|
01-18-2012, 05:32 AM | #1 | |
Still plays with trucks
Join Date: Jul 2009
Location: Spokane, WA
Posts: 3,556
|
Re: Make it handle
Quote:
One nice thing about these as they sit is that they work with 15" wheels so they are a good upgrade even for those who wish to use stock rally wheels on their trucks, even if only occasionally. I'd like to see an aluminum bearing hub designed for these spindles that will use some off the shelf large Wilwood slip on rotors and good calipers. I'm sure the 88-98 truck guys would appreciate that too.
__________________
miSSed opportunity - ground up creation of an AWD 1994 454 SS that never was http://67-72chevytrucks.com/vboard/s...d.php?t=795577 69 C10 shortbed stepside 400 small block - built like what a super sport truck could have been 69 K20 lwb TBI 350 4L60E NP208 14-bolt Dana-44 w/disc 68 Camaro SS / RS 500hp 439 inch roller cam big block 4L80E 79 Malibu TPI 350 4L60 w/ Z28 steering & sway bars |
|
02-10-2011, 04:04 PM | #2 |
Senior Member
Join Date: Jul 2010
Location: Dandridge, Tn. USA
Posts: 2,226
|
Re: Make it handle
Spring hieght does not come into play, as there is very little caster gain in these trucks, the CL moves almost straight up as the suspension moves. Tre's wont have any binding with this mod. I'll put up picts and specs for this one next week.
__________________
GoodGuys 2012 Pro-Truck Champion 2012 Truckin' Throwdown Champion GoodGuys 2011 National Champion 2011 Truckin' Throwdown Champion GoodGuys 2010 National Champion Proud to put our products up against all others! |
02-10-2011, 04:55 PM | #3 |
Registered User
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 21,947
|
Re: Make it handle
Thanks for all the info sharing BTW.....
__________________
67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... Cubic inches is like Indiana Jones with a cheap pistol. |
02-10-2011, 08:39 PM | #4 |
A guy with a truck
Join Date: Sep 2005
Location: Germany, for now
Posts: 5,920
|
Re: Make it handle
No doubt. Very informative. Always interested to see what's next with JT and this thread.
__________________
-Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy |
02-11-2011, 05:22 PM | #5 |
Senior Member
Join Date: Jul 2010
Location: Dandridge, Tn. USA
Posts: 2,226
|
Re: Make it handle
Yes to the last post.
As some threads are talking about camber, caster and bumpsteer, It seems this is a good time to shed some light here. 1. Anyone who claims "NO BUMPSTEER" is full of steer stuff (b.s.) So. we need a way to compare bumpsteer. Some use degrees of steering, and some use a dimension. You can convert one to the other with some trig., but it's not really needed. Unless you have a laser rack, and lots of other toys, we'll talk in dimesion. What were trying to find out is HOW MUCH does it turn during the travel? and does it turn 'in' or 'out'? Most racers and chassis builders use a 'toe plate' and some dial indicators. The typical toe plate is 20" wide and 6"+ tall. We have a "floating" guage stand which is a bit easier to use. Once set up, you chart total toe movement for every inch of travel. We typically test + or - 3" from RH. The goal is to be less than .1" of bumpsteer per 1" of travel. Of coarse, the lower the better. When you first look at the chart it looks really bad, but look at the scale. Each 1/4" on the bump scale = .020" . To the right on the chart is a 1 to 1 drawing, as you can see, it's very hard to compare changes this way. In 3" up compression travel we have .173" on bump 'in', and in 3" of droop, we have .148" of bump 'in'. An outside average of .058" per 1" of travel. If you converted this to degrees it would be .163 degrees per inch average. Just so you know, the first pict, and graph are tests on our C-10 R/P kit. Bech testing is easier than on the vehicle, but it takes about 1 1/2 hrs to set up, the 20 min to chart. Each time you make a change, you start over. Fun stuff, but it pays off.
__________________
GoodGuys 2012 Pro-Truck Champion 2012 Truckin' Throwdown Champion GoodGuys 2011 National Champion 2011 Truckin' Throwdown Champion GoodGuys 2010 National Champion Proud to put our products up against all others! |
02-11-2011, 05:38 PM | #6 |
needs more $$$
Join Date: Mar 2004
Location: Sacramento
Posts: 1,936
|
Re: Make it handle
So, .058" per inch is well under the goal. Did you guys happen to do the same tests to the stock steering to find the difference? Also, were there any other mods for caster already done during this test or does that not effect on bump steer?
