![]() |
|
![]() |
#1 |
Registered User
Join Date: Jul 2010
Location: Curtice,OH
Posts: 81
|
Re: What did you do to your truck today!
Got painted and installed the door panels. Cleaned and painted the trans.
__________________
A USED TRUCK IS A LOVED TRUCK! |
![]() |
![]() |
#2 |
RAT1968 '68 Cab/'71 Parts
Join Date: Feb 2002
Location: Coarsegold, CA
Posts: 2,375
|
Re: What did you do to your truck today!
After the eight freeze plug install, the motor's back in. After the leakage at all ports was diagnosed and (knock on wood) plugged professionally
![]() the trans is back in. Driveline is all hooked up. All the stuff is hooked back up to the trans. All the throttle linkage, kick down, and enough of the electrical is in to start 'er up. Fluids (the bane of my recent existence) are back in and she fired right up. Dry as a bone...... A hard, hot day. A good day.
__________________
M17 Coarsegold, CA RAT's shiny now. But always a rat. |
![]() |
![]() |
#3 | |
"brand new second-hand"
Join Date: Feb 2007
Location: White House, Tennessee
Posts: 526
|
Re: What did you do to your truck today!
Quote:
__________________
Steve 69 3/4t custom camper tilt,am/fm,speed warning,air gauge,buddy buckets,aux battery, big block,p/s,p/b,a/c 67 Camaro 96 Impala ss-sold 04 hybrid Honda-saving gas for the blue truck!:b69: |
|
![]() |
![]() |
#4 | |
RAT1968 '68 Cab/'71 Parts
Join Date: Feb 2002
Location: Coarsegold, CA
Posts: 2,375
|
Re: What did you do to your truck today!
Quote:
Seems like a really long time coming. I appreciate the "nod".
__________________
M17 Coarsegold, CA RAT's shiny now. But always a rat. |
|
![]() |
![]() |
#5 |
Registered User
![]() Join Date: Jan 2012
Location: Texas City, TX
Posts: 115
|
Re: What did you do to your truck today!
I finally had a little free time to mess with the truck today. I mounted my e-fans to the shroud, the shroud to the radiator, and dropped it in the truck for mock-up. I was able to get the replacement stepside fenders sanded and ready for paint/install too but I'm waiting until the '66 style tail lights with brackets come in tomorrow to do it all at once. I think next will be the steering column. I really need to blast those radiator brackets and repaint. I have so many new parts sitting around just waiting to be put in. Just not enough time!
![]() ![]() ![]() ![]()
__________________
'71 Short Stepper - One piece at a time! |
![]() |
![]() |
#6 |
Registered User
Join Date: Nov 2000
Location: Manhatan,KS USA
Posts: 51
|
Re: What did you do to your truck today!
Pulled it out of my garage and polished the new rims I got last week. Other than that It has been to hot to do anything.
A question for you all. If you choke a smurf what color will he turn, and how do they get the deer to cross at the deer crossing signs and what is a PED. I see PED crossings all the time and have never seen one. Has anyone seen a PED. Something to think about. |
![]() |
![]() |
#7 |
Registered User
Join Date: Jan 2011
Location: East Peoria, Illinois
Posts: 72
|
Re: What did you do to your truck today!
reinstalled the rebuilt Holley, fired it up, ran ruff, pulled the plugs they were trashed, did a compression check, everything great there, put some new plugs in again, fired it up, much better, dialed in the carb and its running much better now. Dad pulled the drivers side rear control arm that was completely rotten and swapped in a very nice used one i found. he also got the urethane bushing installed in the arm and track bar. he even got the passenger side arm removed and down to the blaster for a quick cleanup. it was 100 deg here again today and i must say the old man was gettin after it!
|
![]() |
![]() |
#8 |
Registered User
Join Date: Feb 2010
Location: Walnut Grove, Ca
Posts: 216
|
Re: What did you do to your truck today!
Grinded some welds, wasn't as hot as yesterday, but eeven in the 90's it kinda drains ya. :{
__________________
66 Gmc 1 ton. Long Step 351e V6 69 1/2 CHEVROLET (now a shortbed) LONGBED! ![]() ![]() 61 Shortbed Fleetside 1/2 ton.. in progress Next a 50-53! MY BUILD THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=447926 |
![]() |
![]() |
#9 |
Registered User
Join Date: Jul 2007
Location: Toppenish, WA
Posts: 15,503
|
Re: What did you do to your truck today!
I actually worked on it. New front brake pads, packed the wheels and replaced the passenger side upper control arm shaft and ball joint. Now everything in the front end and steering is new except the lower control arm shafts and right inner tie rod end.
|
![]() |
![]() |
#10 |
Registered User
Join Date: Jul 2012
Location: murfreesboro, tn.
