My 93 CCSSB - Page 16 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

joe231 · 04-23-2010, 08:10 AM

Nice work!
You have you cruised it around your folks neighborhood to see how she runs now?

JohnC · 04-23-2010, 09:51 AM

If for some reason you don't get the truck and trailer going I have one we can bring it on.

Hopefully you won't need it.

scotts62 · 04-23-2010, 06:07 PM

Cool man thanks for the offer, we are going to work on it tomorrow so it should be ready to rock and roll, now just some 62 time in there somewhere..

JohnC · 04-24-2010, 09:01 AM

Yeah Travis and I were talking yesterday that we needed to have a work day out at your place.

scotts62 · 04-24-2010, 09:49 AM

Quote:

Originally Posted by JohnC

Yeah Travis and I were talking yesterday that we needed to have a work day out at your place.

*highperf4x4* · 04-24-2010, 01:35 PM

Quote:

Originally Posted by JohnC

Yeah Travis and I were talking yesterday that we needed to have a work day out at your place.

Yeah but we probably should have done it today.

We're running out of weekends before the truck meet and I have alot to do yet on mine.

*highperf4x4* · 04-24-2010, 10:07 PM

So the crew is basically ready to haul the 62 to the meet?

joe231 · 04-25-2010, 01:00 AM

cool!

*highperf4x4* · 04-25-2010, 01:25 AM

So are you planning on pulling with the 3/4 or still trying to get the crew ready too?

Man you are going to be busy.

scotts62 · 04-25-2010, 10:19 AM

Ill just pull it with the ugly green machine unless i can pull off a miracle

JohnC · 04-25-2010, 11:47 AM

Quote:

Originally Posted by scotts62

Ill just pull it with the ugly green machine unless i can pull off a miracle

You Can Do It!

scotts62 · 04-25-2010, 12:57 PM

scotts62 · 05-14-2010, 11:56 AM

I havent done much at all to the crew, Joe did happen to run to Pull-a-part and picked up a lower control arm for me while he was out there, now i can start the front end swap well after the 62 gets a little farther of coarse

*BGRAFX* · 05-14-2010, 12:48 PM

I went to the picknpull yesterday, $2 to walk around, didn't find what I was looking for and everything was all hacked up. But there is a clean 87chevy that they will be moing out into the yard hopefully this weekend so I will be busy.

always like taking pix at the chevy trucks.

scotts62 · 05-14-2010, 12:55 PM

Heck yeah! Post em up!

*BGRAFX* · 05-14-2010, 01:32 PM

I put them in my build thread, and I will add more as I go, Man your crew is looking good!

scotts62 · 05-14-2010, 01:46 PM

Cool ill check them out, Thanks! Just need to figure out why its not running quite right

JohnC · 05-14-2010, 01:49 PM

Quote:

Originally Posted by scotts62

Cool ill check them out, Thanks! Just need to figure out why its not running quite right

Because you are working on the 62?

scotts62 · 05-14-2010, 01:54 PM

well that too but when i take a break from it ill mess with the crew im jumping back and forth and its making me

scotts62 · 05-23-2010, 10:20 AM

Did a compression test on it yesterday while i was out there, here are the numbers..

Not too happy with #7 cylinder but at least its enough to fire the plug...

joe231 · 05-23-2010, 10:26 AM

isn't that the #7 cylinder?
are big blocks numbered the same as small blocks?

scotts62 · 05-23-2010, 10:28 AM

Quote:

Originally Posted by joe231

isn't that the #7 cylinder?
are big blocks numbered the same as small blocks?

Yeah, sorry had a my bad moment... you must have saw the first post when it was #8

joe231 · 05-23-2010, 10:48 AM

good, I thought I was loosing it

scotts62 · 05-23-2010, 10:51 AM

Thats what you think

Any luck with a schematic or whatever he was looking into?

joe231 · 05-23-2010, 11:06 AM

He is working on it, we need to find a OBD-I scanner or I need to build this

http://www.techedge.com.au/vehicle/aldl8192/8192hw.htm
so we can use my laptop to view the data stream.
he also thinks, by the code from the computer, that someone may have swapped in an older computer.....the plot thickens.....

04-23-2010, 08:10 AM	#1
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: My 93 Crewcab Build Nice work! You have you cruised it around your folks neighborhood to see how she runs now? __________________ *CHEVY ONLY*

04-23-2010, 09:51 AM	#2
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: My 93 Crewcab Build If for some reason you don't get the truck and trailer going I have one we can bring it on. Hopefully you won't need it.

