DURG's Black 65 C10 - Page 16 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

aggie91 · 01-01-2015, 12:46 AM

Outstanding!

Remind me of your wheel/tire sizes for this truck please?

DURG · 01-02-2015, 01:11 PM

22x9 and 20x8.5

meltmetal · 01-02-2015, 01:15 PM

It looks fantastic!

LDO · 02-16-2015, 05:32 PM

just WOW....

DURG · 03-14-2015, 02:19 PM

Doing just a little on the truck. I refurbed the stock shroud. I was thinking about using a metal barrel shroud like on my 62 Impala but it looked like the stock one would be salvageable and fit with the raised crossmember and aluminum radiator. Everything is tight with the front GM serpentine belt setup. I also got the steering column and steering linkage bolted up where it's going to be. This was close everywhere because I did not want to run a heim joint and 3rd universal.

northern 85 · 03-15-2015, 08:44 AM

Looking good,shes going to make some smoke this summer!

DURG · 03-15-2015, 09:05 AM

I doubt it. I have to do a complete wiring harness install as well as exhaust, brake lines. windshield gasket, bed wood install and a lot more. My time is really limited. Working OT and the boy has travel baseball and basketball. The wife is training for an Ironman in Canada so we will be heading up there for a week. Just really busy. It was enjoyable working on the truck so that is what is important. No timeline. I can retire in 23 months so it may not even be done by then, but that's OK too.

DURG · 07-17-2015, 07:17 AM

Did a couple things on the truck for a change yesterday. Installed the starter, bolted up torque converter, and made a throttle linkage with heim ends on each end and put on double throttle return springs. I got this cool vintage Pepsi cooler from my father in law to take with the truck or my Impala to shows. Usually I see the Coke ones but I thought this one was kind of cool.

**Hart_Rod** · 07-17-2015, 07:49 AM

Quote:

Originally Posted by DURG

Did a couple things on the truck for a change yesterday. Installed the starter, bolted up torque converter, and made a throttle linkage with heim ends on each end and put on double throttle return springs. I got this cool vintage Pepsi cooler from my father in law to take with the truck or my Impala to shows. Usually I see the Coke ones but I thought this one was kind of cool.

Looks nice! The Pepsi ones are harder to find.

Coursey · 07-17-2015, 10:01 AM

Quote:

Originally Posted by DURG

Did a couple things on the truck for a change yesterday. Installed the starter, bolted up torque converter, and made a throttle linkage with heim ends on each end and put on double throttle return springs. I got this cool vintage Pepsi cooler from my father in law to take with the truck or my Impala to shows. Usually I see the Coke ones but I thought this one was kind of cool.

That is a nice one. I have a Pleasure Chest and Magikooler

cioutlaw · 07-07-2016, 10:18 AM

Quote:

Originally Posted by DURG

It ain't much but at least I did something on the truck. I installed a Cherokee front door check with the two detent spots. Nice and smooth.

Fits: 1984 - 2001 Jeep Cherokee Front Left or Right Doors
Mopar Part #55235571AB

I know this is a couple years old but what is the benefit of the jeep door stops over the stock ones?

Edit: I found a thread elsewhere that explained.

DURG · 10-23-2016, 08:33 AM

Has a mid stop position and keeps the door from over opening and damaging trim strip.

northern 85 · 10-23-2016, 08:53 AM

I should do this too!

DURG · 10-23-2016, 09:02 AM

Actually ventured out to the garage for a couple minor things. Installed hinges on the PB relocation brackets and installed the Wilwood prop valve. Not much but it's more than I have been doing.

northern 85 · 10-23-2016, 09:05 AM

Nice you do such clean work!!

gringoloco · 10-23-2016, 10:46 AM

Keep chipping away. This is one of my favorites, can't wait to see it compkete

s4tund8 · 04-27-2017, 05:50 AM

May I ask what steering column you used with the factory deluxe wheel?

DURG · 12-28-2017, 06:43 PM

I have a custom length Ididit column.

DURG · 12-28-2017, 06:49 PM

Been working on truck again. Completed exhaust, brakelines. Popped windshield out and cleaned most of the old sealant off. Put tank back in with an NOS filler neck. Filled power steering, master. Shortened snorkel of a stock top air cleaner and drilled a bunch of 2" holes around the perimeter. I left the factory stenciling on instead of putting holes there. Not 100% sold on this air cleaner top yet though.

**lolife99** · 12-28-2017, 09:58 PM

Always liked this truck build

niterider65 · 12-28-2017, 10:38 PM

sweet build man it takes a lot of time but man its a sweet ride just re read the hole build up till now keep up the good work .

gringoloco · 12-28-2017, 11:39 PM

I dig the air cleaner, maybe clean up the holes with a dimple die?

northern 85 · 12-29-2017, 06:15 AM

I like it!!! Is there a way you could put a flare on the end of the snorkel?

timmytimm3 · 12-29-2017, 09:29 AM

Thanks for updating the thread. One of my favorite builds here and an inspiration to keep working on mine.

