Ok Boys and Girls it's Storytime - Page 16 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

regan wilson · 11-20-2018, 11:42 AM

[IMG]

[/IMG]

regan wilson · 11-20-2018, 11:44 AM

[IMG]

[/IMG]

regan wilson · 11-20-2018, 11:45 AM

[IMG]

[/IMG]

regan wilson · 11-20-2018, 11:50 AM

[IMG]

[/IMG]

Average hp and tq from 6300 to 7800 1270hp and 950tq.
This was on Sunoco Maximal fuel. Had we tried the Q16 again it would have been worth 3 percent more power or better.

hotrod 80 · 11-20-2018, 10:56 PM

POWA house right there . BA #s man . Lots of hard work to get to that point .

regan wilson · 11-22-2018, 08:56 AM

Thanks Hotrod. Over 2 years to get the motor together. Once we get my header situation figured out I can start putting it back together.

PhilaTruck · 11-25-2018, 10:29 AM

I’ll be happy with a little more than half that. Thx for the Thanksgiving update!

71Dragtruck · 12-12-2018, 10:50 AM

Hey Regan, pretty sure I recall you were running a Turbo 400 with a 2.48 1st gear correct? If so are you still running that ratio? I know you are on a throttle stop, but when you have done a full launch how was the 1st to 2nd shift?

I'm running a 4.56 rear gear now with a 32.6" tire (next tire will be a 33), I'm building a new 400 for it and thinking that the 2.48 might be a bit too violent behind a 615ci BBC off the line, motor should be in that 1200hp 900trq give or take range, est shift point 7800, but until its on the dyno these are all just numbers off of past builds the shop has done.

Anyway wondering if I should do a 2.10 1st gear instead.

regan wilson · 12-12-2018, 01:16 PM

I have been running a 2.10 low with a 1.31 second gear for years now. It can still be a little violent. The stock ratio is definitely a no go.
Posted via Mobile Device

71Dragtruck · 12-12-2018, 01:40 PM

Quote:

Originally Posted by regan wilson

I have been running a 2.10 low with a 1.31 second gear for years now. It can still be a little violent. The stock ratio is definitely a no go.
Posted via Mobile Device

Thanks, thinking I'll have to do the same as 2.48 will be brutal.

nxtruck · 12-13-2018, 03:25 PM

Regan or 71Dragtruck,

Have either one of you guys tried a glide? I've been toying with that idea myself, but am making nowhere near the power that either of you two are making. I know there are a few different low gear choices available for the glide. My main reason for considering a glide is traction on a less than ideal track surface. Just curious if anyone has went that route.

71Dragtruck · 12-13-2018, 04:01 PM

Quote:

Originally Posted by nxtruck

Regan or 71Dragtruck,

Have either one of you guys tried a glide? I've been toying with that idea myself, but am making nowhere near the power that either of you two are making. I know there are a few different low gear choices available for the glide. My main reason for considering a glide is traction on a less than ideal track surface. Just curious if anyone has went that route.

I've been talking to Hutch about building me a trans, he said if my truck 3700# was a couple hundred lighter he would suggest a glide, but then I'd be back to a 2 piece drive shaft for sure.

nxtruck · 12-13-2018, 05:09 PM

Quote:

Originally Posted by 71Dragtruck

I've been talking to Hutch about building me a trans, he said if my truck 3700# was a couple hundred lighter he would suggest a glide, but then I'd be back to a 2 piece drive shaft for sure.

Well,

I'd say Hutch ought to know, then. I just figured that, with that kind of power, maybe a 2-speed might calm things down enough to be of benefit. Sounds like you have things covered, traction-wise, with the 4-link and being more able to compensate for the hit of a 3-speed.

71Dragtruck · 12-13-2018, 06:50 PM

Some guys with 400’s that have the valve body to run the trans brake in 2nd have launched that way too I guess, if your trans is set up for it. I’ve never seen it, just read over on the yellow bullet guys talking about it.

Sorry for taking your thread off topic Regan, guess I should have started a new one.

regan wilson · 12-13-2018, 08:53 PM

Quote:

Originally Posted by 71Dragtruck

Some guys with 400’s that have the valve body to run the trans brake in 2nd have launched that way too I guess, if your trans is set up for it. I’ve never seen it, just read over on the yellow bullet guys talking about it.

Sorry for taking your thread off topic Regan, guess I should have started a new one.

