'62 GMC BurbMaster "Rust"oration, Patina Build..... - Page 16 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**ChiefRocka** · 01-14-2015, 01:01 PM

I used the existing top bolt hole loactions, and drilled the two outers for the wedge cuts ...

Weld nuts on underside.

Final grind/sand will come later before Powder ...
-
-
-
-

-
-
-
-

**Advanced Design** · 01-14-2015, 10:21 PM

That came out nice! Good progress Chief.

**ChiefRocka** · 01-15-2015, 12:11 PM

Quote:

Originally Posted by Advanced Design

That came out nice! Good progress Chief.

Thanks man !!

Next up was the additional tranny cooler off of the Roadmaster ... might as well use it. Bypassing the radiator all together, and running a large cooler in front is the preferred way, but my tranny temps in the burban should be marginal.

I will be towing with it, but nothing more than 5000 lbs or so.
-
-
-
First step was mounting of the cooler. I didn't get pics of that, but basically I just reshaped the aluminum brackets to fit the core. Looks like it was made for it ...
-
-
-

-
-
-
Rather than run rubber hose (that would be toooo easy), hardline is the answer !

To me, its more like art ...

-
-
-

**ChiefRocka** · 01-15-2015, 12:33 PM

-
-
Second line in. This one received just a bubble flare on the lower end, as it will slip into the existing 3/8" rubber line ...
-
-
-

-
-

aggie91 · 01-15-2015, 12:58 PM

Nice!

Free Candy Inside · 01-15-2015, 12:59 PM

Those lines look great.

**Advanced Design** · 01-15-2015, 05:36 PM

Oh yeah...nice line bending! Really like a neatly routed and bent line...skill and patience.

**ChiefRocka** · 01-18-2015, 01:30 PM

Quote:

Originally Posted by aggie91

Nice!

Quote:

Originally Posted by Free Candy Inside

Those lines look great.

Quote:

Originally Posted by Advanced Design

Oh yeah...nice line bending! Really like a neatly routed and bent line...skill and patience.

Thanks guys ... It does take time and patience.

I try not to waste any tube in my bends.

**ChiefRocka** · 01-18-2015, 01:44 PM

The Engine Oil cooler was next. The stock lines did reach, but were slacked tight ... so I wanted it a little more cleaner. New hardlines, some push-loc fittings, and we were good ...
-
-
-

-
-
-

**ChiefRocka** · 01-18-2015, 08:27 PM

-
-
-

likaroc13 · 01-18-2015, 09:07 PM

You have some nice attention to detail!

**Advanced Design** · 01-18-2015, 10:17 PM

Thanks for sharing those connectors Chief. I hadn't seen them before.
Great detail!

**Captainfab** · 01-19-2015, 01:52 AM

Very nice work Chief.....especially on the tube bending. What brand of tube bender are you using? Do you like it? I need to get a better one.

**ChiefRocka** · 01-20-2015, 11:13 PM

Quote:

Originally Posted by Captainfab

Very nice work Chief.....especially on the tube bending. What brand of tube bender are you using? Do you like it? I need to get a better one.

I have two ...

I use a larger Matco one, and just picked up a smaller, Blue Point one for a little tighter bends on smaller tube.

I will post pics and prt numbers

**ChiefRocka** · 01-20-2015, 11:14 PM

Quote:

Originally Posted by likaroc13

You have some nice attention to detail!

Quote:

Originally Posted by Advanced Design

Thanks for sharing those connectors Chief. I hadn't seen them before.
Great detail!

Thanks

**ChiefRocka** · 01-20-2015, 11:38 PM

I wanted to switch it up a bit, and move to the back of the Burban, and start the mock up of the rear floor crossmembers and fuel tank.

Since I have extra crossmembers, I decided to add an extra one to the rear floor area behind the axle, to support the wood floor, the fuel tank and eventually the rear most seat ....
-
-
Temporary shims for spacing the body mounts ....
-
-

-
-
-

**ChiefRocka** · 01-20-2015, 11:47 PM

The "extra" crossmember was added by using these nut inserts (left over from some Aluminum truck box installs ... I save everything

) This allowed me to place the crossmember in a different spot other than the factory holes.
-
-
-

-
-
-

-
-
-
Next was to check the fuel tank fit. Again, this plastic tank is from the Roadmaster, and has the built in fuel pump ...
-
-
-

-
-
-

**ChiefRocka** · 01-20-2015, 11:53 PM

The tank needs to sit as high as possible ... so a little trimming of the front crossmeber will give me 2"... which is better than nothing
-
-
-

-
-
-

**ChiefRocka** · 01-21-2015, 12:00 AM

Trimming the crossmember to clearance for fuel lines, and raised section of tank ....
-
-
-

-
-
-

-
-
-
Random pics ....
-
-
-

-
-
-

piratexpress1369a · 01-21-2015, 09:33 AM

great work ..stay at it

**ChiefRocka** · 01-21-2015, 11:04 AM

Thanks ....