Happy New Year! Keep warm

66C10LB · 12-29-2017, 04:11 PM

That fan shroud looks fantastic. Did you have to repair any cracks or holes? If so, did you use a JB Weld product or other?

01-01-2015, 12:46 AM	#376
aggie91 I'm just glad to be here! Join Date: Jan 2008 Location: Longview, TX Posts: 4,788	Re: DURG's Black 65 C10 Outstanding! Remind me of your wheel/tire sizes for this truck please? __________________ Karl 1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues) http://67-72chevytrucks.com/vboard/s...d.php?t=372424 The LST Challenge: http://67-72chevytrucks.com/vboard/s...=1#post7812257 Korbin's 1st Square: "Sunburn" http://67-72chevytrucks.com/vboard/s...d.php?t=418618 1985 GMC Sierra: "White Trash", Korbin's 2nd now... http://67-72chevytrucks.com/vboard/s...d.php?t=632305 Henry - 1984 Chevrolet, Owen's 1st Square

01-02-2015, 01:11 PM	#377
DURG Registered User Join Date: May 2012 Location: Scarborough ME. Posts: 413	Re: DURG's Black 65 C10 22x9 and 20x8.5 __________________ 1962 Impala SS 383 stroker Tremec TKO 600 Black 1965 SWB BBW Fleetside Custom Cab PB Coilover setup Black 2003 100th Anniversary Road King Classic Silver Black

01-02-2015, 01:15 PM	#378
meltmetal Registered User Join Date: Jan 2007 Location: new york Posts: 61	Re: DURG's Black 65 C10 It looks fantastic!

02-16-2015, 05:32 PM	#379
LDO Registered User Join Date: Feb 2011 Location: Senatobia, MS Posts: 1,296	Re: DURG's Black 65 C10 just WOW.... __________________ Once a Marine, always a Marine! My (Her) 57 Build "Beverly" My 66 Build "Betty" My 85 C10 "Old Blue" Help Me Find "Old Blue" OLD BLUE PART II

03-14-2015, 02:19 PM	#380
DURG Registered User Join Date: May 2012 Location: Scarborough ME. Posts: 413	Re: DURG's Black 65 C10 Doing just a little on the truck. I refurbed the stock shroud. I was thinking about using a metal barrel shroud like on my 62 Impala but it looked like the stock one would be salvageable and fit with the raised crossmember and aluminum radiator. Everything is tight with the front GM serpentine belt setup. I also got the steering column and steering linkage bolted up where it's going to be. This was close everywhere because I did not want to run a heim joint and 3rd universal. __________________ 1962 Impala SS 383 stroker Tremec TKO 600 Black 1965 SWB BBW Fleetside Custom Cab PB Coilover setup Black 2003 100th Anniversary Road King Classic Silver Black

03-15-2015, 08:44 AM	#381
northern 85 Registered User Join Date: Mar 2005 Location: Fairfield Maine Posts: 1,759	Re: DURG's Black 65 C10 Looking good,shes going to make some smoke this summer!

03-15-2015, 09:05 AM	#382
DURG Registered User Join Date: May 2012 Location: Scarborough ME. Posts: 413	Re: DURG's Black 65 C10 I doubt it. I have to do a complete wiring harness install as well as exhaust, brake lines. windshield gasket, bed wood install and a lot more. My time is really limited. Working OT and the boy has travel baseball and basketball. The wife is training for an Ironman in Canada so we will be heading up there for a week. Just really busy. It was enjoyable working on the truck so that is what is important. No timeline. I can retire in 23 months so it may not even be done by then, but that's OK too. __________________ 1962 Impala SS 383 stroker Tremec TKO 600 Black 1965 SWB BBW Fleetside Custom Cab PB Coilover setup Black 2003 100th Anniversary Road King Classic Silver Black

07-17-2015, 07:17 AM	#383
DURG Registered User Join Date: May 2012 Location: Scarborough ME. Posts: 413	Re: DURG's Black 65 C10 Did a couple things on the truck for a change yesterday. Installed the starter, bolted up torque converter, and made a throttle linkage with heim ends on each end and put on double throttle return springs. I got this cool vintage Pepsi cooler from my father in law to take with the truck or my Impala to shows. Usually I see the Coke ones but I thought this one was kind of cool. __________________ 1962 Impala SS 383 stroker Tremec TKO 600 Black 1965 SWB BBW Fleetside Custom Cab PB Coilover setup Black 2003 100th Anniversary Road King Classic Silver Black