No problem 71. I honestly just like my 3 speed. Powerglides kinda bore me. I have driven quite a few racecars with them. My ratios work good for me on the throttle stop because I come off the stop with a 5.97 ratio (in 2nd gear).

nxtruck · 12-14-2018, 06:27 PM

Yep, sorry about the thread hi-jack, too. You guys kinda reminded me about one of my off-season projects. I do appreciate the info from you both.

RICKSRAT · 12-15-2018, 09:27 AM

Quote:

Originally Posted by regan wilson

[IMG]

[/IMG]

Hey Regan good to see Motor done and really good #'s. Would like to see Truck run at the track next time you go.

RICKSRAT · 12-15-2018, 09:46 AM

Quote:

Originally Posted by 71Dragtruck

Hey Regan, pretty sure I recall you were running a Turbo 400 with a 2.48 1st gear correct? If so are you still running that ratio? I know you are on a throttle stop, but when you have done a full launch how was the 1st to 2nd shift?

I'm running a 4.56 rear gear now with a 32.6" tire (next tire will be a 33), I'm building a new 400 for it and thinking that the 2.48 might be a bit too violent behind a 615ci BBC off the line, motor should be in that 1200hp 900trq give or take range, est shift point 7800, but until its on the dyno these are all just numbers off of past builds the shop has done.

Anyway wondering if I should do a 2.10 1st gear instead.

71 Dragtruck Just had TransKing freshen my 400 and added 300M input & main shafts ; clutch hub and a 2.22 1st gear from Coan. If you have any questions let me know maybe can help out.

regan wilson · 12-16-2018, 11:14 AM

Rick thanks for the compliments. I see you found the extra power you were looking for. You been keeping that a secret huh? My plans right now are to have the truck back together by the end of January (fingers crossed). Then go test in February, maybe at Extreme Raceway or Ennis. I plan on my first race being the Houston Divisional March 22nd.

RICKSRAT · 12-16-2018, 04:02 PM

Yes we did find a few more hp. Motor didn’t like the Sniper Jr so had some more work done to the Super Victor and a few other small tweaks. I Passed by The new track towards Dallas last month and Looks like a nice track. Good luck and if you need any pit crew help let me know. I could help you out in Houston as I’m only an Hour from the track

regan wilson · 12-16-2018, 07:50 PM

Quote:

Originally Posted by RICKSRAT

Yes we did find a few more hp. Motor didn’t like the Sniper Jr so had some more work done to the Super Victor and a few other small tweaks. I Passed by The new track towards Dallas last month and Looks any like a nice track. Good luck and if you need any pit crew help let me know. I could help you out in Houston as I’m only an Hour from the track

We'll see how everything goes. You are always welcome to come hang out. I asked for some tire checkers in Oklahoma a few years ago! Didn't get any takers.Your numbers on that Pump Gas deal are way more impressive than my deal. That's Awesome.

regan wilson · 12-22-2018, 10:21 AM

I just brought the truck back home from the chassis shop. My old friend Tony Smith that built the cage,rear end and headers. Tony cut the 2 1/4 step out of the headers and rebuilt them with 2 3/8 all the way to the 5' collectors. He also made me a neat little alternator bracket and a T-Stop solenoid bracket that will double as a spring bracket for the throttle.[IMG]

[/IMG]

regan wilson · 12-22-2018, 10:24 AM

While we were at it we took the #7 and #8 tubes outside the frame[IMG]

[/IMG] rails.

regan wilson · 12-22-2018, 10:27 AM

[IMG]

[/IMG]

regan wilson · 12-22-2018, 10:30 AM

Solenoid Bracket[IMG]

[/IMG]

11-20-2018, 11:42 AM	#376
regan wilson Registered User Join Date: Mar 2008 Location: tyler texas Posts: 1,538	Re: Ok Boys and Girls it's Storytime [IMG][/IMG] __________________ NHRA Super Street 469C It only runs 10.90 at 156 mph

11-20-2018, 11:44 AM	#377
regan wilson Registered User Join Date: Mar 2008 Location: tyler texas Posts: 1,538	Re: Ok Boys and Girls it's Storytime [IMG][/IMG] __________________ NHRA Super Street 469C It only runs 10.90 at 156 mph

11-20-2018, 11:45 AM	#378
regan wilson Registered User Join Date: Mar 2008 Location: tyler texas Posts: 1,538	Re: Ok Boys and Girls it's Storytime [IMG][/IMG] __________________ NHRA Super Street 469C It only runs 10.90 at 156 mph