__________________
1970 2wd Blazer |
02-11-2011, 08:16 PM | #7 |
Senior Member
Join Date: Jul 2010
Location: Dandridge, Tn. USA
Posts: 2,226
|
Re: Make it handle
The test I did here is using a stock 72 crossmember, spindles, and Ride-Tech Strong Arms. I tested our rack with this crossmember and stock arms also, and was able to get similar results. The Ride Tech arms change the caster, once aligned (camber and toe to 0), I got 7 1/2 deg of caster. Stock arms gave us 2 deg. As the camber increases, (the spindle is tipping back) the steering arm raises up. This change in the hieght of the TRE will change the bumpsteer curve. I have not yet tested a stock C-10, but we will soon, and I expect it to be a bunch. If we put a jack under our JT and lift it up you can watch the wheel turn out. - not good.
__________________
GoodGuys 2012 Pro-Truck Champion 2012 Truckin' Throwdown Champion GoodGuys 2011 National Champion 2011 Truckin' Throwdown Champion GoodGuys 2010 National Champion Proud to put our products up against all others! |
02-12-2011, 12:01 AM | #8 | |
I'm just glad to be here!
Join Date: Jan 2008
Location: Longview, TX
Posts: 4,788
|
Re: Make it handle
Quote:
I am really learning alot reading this thread and enjoy it! Thanks Rob! Posted via Mobile Device
__________________
Karl 1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues) http://67-72chevytrucks.com/vboard/s...d.php?t=372424 The LST Challenge: http://67-72chevytrucks.com/vboard/s...=1#post7812257 Korbin's 1st Square: "Sunburn" http://67-72chevytrucks.com/vboard/s...d.php?t=418618 1985 GMC Sierra: "White Trash", Korbin's 2nd now... http://67-72chevytrucks.com/vboard/s...d.php?t=632305 Henry - 1984 Chevrolet, Owen's 1st Square |
|
02-12-2011, 03:20 AM | #9 |
Senior Member
Join Date: Jul 2010
Location: Dandridge, Tn. USA
Posts: 2,226
|
Re: Make it handle
Oops, right you are, "caster". - long day.
__________________
GoodGuys 2012 Pro-Truck Champion 2012 Truckin' Throwdown Champion GoodGuys 2011 National Champion 2011 Truckin' Throwdown Champion GoodGuys 2010 National Champion Proud to put our products up against all others! |
02-14-2011, 10:16 PM | #10 |
Senior Member
Join Date: Jul 2010
Location: Dandridge, Tn. USA
Posts: 2,226
|
Re: Make it handle
Yes, for now, just call and ask. Thanks.
__________________
GoodGuys 2012 Pro-Truck Champion 2012 Truckin' Throwdown Champion GoodGuys 2011 National Champion 2011 Truckin' Throwdown Champion GoodGuys 2010 National Champion Proud to put our products up against all others! |
02-14-2011, 10:47 PM | #11 |
Registered User
Join Date: Apr 2007
Location: Elk Grove, CA
Posts: 375
|
Re: Make it handle
Rob, thanks for the bumpsteer lesson! You break it down really well, making it easy to understand. I'd be interested in seeing the comparison to stock suspension. Does the curve usually stay pretty similar for droop vs. compression, or would that depend on ride height, correct? Also, what rack are you using on the setup you have in the pic? Thank you for sharing your knowledge!
__________________
1964 C10 Shortened Shortbed Cammed LQ9 P&P 1967 C10 Trophy Truck BB 438 (soon to be worked on again) |
02-14-2011, 11:28 PM | #12 |
Senior Member
Join Date: Jul 2010
Location: Dandridge, Tn. USA
Posts: 2,226
|
Re: Make it handle
That rack is from a Izusu commercial, but we are looking at others, that one has difficulties with the fitting placement.
For shocks, you can just give us a RH measurement. Glad it made an improvement.