That's the plan !

**Advanced Design** · 01-21-2015, 01:25 PM

I like the inclinometer pics...making it easy for us to understand.
Is the roadmaster tank fill on the left side?
As always great work Chief.

**Captainfab** · 04-29-2015, 01:38 AM

Any more progress Chief?

I'm sure you have a lot going on but thought I'd ask anyway.

**ChiefRocka** · 10-14-2015, 09:19 AM

Quote:

Originally Posted by Captainfab

Any more progress Chief?

I'm sure you have a lot going on but thought I'd ask anyway.

Hey Captain ... I sure do.

Yes, the past year has been quite a wild ride.

I am now sweeping up the dust that settled a couple of months ago, and filling the whole I was in !!

To bring this back up to date, I found some old pics on my PC from when I left off ... I must of been bored here:
-

-
-

**ChiefRocka** · 10-14-2015, 09:25 AM

-
-

01-14-2015, 01:01 PM	#376
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,150	Re: '62 GMC BurbMaster "Rust"oration, Patina Build..... I used the existing top bolt hole loactions, and drilled the two outers for the wedge cuts ... Weld nuts on underside. Final grind/sand will come later before Powder ... - - - - - - - - __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!"

01-14-2015, 10:21 PM	#377
Advanced Design Senior Member Join Date: Jul 2012 Location: Oblong, Illinois Posts: 7,028	Re: '62 GMC BurbMaster "Rust"oration, Patina Build..... That came out nice! Good progress Chief. __________________ Doug Advanced Design’s 1977 Blazer Build Advanced Design's '48 'Burb Build Mrs Advanced Design's '72 Suburban Advanced Design's 56 BelAir LS swap

01-15-2015, 12:33 PM	#379
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,150	Re: '62 GMC BurbMaster "Rust"oration, Patina Build..... - - Second line in. This one received just a bubble flare on the lower end, as it will slip into the existing 3/8" rubber line ... - - - - - - - - - __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!"

01-15-2015, 12:58 PM	#380
aggie91 I'm just glad to be here! Join Date: Jan 2008 Location: Longview, TX Posts: 4,788	Re: '62 GMC BurbMaster "Rust"oration, Patina Build..... Nice! __________________ Karl 1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues) http://67-72chevytrucks.com/vboard/s...d.php?t=372424 The LST Challenge: http://67-72chevytrucks.com/vboard/s...=1#post7812257 Korbin's 1st Square: "Sunburn" http://67-72chevytrucks.com/vboard/s...d.php?t=418618 1985 GMC Sierra: "White Trash", Korbin's 2nd now... http://67-72chevytrucks.com/vboard/s...d.php?t=632305 Henry - 1984 Chevrolet, Owen's 1st Square

01-15-2015, 12:59 PM	#381
Free Candy Inside Registered User Join Date: May 2014 Location: Dayton, OH Posts: 752	Re: '62 GMC BurbMaster "Rust"oration, Patina Build..... Those lines look great.

01-15-2015, 05:36 PM	#382
Advanced Design Senior Member Join Date: Jul 2012 Location: Oblong, Illinois Posts: 7,028	Re: '62 GMC BurbMaster "Rust"oration, Patina Build..... Oh yeah...nice line bending! Really like a neatly routed and bent line...skill and patience. __________________ Doug Advanced Design’s 1977 Blazer Build Advanced Design's '48 'Burb Build Mrs Advanced Design's '72 Suburban Advanced Design's 56 BelAir LS swap

01-18-2015, 01:44 PM	#384
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,150	Re: '62 GMC BurbMaster "Rust"oration, Patina Build..... The Engine Oil cooler was next. The stock lines did reach, but were slacked tight ... so I wanted it a little more cleaner. New hardlines, some push-loc fittings, and we were good ... - - - - - - - - - - - - - - - __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!"

01-18-2015, 08:27 PM	#385
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,150	Re: '62 GMC BurbMaster "Rust"oration, Patina Build..... - - - - - - - - - __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!"