11-20-2018, 11:50 AM	#379
regan wilson Registered User Join Date: Mar 2008 Location: tyler texas Posts: 1,538	Re: Ok Boys and Girls it's Storytime [IMG][/IMG] Average hp and tq from 6300 to 7800 1270hp and 950tq. This was on Sunoco Maximal fuel. Had we tried the Q16 again it would have been worth 3 percent more power or better. __________________ NHRA Super Street 469C It only runs 10.90 at 156 mph

11-20-2018, 10:56 PM	#380
hotrod 80 mini truck racer Join Date: Aug 2006 Location: Baytown , texas Posts: 3,010	Re: Ok Boys and Girls it's Storytime POWA house right there . BA #s man . Lots of hard work to get to that point . __________________ 1949 5-window 1969 Camaro 1976 Chevy Luv yellow 1978 Chevy Luv Blue 1976 Chevy Luv Black 1979 Firebird Flooded in Harvey 1999 F350 Dually 2005 GMC Sierra 4.8 RCSB 2014 Explorer (wifes) My build :http://67-72chevytrucks.com/vboard/s...d.php?t=399148 Build #2: http://67-72chevytrucks.com/vboard/s...d.php?t=653583

11-22-2018, 08:56 AM	#381
regan wilson Registered User Join Date: Mar 2008 Location: tyler texas Posts: 1,538	Re: Ok Boys and Girls it's Storytime Thanks Hotrod. Over 2 years to get the motor together. Once we get my header situation figured out I can start putting it back together. __________________ NHRA Super Street 469C It only runs 10.90 at 156 mph

11-25-2018, 10:29 AM	#382
PhilaTruck Right on the line, baby! Join Date: Oct 2003 Location: Phila, PA 19130 Posts: 1,486	Re: Ok Boys and Girls it's Storytime I’ll be happy with a little more than half that. Thx for the Thanksgiving update! __________________ 83 GMC 406 th400/3.73 Eaton Truetrac posi, headers, x pipe, & racePros. Tubular control arms, lowering rear springs, caltracs. Still ugly, but getting built right, although slowly Click and scroll down for site vendors! Subscribe here!

12-12-2018, 10:50 AM	#383
71Dragtruck Registered User Join Date: Jun 2004 Location: Saskatchewan, Canada Posts: 1,368	Re: Ok Boys and Girls it's Storytime Hey Regan, pretty sure I recall you were running a Turbo 400 with a 2.48 1st gear correct? If so are you still running that ratio? I know you are on a throttle stop, but when you have done a full launch how was the 1st to 2nd shift? I'm running a 4.56 rear gear now with a 32.6" tire (next tire will be a 33), I'm building a new 400 for it and thinking that the 2.48 might be a bit too violent behind a 615ci BBC off the line, motor should be in that 1200hp 900trq give or take range, est shift point 7800, but until its on the dyno these are all just numbers off of past builds the shop has done. Anyway wondering if I should do a 2.10 1st gear instead. __________________ Speed is just a matter of money, question is how fast can you afford to go? 8.95@148.97mph all motor haven't tried bottle yet Sponsored by: Getz Oilfield Consulting Hard Candy Customs

12-12-2018, 01:16 PM	#384
regan wilson Registered User Join Date: Mar 2008 Location: tyler texas Posts: 1,538	Re: Ok Boys and Girls it's Storytime I have been running a 2.10 low with a 1.31 second gear for years now. It can still be a little violent. The stock ratio is definitely a no go. Posted via Mobile Device

12-13-2018, 03:25 PM	#386
nxtruck Registered User Join Date: Jun 2006 Location: Jackson, Mo. Posts: 607	Re: Ok Boys and Girls it's Storytime Regan or 71Dragtruck, Have either one of you guys tried a glide? I've been toying with that idea myself, but am making nowhere near the power that either of you two are making. I know there are a few different low gear choices available for the glide. My main reason for considering a glide is traction on a less than ideal track surface. Just curious if anyone has went that route. __________________ Chris 1966 Chevy C10 LWB, 434 sbc, TH350, 12-bolt, factory suspension, pump gas 7.02 @ 95.8, 1.45 60' 1965 Chevy C10 LWB, 355 sbc, TH350, daily driver

