05-05-2012, 09:32 PM | #3976 |
Old member
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,945
|
Re: What did you do to your truck today!
I could live with that. What system did you use?
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. |
05-05-2012, 10:29 PM | #3977 |
Registered User
Join Date: Feb 2012
Location: yelm Wa.
Posts: 423
|
Re: What did you do to your truck today!
I kinda pieced it together, plates cups and dominator 2500s in the front coni-rec in the rear. York pump and padel valves
Posted via Mobile Device
__________________
1971 chevy c10 cheyenne. Bagged. New paint and some other mods. 1999 ford f350 superduty 7.3 powerstroke everything banks 1975 c10 swb "parts runner" <----SOLD NorthWest C10's http://www.facebook.com/#!/groups/Norhtwestc10s/ |
05-05-2012, 11:59 PM | #3978 |
Registered User
Join Date: Jan 2011
Location: Austin, TX
Posts: 632
|
Re: What did you do to your truck today!
Got it epoxy'ed. Need to scuff and reshoot tomorrow to blend filler in, but making progress.
__________________
www.tomthetruck.blogspot.com <-- Aka build thread. |
05-06-2012, 01:04 AM | #3979 |
Registered User
Join Date: Jun 2004
Location: Beeville, Texas
Posts: 1,943
|
Re: What did you do to your truck today!
The old truck hasn't been moved for about three months, and hasn't been ran for about one month. I try to get over there and drive it around at least twice a month to keep everything going, skipped a few times so it needed attention. I let it sit too long and the carburetor got trashed, a rebuild and new fuel filters got it running like a top. It felt great to get it going again and take it for a drive, I'm going to take it to the gas station tomorrow and add some Sta-Bil and fresh gas to the tank also. The brakes still work great considering it's been off the road for four years already since I got my welding truck. It's going to get an oil change next week, and the steering column bearings need some attention as well as the turn signal cam. The Suburban is still parked, don't have money to throw at it yet. I know the engine is worn out, I have a used 350 to drop in but don't have time right now. My '84 hasn't needed much, just been going through a lot of gas haha.
__________________
RJD 1984 Chevrolet C30 welding truck 454/SM465 1977 GMC C15 pickup 350/TH350 1970 Chevrolet C20 pickup 350/TH400 1970 Chevrolet K20 Suburban 454/TH350 1969 GMC 8500 478M V6/5 spd winch truck |
05-06-2012, 01:25 AM | #3980 | |
Old member
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,945
|
Re: What did you do to your truck today!
Quote:
Good looking truck to!
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. |
|
05-06-2012, 02:57 AM | #3981 | |
Registered User
Join Date: Feb 2012
Location: yelm Wa.
Posts: 423
|
Re: What did you do to your truck today!
Quote:
Posted via Mobile Device
__________________
1971 chevy c10 cheyenne. Bagged. New paint and some other mods. 1999 ford f350 superduty 7.3 powerstroke everything banks 1975 c10 swb "parts runner" <----SOLD NorthWest C10's http://www.facebook.com/#!/groups/Norhtwestc10s/ |
|
05-06-2012, 08:54 AM | #3982 | |
Registered User
Join Date: Dec 2009
Location: Atlanta, Ga.
Posts: 1,050
|
Re: What did you do to your truck today!
Quote:
is
__________________
I don't think we get smarter as we get older. We just run out of Stupid things to do. |
|
05-06-2012, 10:11 AM | #3983 |
Registered User
Join Date: Apr 2011
Location: Carson City Nevada
Posts: 68
|
Re: What did you do to your truck today!
|
05-06-2012, 10:16 AM | #3984 |
Registered User
Join Date: Apr 2011
Location: Carson City Nevada
Posts: 68
|
Re: What did you do to your truck today!
|
05-06-2012, 06:24 PM | #3985 |
Old member
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,945
|
Re: What did you do to your truck today!
What prize?
I made this this morning coming home from work. http://s1233.photobucket.com/albums/...t=8e4e739a.mp4 Got a picture of the moon to. This was about 6:45am this morning.
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. Last edited by Andy4639; 05-06-2012 at 06:34 PM. |
05-06-2012, 10:16 PM | #3986 |
Registered User
Join Date: Jan 2009
Location: Sandersville, GA
Posts: 298
|
Re: What did you do to your truck today!
Drove it to work Friday. Going back after lunch I noticed a vibration at 30-40 mph. Turned around, took it home and parked it. Came home from church tonight riding with my wife driving her Traverse. When we pulled in the garage I saw the problem. Missing lug nut on the left rear. Jacked her up and tightened the other four. I worked on the brakes about 3 weeks ago and must have left the lug nuts only snugged.
__________________
How 'Bout them Dawgs! '10 Traverse LTZ 03 Silverado Z71 ext cab 99 Yamaha Grizzly 600 72 C10 350/350 sportside bed. 68 C30 flatbed. 350 4-speed. "I've got a good memory, it's just short!" |
05-06-2012, 10:34 PM | #3987 |
Registered User
Join Date: Nov 2008
Location: Petersville KY
Posts: 673
|
Re: What did you do to your truck today!
Just drove it today and stopped at a cruise-in for a few mins. But yesterday I used it to tow home my new to me boat a 1978 Cobra with a 80 hp Mercury!
__________________
Rob 72 C/10 (under reconstruction)(destruction ? LOL) 48 Willys CJ2A 1952 Super "A" Farmall (Grandfather's) |
05-06-2012, 10:51 PM | #3988 |
Registered User
Join Date: Jan 2011
Location: Austin, TX
Posts: 632
|
Re: What did you do to your truck today!