01-18-2015, 09:07 PM	#386
likaroc13 Rollin' Old Skool Join Date: Jun 2007 Location: Hattiesburg, MS Posts: 5,371	Re: '62 GMC BurbMaster "Rust"oration, Patina Build..... You have some nice attention to detail! __________________ _____________________________________________ Phillip My Build threads: 1966 Chevy C-10 "Black Betty" shortbed, fleetside, BBW, 327 V8/ Powerglide (under construction) http://67-72chevytrucks.com/vboard/s...ighlight=betty 1997 Chevy Tahoe, 2dr/2wd, mild custom (Daily driver) http://67-72chevytrucks.com/vboard/s...d.php?t=601142 Pics: '66 C-10 https://flic.kr/s/aHsjHWD4h9 '97 Tahoe https://flic.kr/s/aHsjGZ7wKP '93 C-1500 https://flic.kr/s/aHskxdpdnQ '88 S-10 Blazer https://flic.kr/s/aHsjYGx4Md Previous Rides: 1993 Chevy S-10 ext. cab, 4.3L, 4/5 drop (Sold) 1993 Chevy C-1500 short/step Retro-Rod (Sold) 1988 S-10 Blazer 2dr/2wd mild custom (Sold)

01-18-2015, 10:17 PM	#387
Advanced Design Senior Member Join Date: Jul 2012 Location: Oblong, Illinois Posts: 7,028	Re: '62 GMC BurbMaster "Rust"oration, Patina Build..... Thanks for sharing those connectors Chief. I hadn't seen them before. Great detail! __________________ Doug Advanced Design’s 1977 Blazer Build Advanced Design's '48 'Burb Build Mrs Advanced Design's '72 Suburban Advanced Design's 56 BelAir LS swap

01-19-2015, 01:52 AM	#388
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,251	Re: '62 GMC BurbMaster "Rust"oration, Patina Build..... Very nice work Chief.....especially on the tube bending. What brand of tube bender are you using? Do you like it? I need to get a better one. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

01-20-2015, 11:38 PM	#391
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,150	Re: '62 GMC BurbMaster "Rust"oration, Patina Build..... I wanted to switch it up a bit, and move to the back of the Burban, and start the mock up of the rear floor crossmembers and fuel tank. Since I have extra crossmembers, I decided to add an extra one to the rear floor area behind the axle, to support the wood floor, the fuel tank and eventually the rear most seat .... - - Temporary shims for spacing the body mounts .... - - - - - - - - - - - - - - __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!"

01-20-2015, 11:47 PM	#392
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,150	Re: '62 GMC BurbMaster "Rust"oration, Patina Build..... The "extra" crossmember was added by using these nut inserts (left over from some Aluminum truck box installs ... I save everything ) This allowed me to place the crossmember in a different spot other than the factory holes. - - - - - - - - - - - - - - - Next was to check the fuel tank fit. Again, this plastic tank is from the Roadmaster, and has the built in fuel pump ... - - - - - - __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!"

01-20-2015, 11:53 PM	#393
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,150	Re: '62 GMC BurbMaster "Rust"oration, Patina Build..... The tank needs to sit as high as possible ... so a little trimming of the front crossmeber will give me 2"... which is better than nothing - - - - - - - - - - - - - - - __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!"

01-21-2015, 12:00 AM	#394
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,150	Re: '62 GMC BurbMaster "Rust"oration, Patina Build..... Trimming the crossmember to clearance for fuel lines, and raised section of tank .... - - - - - - - - - - - - Random pics .... - - - - - - __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!"



Register or Log In To remove these advertisements.

01-21-2015, 09:33 AM	#395
piratexpress1369a Registered User Join Date: Jun 2012 Location: Selkirk Ontario Canada Posts: 1,141	Re: '62 GMC BurbMaster "Rust"oration, Patina Build..... great work ..stay at it __________________ My 63 GMC Panel Slow Build http://67-72chevytrucks.com/vboard/s...=1#post5457281 63

01-21-2015, 11:04 AM	#396
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,150	Re: '62 GMC BurbMaster "Rust"oration, Patina Build..... Thanks .... That's the plan ! __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!"

01-21-2015, 01:25 PM	#397
Advanced Design Senior Member Join Date: Jul 2012 Location: Oblong, Illinois Posts: 7,028	Re: '62 GMC BurbMaster "Rust"oration, Patina Build..... I like the inclinometer pics...making it easy for us to understand. Is the roadmaster tank fill on the left side? As always great work Chief. __________________ Doug Advanced Design’s 1977 Blazer Build Advanced Design's '48 'Burb Build Mrs Advanced Design's '72 Suburban Advanced Design's 56 BelAir LS swap

04-29-2015, 01:38 AM	#398
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,251	Re: '62 GMC BurbMaster "Rust"oration, Patina Build..... Any more progress Chief? I'm sure you have a lot going on but thought I'd ask anyway. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

10-14-2015, 09:25 AM	#400
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,150	Re: '62 GMC BurbMaster "Rust"oration, Patina Build..... - - __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!"

Register or Log In To remove these advertisements.