04-23-2010, 06:07 PM	#3
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,240	Re: My 93 Crewcab Build Cool man thanks for the offer, we are going to work on it tomorrow so it should be ready to rock and roll, now just some 62 time in there somewhere.. __________________ Scott 93 crew cab build Project 62

04-24-2010, 09:01 AM	#4
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: My 93 Crewcab Build Yeah Travis and I were talking yesterday that we needed to have a work day out at your place.

04-25-2010, 01:25 AM	#9
highperf4x4 Account Suspended Join Date: Apr 2009 Location: Oklahoma City Posts: 4,709	Re: My 93 Crewcab Build So are you planning on pulling with the 3/4 or still trying to get the crew ready too? Man you are going to be busy.

04-24-2010, 10:07 PM	#7
highperf4x4 Account Suspended Join Date: Apr 2009 Location: Oklahoma City Posts: 4,709	Re: My 93 Crewcab Build So the crew is basically ready to haul the 62 to the meet?

04-25-2010, 01:00 AM	#8
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: My 93 Crewcab Build cool! __________________ *CHEVY ONLY*

04-25-2010, 10:19 AM	#10
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,240	Re: My 93 Crewcab Build Ill just pull it with the ugly green machine unless i can pull off a miracle __________________ Scott 93 crew cab build Project 62

04-25-2010, 12:57 PM	#12
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,240	Re: My 93 Crewcab Build __________________ Scott 93 crew cab build Project 62

05-14-2010, 11:56 AM	#13
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,240	Re: My 93 Crewcab Build I havent done much at all to the crew, Joe did happen to run to Pull-a-part and picked up a lower control arm for me while he was out there, now i can start the front end swap well after the 62 gets a little farther of coarse __________________ Scott 93 crew cab build Project 62

05-14-2010, 12:48 PM	#14
BGRAFX Account Suspended Join Date: Jun 2009 Location: kansas city Ks Posts: 1,970	Re: My 93 Crewcab Build I went to the picknpull yesterday, $2 to walk around, didn't find what I was looking for and everything was all hacked up. But there is a clean 87chevy that they will be moing out into the yard hopefully this weekend so I will be busy. always like taking pix at the chevy trucks.

05-14-2010, 12:55 PM	#15
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,240	Re: My 93 Crewcab Build Heck yeah! Post em up! __________________ Scott 93 crew cab build Project 62

05-14-2010, 01:32 PM	#16
BGRAFX Account Suspended Join Date: Jun 2009 Location: kansas city Ks Posts: 1,970	Re: My 93 Crewcab Build I put them in my build thread, and I will add more as I go, Man your crew is looking good!

05-14-2010, 01:46 PM	#17
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,240	Re: My 93 Crewcab Build Cool ill check them out, Thanks! Just need to figure out why its not running quite right __________________ Scott 93 crew cab build Project 62

05-14-2010, 01:54 PM	#19
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,240	Re: My 93 Crewcab Build well that too but when i take a break from it ill mess with the crew im jumping back and forth and its making me __________________ Scott 93 crew cab build Project 62



Register or Log In To remove these advertisements.

05-23-2010, 10:20 AM	#20
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,240	Re: My 93 Crewcab Build Did a compression test on it yesterday while i was out there, here are the numbers.. Not too happy with #7 cylinder but at least its enough to fire the plug... __________________ Scott 93 crew cab build Project 62 Last edited by scotts62; 05-23-2010 at 10:22 AM.

05-23-2010, 10:26 AM	#21
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: My 93 Crewcab Build isn't that the #7 cylinder? are big blocks numbered the same as small blocks? __________________ *CHEVY ONLY*

05-23-2010, 10:48 AM	#23
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: My 93 Crewcab Build good, I thought I was loosing it __________________ *CHEVY ONLY*

05-23-2010, 10:51 AM	#24
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,240	Re: My 93 Crewcab Build Thats what you think Any luck with a schematic or whatever he was looking into? __________________ Scott 93 crew cab build Project 62

05-23-2010, 11:06 AM	#25
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: My 93 Crewcab Build He is working on it, we need to find a OBD-I scanner or I need to build this http://www.techedge.com.au/vehicle/aldl8192/8192hw.htm so we can use my laptop to view the data stream. he also thinks, by the code from the computer, that someone may have swapped in an older computer.....the plot thickens..... __________________ *CHEVY ONLY*

Register or Log In To remove these advertisements.