12-13-2018, 06:50 PM	#389
71Dragtruck Registered User Join Date: Jun 2004 Location: Saskatchewan, Canada Posts: 1,368	Re: Ok Boys and Girls it's Storytime Some guys with 400’s that have the valve body to run the trans brake in 2nd have launched that way too I guess, if your trans is set up for it. I’ve never seen it, just read over on the yellow bullet guys talking about it. Sorry for taking your thread off topic Regan, guess I should have started a new one. __________________ Speed is just a matter of money, question is how fast can you afford to go? 8.95@148.97mph all motor haven't tried bottle yet Sponsored by: Getz Oilfield Consulting Hard Candy Customs

12-14-2018, 06:27 PM	#391
nxtruck Registered User Join Date: Jun 2006 Location: Jackson, Mo. Posts: 607	Re: Ok Boys and Girls it's Storytime Yep, sorry about the thread hi-jack, too. You guys kinda reminded me about one of my off-season projects. I do appreciate the info from you both. __________________ Chris 1966 Chevy C10 LWB, 434 sbc, TH350, 12-bolt, factory suspension, pump gas 7.02 @ 95.8, 1.45 60' 1965 Chevy C10 LWB, 355 sbc, TH350, daily driver

12-16-2018, 11:14 AM	#394
regan wilson Registered User Join Date: Mar 2008 Location: tyler texas Posts: 1,538	Re: Ok Boys and Girls it's Storytime Rick thanks for the compliments. I see you found the extra power you were looking for. You been keeping that a secret huh? My plans right now are to have the truck back together by the end of January (fingers crossed). Then go test in February, maybe at Extreme Raceway or Ennis. I plan on my first race being the Houston Divisional March 22nd. __________________ NHRA Super Street 469C It only runs 10.90 at 156 mph

12-16-2018, 04:02 PM	#395
RICKSRAT Registered User Join Date: Apr 2000 Location: LAKE JACKSON TEXAS Posts: 343	Re: Ok Boys and Girls it's Storytime Yes we did find a few more hp. Motor didn’t like the Sniper Jr so had some more work done to the Super Victor and a few other small tweaks. I Passed by The new track towards Dallas last month and Looks like a nice track. Good luck and if you need any pit crew help let me know. I could help you out in Houston as I’m only an Hour from the track __________________ '72 SWB 3,600# Indigo Blue , Sunset Racing Pump Gas 582" 1,002hp / 833tq ,Transking 400 W/ Transbrake, Moser Dana 60 w/4.30 Old Motor: 60'. 1.43 1/8 6.58@104.64 1/4. 10.42@127.10 Nitrous: 60'. 1.28 1/8. 6.15@ 112.02 1/4. 9.75@ 136.32 Last edited by RICKSRAT; 12-16-2018 at 04:25 PM.

12-22-2018, 10:21 AM	#397
regan wilson Registered User Join Date: Mar 2008 Location: tyler texas Posts: 1,538	Re: Ok Boys and Girls it's Storytime I just brought the truck back home from the chassis shop. My old friend Tony Smith that built the cage,rear end and headers. Tony cut the 2 1/4 step out of the headers and rebuilt them with 2 3/8 all the way to the 5' collectors. He also made me a neat little alternator bracket and a T-Stop solenoid bracket that will double as a spring bracket for the throttle.[IMG][/IMG] __________________ NHRA Super Street 469C It only runs 10.90 at 156 mph



Register or Log In To remove these advertisements.

12-22-2018, 10:24 AM	#398
regan wilson Registered User Join Date: Mar 2008 Location: tyler texas Posts: 1,538	Re: Ok Boys and Girls it's Storytime While we were at it we took the #7 and #8 tubes outside the frame[IMG][/IMG] rails. __________________ NHRA Super Street 469C It only runs 10.90 at 156 mph

12-22-2018, 10:27 AM	#399
regan wilson Registered User Join Date: Mar 2008 Location: tyler texas Posts: 1,538	Re: Ok Boys and Girls it's Storytime [IMG][/IMG] __________________ NHRA Super Street 469C It only runs 10.90 at 156 mph

12-22-2018, 10:30 AM	#400
regan wilson Registered User Join Date: Mar 2008 Location: tyler texas Posts: 1,538	Re: Ok Boys and Girls it's Storytime Solenoid Bracket[IMG][/IMG] __________________ NHRA Super Street 469C It only runs 10.90 at 156 mph

Register or Log In To remove these advertisements.