__________________
GoodGuys 2012 Pro-Truck Champion 2012 Truckin' Throwdown Champion GoodGuys 2011 National Champion 2011 Truckin' Throwdown Champion GoodGuys 2010 National Champion Proud to put our products up against all others! |
02-17-2011, 10:44 AM | #13 |
Registered User
Join Date: Dec 2010
Location: Little Rock, AR
Posts: 61
|
Re: Make it handle
I've read and re-read the majority of this thread. I'm planning my truck (its slowly converting itself-I swear- to a toy instead of a DD).
I know, when it comes right down to brass tacks, I'm trying to make a farm tool race/make handle. Rigidity and weight reduction/re-allocation are my primary concerns since I'm trying to shave as much weight (Power to weight ratio is improved something to the effect of +10 to 15 hp if I drop 150-200 on my 5K lb truck) and these (73-87) frames are not the best in the world for rigidity (don't even hold under the pressure of the steering box pushing offroad tires sometimes). My question is, and I know its first-grade stuff, but what would be the suggestions insofar as weight transfer, distribution, as these trucks its about 55/45 (under the most optimistic assumption). I've not started building my suspension, because I know that those upgrades will respond MUCH better to a frame/truck built with some minor changes. Sorry for the long/elementary question... just curious. *also, since I may be stiffening the frame, would it do me any good to drop the cab/front end an inch? I think I've got enough room to drop the cab mounts and the core mounts an inch, I could avoid dissasembling the ENTIRE truck to shave out the crossmember. "moving the weight I have lower in addition to lowering suspension..." Last edited by triophan; 02-17-2011 at 11:44 AM. |
02-18-2011, 04:43 PM | #14 |
Senior Member
Join Date: Jul 2010
Location: Dandridge, Tn. USA
Posts: 2,226
|
Re: Make it handle
Triophan, I'm currently working on the JT chassis. - we bought an 'un-bent' frame for $300. to work on since the JT frame is a bit twisty. I'll put up basic chassis prep picts next week, and i'll also try to get the JT on the scales soon. The total wieght is 3820, small block, 4-speed, ft disc, p/S, P/B.
__________________
GoodGuys 2012 Pro-Truck Champion 2012 Truckin' Throwdown Champion GoodGuys 2011 National Champion 2011 Truckin' Throwdown Champion GoodGuys 2010 National Champion Proud to put our products up against all others! |
02-19-2011, 12:02 PM | #15 |
Registered User
Join Date: Dec 2010
Location: Little Rock, AR
Posts: 61
|
Re: Make it handle
A buddy of mine has a spare '78 frame I may be setting out in the shed to do some work on... Figured I can square and level it with scissor jacks (pick up at junkyard for $5 ea) and let the reinforcing begin!
Only problem I could forsee would be the fact that I would have to run out to my truck every 5 seconds to measure parts clearances, etc. You should have your own Sub-forum, with projects, Q&A, haha... might be too much for one dude though. Keep me posted! Thanks |
02-23-2011, 04:53 PM | #16 |
Senior Member
Join Date: Jul 2010
Location: Dandridge, Tn. USA
Posts: 2,226
|
Re: Make it handle
Well, I started to right a heavy rant, then i stopped, I'll save that one for later. Lets talk sway bars. - anti-roll bars. The idea here is that this bar can add roll stiffness by transfering spring rate from the inside spring to the outside spring in a corner, without making the straight line ride harsh. For years we have said that sway bars are the best 'bang-for-buck' you can spend on suspension. - Still true. A swaybar's stiffness depends on material used, diameter/or/wall thickness for solid or tube bars, width between pivit mounts, length of the arms, and mounting link style and location. - lots of factors. It's easy to see that a thicker bar is stiffer than a thin bar, givin the same shape and material. Tube bars (hollow), are usually a better grade of alloy steel, so a 1 1/4" x .250" bar may be stiffer than a 1 1/4" solid, but not always. Manufacturers of quality bars should be able to provide sway bar "rate" info. One thing to be aware of is the sway bar link. This link connects the bar to the suspension. (this is going to get close to my rant topic) Think about the front bar on a C-10. The factory bar was connected to the arm with a bushing and strap - NO MOVEMENT. The bar pivits on an arc that moves front-to-back as it moves, and the A-Arm moves on an in-to-out arc. So, as the suspension travels, the sway bar is being pulled in and out, and the A-Arm/busing is being twisted to match the bar angle. Doesn't sound to good does it? Now, the stock pivit and arm mount bushings were pretty soft rubber, so it wasn't so bad, and it was cheap for GM. And, it was 1966 when the first oned rolled out. (bias ply tires, 8-tracks,...) Now, a lot of aftermarket suppliers have bigger 'performance' bars, in urathane bushings (stiffer) and the binding is WORSE. Making the suspension less consistant. Yes, the roll stiffness is greater, but the suspension is less consistant/predictable. Some, are going to a link connection to the arm with two rod-ends. That is a step up, but a small one. The 'average' rod end will swing 10 to 12 degrees, thats 5 or 6 either way, so with a short link these may bind up, and this type of bind may be a worse feeling than stock, and actualy reduce suspension movement. To make the link long enough not to bind, the sway bar would need to be above the steering links. No, you cant just rotate a stock style bar ( even one set up for a link) because the angle of the end would be wrong. Why don't 'they' make a bar like this? Well, to me, it looks like even the best performance bars are a copy of the original bar, with a hole in it for a mount link. To get what we all would really want, someone will need to study, TEST, and stop copying the stocker. which takes me even closer to my original rant. You would'nt take financial advice from a homeless person, or welding tips from someone who never welded. Why are we all buying parts from someone who hasn't built/drivin/owned one of the things were building? Crap, some of the rant got out. Sorry.