__________________
www.tomthetruck.blogspot.com <-- Aka build thread. |
05-06-2012, 11:15 PM | #3989 |
Registered User
Join Date: Apr 2011
Location: Carson City Nevada
Posts: 68
|
Re: What did you do to your truck today!
|
05-06-2012, 11:29 PM | #3990 |
Registered User
Join Date: Jan 2011
Location: Austin, TX
Posts: 632
|
Re: What did you do to your truck today!
I'm proud of my progress and have to brag via photo one more time now that I have another round on it since yesterday.
Beginning, middle and end! Well nearly, one more scuff coat and final sand to come tomorrow.
__________________
www.tomthetruck.blogspot.com <-- Aka build thread. |
05-06-2012, 11:53 PM | #3991 |
Truck and auto performance nut
Join Date: Feb 2007
Location: McKinney,Texas
Posts: 3,848
|
Re: What did you do to your truck today!
looks great...I need to get around to doing that one of these days. I plan on a Vintage a/c so not sure what I'm waiting on. Oh yeah....after buying that new GMPP 4L85e..... I'm broke again.
can't wait till it arrives and I get it put in. hopefully trucks running by then too!
__________________
Kurt - '68 GMC short step - NIB '09 LY6 6.0L crate motor w/mods, NIB '12 crate 4L85e w/billet 3k stall Circle D, 3.73 posi 12 bolt, DynaTech f-swap headers, 3/4 drop, handling mods, etc. - my toy '72 Chevy LWB C-10 Highlander - 350/350 ps/pb/tilt/ac - not original but close '06 Chevy TrailBlazerSS - LS2/4L70e - little black hot rod SUV - my DD '18 Kia Sorento - wife's econo-driver '95 Chevy S10 - reg cab shortbed, LS, 4.3, auto... my '68's powertrain and chassis build -links broken A surprise phase - carb to efi -links broken |
05-07-2012, 12:05 AM | #3992 | |
Registered User
Join Date: Jan 2011
Location: Austin, TX
Posts: 632
|
Re: What did you do to your truck today!
Quote:
__________________
www.tomthetruck.blogspot.com <-- Aka build thread. |
|
05-07-2012, 12:19 AM | #3993 |
Truck and auto performance nut
Join Date: Feb 2007
Location: McKinney,Texas
Posts: 3,848
|
Re: What did you do to your truck today!
you need to buy my 200-4r parts! Let's see....Hughes aluminum pan, TCI servo kit, carb brackets/TV ...
__________________
Kurt - '68 GMC short step - NIB '09 LY6 6.0L crate motor w/mods, NIB '12 crate 4L85e w/billet 3k stall Circle D, 3.73 posi 12 bolt, DynaTech f-swap headers, 3/4 drop, handling mods, etc. - my toy '72 Chevy LWB C-10 Highlander - 350/350 ps/pb/tilt/ac - not original but close '06 Chevy TrailBlazerSS - LS2/4L70e - little black hot rod SUV - my DD '18 Kia Sorento - wife's econo-driver '95 Chevy S10 - reg cab shortbed, LS, 4.3, auto... my '68's powertrain and chassis build -links broken A surprise phase - carb to efi -links broken |
05-07-2012, 11:08 PM | #3994 |
Fun Stuff
Join Date: Jan 2010
Location: Sedro Woolley, WA
Posts: 400
|
Re: What did you do to your truck today!
I saw these on FB. Do you have more pics of what you are doing to the firewall?
__________________
Jay 68 C10(project) 88 Honda Accord(DD) 93 Chevy Astro EXT 2wd |
05-07-2012, 11:09 PM | #3995 |
67cheby
Join Date: Sep 2008
Location: siloam springs ar 72761
Posts: 17,890
|
Re: What did you do to your truck today!
Man that firewall looks great !
Posted via Mobile Device |
05-08-2012, 10:10 PM | #3996 |
Registered User
Join Date: Oct 2011
Location: Houston tx
Posts: 701
|
Re: What did you do to your truck today!
Nothing today to my 68 but slapped wheels and tires on my work truck Posted via Mobile Device |
05-08-2012, 10:25 PM | #3997 |
Registered User
Join Date: Mar 2010
Location: Pueblo West, CO
Posts: 944
|
Re: What did you do to your truck today!
Bought a new tach conversion kit from Classic Industries.
__________________
67 C10 Stepside 66 Mustang Coupe 99 Burb 2500 |
05-08-2012, 10:28 PM | #3998 |
Registered User
Join Date: Nov 2009
Location: Hazlehurst, Ga.
Posts: 822
|
Re: What did you do to your truck today!
Paint on motor and ordered new cam from summit!
__________________
1972 Custom Deluxe LT1 Gen V Swap "Green Lantern" 1984 Silverado Red Baron-72 c10 Project |
05-08-2012, 11:21 PM | #3999 |
Senior Member
Join Date: Apr 2010
Location: St.Peters, MO
Posts: 2,228
|
Re: What did you do to your truck today!
Stripped the dash to cut the center section out tomorrow and replace it with one that hasn't been butchered
|
05-09-2012, 01:36 AM | #4000 |
Old member
Join Date: Jan 2002
Location: Liberty, & Garden City S.C. , U.S.
Posts: 19,945
|
Re: What did you do to your truck today!
Yea but now the whole dash has been cut!
__________________
1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. |
Bookmarks |
|
|