Yours must be steel? __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1

04-12-2018, 08:26 PM	#6
aerotruk63 Check The Champ, Demonstrator Join Date: Jun 2009 Location: Montreal,Quebec Posts: 6,627	Re: The 60-66 "PAYING IT FORWARD" thread! Patrat Does the steering wheel have a chrome 1/2 ring or just the small chrome button? __________________ 1963 *Chevrolet Truck* Literature LINK: https://picasaweb.google.com/113840717762774560215 YouTube Channel with 20+ Original *Chevrolet Truck* Salesmen, Mechanics & Service Department Training Slideshows. https://www.youtube.com/results?sear...otruk63&page=1

04-12-2018, 10:30 PM	#7
rudyyloverboiii Registered User Join Date: Nov 2014 Location: IE California Posts: 225	Re: The 60-66 "PAYING IT FORWARD" thread! If anyone is looking for a c20 frame I have one to get rid of. Its a 64 no paperwork no tires. Long bed 3/4 ton no motor trans or motor mounts and drive shaft. Its in my garage need it gone. Im rarely on here but ill leave my # in case anyone is interested. 95!552o962 hope it can go to someone and use it.

04-13-2018, 09:14 AM	#8
Patrat Junior Member Join Date: Apr 2015 Location: San Antonio Posts: 46	Re: The 60-66 "PAYING IT FORWARD" thread! Aerotruck, the a/c is aftermarket, the steering wheel is not available

04-15-2018, 09:57 AM	#10
Patrat Junior Member Join Date: Apr 2015 Location: San Antonio Posts: 46	Re: The 60-66 "PAYING IT FORWARD" thread! All parts found a new local home, thanks to all who responded.

04-19-2018, 05:32 PM	#11
T2vigil Registered User Join Date: Jan 2010 Location: Evensville, TN Posts: 236	Re: The 60-66 "PAYING IT FORWARD" thread! More brake parts. I'm converting my 64 from drum to disc all the way around. So if anyone wants any parts and or all parts let me know. Everything looks like it has some wear but nothing that would cause me to toss the parts. Terry

06-25-2018, 09:09 PM	#12
AJCK87 Registered User Join Date: Apr 2015 Location: Port McNeill, B.C. Posts: 464	Re: The 60-66 "PAYING IT FORWARD" thread! Used, 60-63 windshield - out of a 1963 GMC Hey Guys, Just putting it out there, if you really need a piece of glass. I just had a new windshield installed in my 63 panel and I have the original glass that came with it. Has a few scratches on the wings and one from the wiper arm as well as a small bubble in the centre of the glass. Moving so only available for the next few days. The glass is free, but you pay for shipping. I have kept the shipping crate, which is made of wood and cardboard as well as all the packing material. The new glass got to me fine from California. Would like to see some one get some use out of it, if you want it let me know. It may be easier to email me as I see that more often. anthonykennedy1987@hotmail.com Attached Images

09-07-2018, 08:09 PM	#15
pimpston65 Senior Member Join Date: Aug 2013 Location: corktown,mi. Posts: 5,194	Re: The 60-66 "PAYING IT FORWARD" thread! free 64-66 correct chrome bumper. there is one part that was pulled out of place by a tow chain. pickup only. Attached Images

09-07-2018, 09:55 PM	#16
T2vigil Registered User Join Date: Jan 2010 Location: Evensville, TN Posts: 236	Re: The 60-66 "PAYING IT FORWARD" thread! Last call for Brake Parts. 64 to 66 Chevy. Front hubs and all brake related parts for the front. Rear includes everything that was attached to the rear end. Everything goes to the scrap yard next Friday. May not be cost effective to ship but if you or someone you know need parts and are near Dayton, TN I can meet part way. Terry In case you wanted to know why its because I install power assisted discs on all four corners.

04-25-2018, 08:16 AM	#17
Android04 Senior Member Join Date: Aug 2017 Location: Louisville, KY Posts: 377	Re: The 60-66 "PAYING IT FORWARD" thread! This thread is NOT to request parts unless someone is offering them free. Please note that you must be a supporting member to post classified items. This includes but is not limited to What Its Worth, Want To Buy, Want To Trade, and For Sale. Please consider supporting the forum by subscribing. Further information on the subscription levels available are located here If you need any further assistance with that please contact any Admin for help. Last edited by chevy_mike; 04-25-2018 at 11:48 AM.

04-29-2018, 09:07 PM	#18
BFD305 Registered User Join Date: Aug 2017 Location: Greeley, CO Posts: 31	65 fuel tank, mount straps, fuel line Just got the in cab tank out. I have the mounting straps, most of the padding between strap and tank and the tank without filler part. Also have a drum brake master cylinder

04-29-2018, 09:26 PM	#20
Macdaddy1 Registered User Join Date: Dec 2017 Location: Niceville Florida Posts: 347	Re: The 60-66 "PAYING IT FORWARD" thread! I would be interested in the tank. How much shipped to 32439. Pat

05-03-2018, 09:32 AM	#21
LostMy65 But Found Her 25yrs Later! Join Date: Oct 2010 Location: Oregon City, Oregon Posts: 10,528	Re: The 60-66 "PAYING IT FORWARD" thread! Sm420. __________________ I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035



Register or Log In To remove these advertisements.

05-20-2018, 12:26 PM	#22
jayoldschool Moderator Join Date: Dec 2012 Location: ON, Canada Posts: 2,169	Re: The 60-66 "PAYING IT FORWARD" thread! ACK, just buy one local. A brand new one for about the same as shipping. BTDT.

05-21-2018, 01:32 AM	#25
Praxiss454 Registered User Join Date: Jun 2016 Location: Novato, CA Posts: 519	Re: The 60-66 "PAYING IT FORWARD" thread! Chevy 10.5" hubcaps from a 70s/80s Impala or Caprice - yours for shipping. Tired of stepping over them in the garage and I'm not gonna put them back on my __________________ 1965 GMC 1000 SWB Fleetside L6 230 - SOLD Thanks everyone for the help over the years.

Register or Log In To remove these advertisements.