__________________
GoodGuys 2012 Pro-Truck Champion 2012 Truckin' Throwdown Champion GoodGuys 2011 National Champion 2011 Truckin' Throwdown Champion GoodGuys 2010 National Champion Proud to put our products up against all others! |
02-23-2011, 05:03 PM | #17 |
Registered User
Join Date: Dec 2009
Location: Pulaski, TN
Posts: 114
|
Re: Make it handle
I am rebuilding a 1969 K20 and I want to soften the ride some. I see that you can order 4, 5, or 6 leaf replacements for the leaf springs. Presently it has 6 leafs can I just remove 2 or 3 and put airbags to make up the difference and if so how do you set them up to make sure you get the best ride along with the ability to carry a load once in a blue moon.
West
__________________
West My Project and Photo Album http://67-72chevytrucks.com/vboard/s...d.php?t=378159 http://67-72chevytrucks.com/vboard/a...hp?albumid=641 |
02-23-2011, 05:32 PM | #18 |
needs more $$$
Join Date: Mar 2004
Location: Sacramento
Posts: 1,936
|
Re: Make it handle
Rob...love reading your posts. They are one of the most informative ones out there and it's like reading a great blog. About these sway bars and the issues you are seeing with C10 versions...tell us you are working on a solution!? Your list is getting good: rear shock mounts [done], longer track bar [done], bolt in r&p [pending], lca caster mod [pending], sway bar [maybe?], rear sway bar [would love to see].
__________________
1970 2wd Blazer |
02-23-2011, 05:38 PM | #19 | |
Registered User
Join Date: Apr 2001
Location: DALLAS,TX
Posts: 21,947
|
Re: Make it handle
Quote:
Rob, you sir have my utmost respect.
__________________
67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... Cubic inches is like Indiana Jones with a cheap pistol. |
|
02-23-2011, 06:00 PM | #20 |
Registered User
Join Date: Apr 2007
Location: Elk Grove, CA
Posts: 375
|
Re: Make it handle
Jeez I thought you said you weren't going to rant! But I'm glad you did and I agree! Often I had wondered how they determined what a "general" rate would be for an "upgraded" sway bar. Also how consistent a solid bar would be vs. a hollow one. I've been looking at Schroeder sway bars online, hollow with splined ends and arms. You probably know of them since they're out of Burbank. It seems like a MUCH better approach, but I have no clue how to determine what rate, arm length, bar diameter etc. Seems like it could be fairly easy to bolt the bushing mounts to the bottom of the frame and check different bars and adjust the different arm lengths. Test time for JT!?
__________________
1964 C10 Shortened Shortbed Cammed LQ9 P&P 1967 C10 Trophy Truck BB 438 (soon to be worked on again) |
02-24-2011, 12:34 PM | #21 |
Senior Member
Join Date: Jul 2010
Location: Dandridge, Tn. USA
Posts: 2,226
|
Re: Make it handle
WEST9378 - Try to stick with a reasonable aproach, and you'l get good results. If you start with the leafs, lets say that the top spring with the eye is #1, and the count down from there to the shortest #6. Keep 1,2, & 3. pull #4, keep #5, pull #6. Use a hand gringer/sander to round off and radius the ends of the springs. Get some teflon liner to put between the leafs (speedway, Eaton, ..) and reassemble. Call Helwig and get a 1" rear sway bar. From RideTech, use pt # ARK2004, with a shrader fill kit. But here's the catch, when you get it done, you have to post up the results. OK?