10-23-2016, 08:33 AM	#387
DURG Registered User Join Date: May 2012 Location: Scarborough ME. Posts: 413	Re: DURG's Black 65 C10 Has a mid stop position and keeps the door from over opening and damaging trim strip. __________________ 1962 Impala SS 383 stroker Tremec TKO 600 Black 1965 SWB BBW Fleetside Custom Cab PB Coilover setup Black 2003 100th Anniversary Road King Classic Silver Black

10-23-2016, 08:53 AM	#388
northern 85 Registered User Join Date: Mar 2005 Location: Fairfield Maine Posts: 1,759	Re: DURG's Black 65 C10 I should do this too!

10-23-2016, 09:02 AM	#389
DURG Registered User Join Date: May 2012 Location: Scarborough ME. Posts: 413	Re: DURG's Black 65 C10 Actually ventured out to the garage for a couple minor things. Installed hinges on the PB relocation brackets and installed the Wilwood prop valve. Not much but it's more than I have been doing. __________________ 1962 Impala SS 383 stroker Tremec TKO 600 Black 1965 SWB BBW Fleetside Custom Cab PB Coilover setup Black 2003 100th Anniversary Road King Classic Silver Black

10-23-2016, 09:05 AM	#390
northern 85 Registered User Join Date: Mar 2005 Location: Fairfield Maine Posts: 1,759	Re: DURG's Black 65 C10 Nice you do such clean work!!

10-23-2016, 10:46 AM	#391
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: DURG's Black 65 C10 Keep chipping away. This is one of my favorites, can't wait to see it compkete __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

04-27-2017, 05:50 AM	#392
s4tund8 Registered User Join Date: Feb 2012 Location: Houston Texas Posts: 5	Re: DURG's Black 65 C10 May I ask what steering column you used with the factory deluxe wheel?

12-28-2017, 06:43 PM	#393
DURG Registered User Join Date: May 2012 Location: Scarborough ME. Posts: 413	Re: DURG's Black 65 C10 I have a custom length Ididit column. __________________ 1962 Impala SS 383 stroker Tremec TKO 600 Black 1965 SWB BBW Fleetside Custom Cab PB Coilover setup Black 2003 100th Anniversary Road King Classic Silver Black



Register or Log In To remove these advertisements.

12-28-2017, 06:49 PM	#394
DURG Registered User Join Date: May 2012 Location: Scarborough ME. Posts: 413	Re: DURG's Black 65 C10 Been working on truck again. Completed exhaust, brakelines. Popped windshield out and cleaned most of the old sealant off. Put tank back in with an NOS filler neck. Filled power steering, master. Shortened snorkel of a stock top air cleaner and drilled a bunch of 2" holes around the perimeter. I left the factory stenciling on instead of putting holes there. Not 100% sold on this air cleaner top yet though. Attached Images __________________ 1962 Impala SS 383 stroker Tremec TKO 600 Black 1965 SWB BBW Fleetside Custom Cab PB Coilover setup Black 2003 100th Anniversary Road King Classic Silver Black

12-28-2017, 09:58 PM	#395
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,700	Re: DURG's Black 65 C10 Always liked this truck build __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

12-28-2017, 10:38 PM	#396
niterider65 Registered User Join Date: Jun 2011 Location: colleyville tx Posts: 624	Re: DURG's Black 65 C10 sweet build man it takes a lot of time but man its a sweet ride just re read the hole build up till now keep up the good work .

12-28-2017, 11:39 PM	#397
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,921	Re: DURG's Black 65 C10 I dig the air cleaner, maybe clean up the holes with a dimple die? __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

12-29-2017, 06:15 AM	#398
northern 85 Registered User Join Date: Mar 2005 Location: Fairfield Maine Posts: 1,759	Re: DURG's Black 65 C10 I like it!!! Is there a way you could put a flare on the end of the snorkel?

12-29-2017, 09:29 AM	#399
timmytimm3 Registered User Join Date: Apr 2012 Location: CT Posts: 265	Re: DURG's Black 65 C10 Thanks for updating the thread. One of my favorite builds here and an inspiration to keep working on mine. Happy New Year! Keep warm __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=742865 66 SWB, C4 Dropmember timmytimm3 on IG "If you don't have time to do it right the first time, when will you?" -Dad

12-29-2017, 04:11 PM	#400
66C10LB Registered User Join Date: Jul 2016 Location: West Kelowna, BC, Canada Posts: 204	Re: DURG's Black 65 C10 That fan shroud looks fantastic. Did you have to repair any cracks or holes? If so, did you use a JB Weld product or other?

Register or Log In To remove these advertisements.