I have some more to post up later, but i have a deadline to meat this morning. Have a great day all.
__________________
GoodGuys 2012 Pro-Truck Champion 2012 Truckin' Throwdown Champion GoodGuys 2011 National Champion 2011 Truckin' Throwdown Champion GoodGuys 2010 National Champion Proud to put our products up against all others! |
02-28-2011, 11:44 PM | #22 |
Senior Member
Join Date: Jul 2010
Location: Dandridge, Tn. USA
Posts: 2,226
|
Re: Make it handle
Welcome March Madness. last weekend we attended the "Run To The Coast" event in El Toro, Ca. RTTC is a pro touring tri-athelon of sorts, with an autocross, a speed-stop, and a 1.8 mile road coarse. We ran the 'Bullit and had a great time. Only two ther trucks in attendance of the 70+ competetors, Rob Phillips - Hotchkis 69 C-10, and the Magnaflow 37 chevy. Once stats are released, I'll post them up. Show season starts soon, and that means more racing for us. - I'm ready to go. Weight is becoming our limiting factor. 1. Trucks have a naturally high CG, hey there trucks, if not they would be just cars. 2. there nose heavy, again, there trucks, its in there nature. 3. there just heavy. We're at 58.7% ft weight on the 'Bullit, which is not good, but better than the 59.6% it used to be. So keep this in mind. Move everything you can, DOWN, and BACK. Now, get in the garage, and get ready for the upcoming season. See you somewhere.
__________________
GoodGuys 2012 Pro-Truck Champion 2012 Truckin' Throwdown Champion GoodGuys 2011 National Champion 2011 Truckin' Throwdown Champion GoodGuys 2010 National Champion Proud to put our products up against all others! |
03-01-2011, 05:57 PM | #23 |
Senior Member
Join Date: Jul 2010
Location: Dandridge, Tn. USA
Posts: 2,226
|
Re: Make it handle
Hmmm, OK, Gravity is pulling down on you, or your truck, with the force of one G. That is a static force. In a corner, centripedal, or lateral force is created when the vehicle turns. If the truck (car) was perfectly balanced, and the tires kept the contact patch perfect, then at 1G lateral it would slide sideways as soon as it overcomes 1G of natural gravity. Just remember, gravity sucks. lol. only through downforce created by air, or a bank in the corner is it possible to pass up 1G lateral (in a car, on pavement.)
__________________
GoodGuys 2012 Pro-Truck Champion 2012 Truckin' Throwdown Champion GoodGuys 2011 National Champion 2011 Truckin' Throwdown Champion GoodGuys 2010 National Champion Proud to put our products up against all others! |
03-10-2011, 11:36 AM | #24 |
Senior Member
Join Date: Jul 2010
Location: Dandridge, Tn. USA
Posts: 2,226
|
Re: Make it handle
Today we're heading to Scottsdale, Az, for the spring Good-Guys show. I'll snap some picts of cool stuff for you. Hope to run into Nate Porter and chat suspension and stuff. We'll be autocrossing the 'Bullit, so stop by if your in range. This is usually a really fun show.
__________________
GoodGuys 2012 Pro-Truck Champion 2012 Truckin' Throwdown Champion GoodGuys 2011 National Champion 2011 Truckin' Throwdown Champion GoodGuys 2010 National Champion Proud to put our products up against all others! |
03-10-2011, 03:16 PM | #25 |
Registered User
Join Date: Nov 2001
Location: Springfield, MO
Posts: 2,929
|
Re: Make it handle
good luck it would be a blast to watch u thrash on the truck.
Dave
__________________
Dave 1968 Custom Chevy with turbo charged 5.3 gen III 4l80e swap 1967-71 GMC 3/4 ton long step 4x4 (not sure what year exactly?) "A good friend will bail you out of jail...but a true friend will be sitting next to you saying "that was frekin awesome". "If it doesn't fit force it...If it breaks then it needed to be replaced anyway!" |
Bookmarks |
|
|