Posts: 9
|
Re: What did you do to your truck today!
drove it to work and prayed it didnt run out of gas or break down. and started on trying ro straighten out the wiring
__________________
1971 chevy long bed c20 i6 4 in the floor dont use the fist one tho ![]() |
![]() |
![]() |
#11 |
Registered User
Join Date: Dec 2006
Location: Rolla, MO
Posts: 2,463
|
Re: What did you do to your truck today!
I replaced all three u-joints and the carrier bearing. Got a question though, while pressing in one side of the u joint I broke the outer ring on the yoke. The ring I'm talking about is where the retainer clip fits into. How long can I expect the u-joint cap to stay in without the retainer clip?
__________________
-Scott- |
![]() |
![]() |
#12 |
Registered User
Join Date: Jul 2002
Location: St. James, MO
Posts: 1,239
|
Re: What did you do to your truck today!
(Yesterday, actually.) I had my older son wash the truck, and I waxed it after supper. No pics yet.
__________________
'69 Longstep K-10: 327/SM465/T-221/Closed Knuckle Dana44/12-bolt. |
![]() |
![]() |
#13 |
Just a car guy
Join Date: Feb 2006
Location: New Washington, IN
Posts: 991
|
Re: What did you do to your truck today!
Started trimming ther cross brace on my bed to clear the new blazer tank. Also skim coated some filler of the welds of my old gas filler, filler panel.
Thats about all I got done yesterday, 111 with the humidity kept me in most of the day. When I get home today, I'll finish cutting the brace, and install the LMC headlight wiring harness that the UPS man should be dropping off.
__________________
1955 belair Blown Pro Street cruiser 1971 Camaro Pro Touring 1973 Vega Drag Car 1970 C20 tow rig |
![]() |
![]() |
#14 |
Registered User
Join Date: Apr 2011
Location: bowling green, ky
Posts: 439
|
Re: What did you do to your truck today!
Just got chrome console trim in today..
![]() Has on flaws but it was done cheap... ![]() Posted via Mobile Device |
![]() |
![]() |
#15 |
Registered User
Join Date: Jun 2009
Location: Claymont DE
Posts: 225
|
Re: What did you do to your truck today!
I took my trailing arm crossmember out it took me three hours but the mother bleeper is out. Only having a drill sawzall crowbar and hammer made it interesting.
Posted via Mobile Device |
![]() |
![]() |
#16 |
Just a car guy
Join Date: Feb 2006
Location: New Washington, IN
Posts: 991
|
Re: What did you do to your truck today!
Installled lmc heavy duty headlight harness.
Seems to have made a major improvement over stock. Waiting on ddmtuning hid kit for even better light. Talked to carb guy, he's gonna do some adjusting to better match my engine. getting so close ![]() Posted via Mobile Device
__________________
1955 belair Blown Pro Street cruiser 1971 Camaro Pro Touring 1973 Vega Drag Car 1970 C20 tow rig |
![]() |
![]() |
#17 |
Registered User
Join Date: Jan 2011
Location: East Peoria, Illinois
Posts: 72
|
Re: What did you do to your truck today!
got the other rear trailing arm mounted up, new rear shocks on, and got the emergency brake cables hooked up and working today.
|
![]() |
![]() |
#18 |
Registered User
Join Date: Nov 2008
Location: Petersville KY
Posts: 673
|
Re: What did you do to your truck today!
Kinda of a catch up on the last couple weeks on my 72. I pulled the blown 307 out of it last week and started cleaning up the frame and decided to add power steering since I had all the parts laying around. Today I started replacing the hardlines to the front brakes that I couldn't get to easily before, that and the drivers side one had rusted through. I then pulled the door on the drivers side and drilled and cut out the old rusty rocker and mocked it up with the new one and clamps to check fitment. Got started welding in the inner rocker, but heat and a storm moving in kinda stopped me. I've got to cut out the rusted floor and need to order my cab supports and cab corners and most of the drivers floor board.
![]() ![]() ![]()
__________________
Rob 72 C/10 (under reconstruction)(destruction ? LOL) 48 Willys CJ2A 1952 Super "A" Farmall (Grandfather's) |
![]() |
![]() |
#19 |
Registered User
Join Date: Sep 2011
Location: Neodesha, Kansas
Posts: 151
|
Re: What did you do to your truck today!
Got my new kick panels w/o speakers. Ill be puttin in some ks Kickers.
|
![]() |
![]() |
#20 |
Registered User
Join Date: Jan 2011
Location: East Peoria, Illinois
Posts: 72
|
Re: What did you do to your truck today!
installed new front and rear u-joints and then installed the driveshaft!
|
![]() |
![]() |
#21 |
Grand PooBaa Member
Join Date: Jan 2001
Location: LA, CA
Posts: 5,302
|
Re: What did you do to your truck today!
Picked up a new project today. Will start a build thread once I figure out a name.
|
![]() |
![]() |
#22 |
Registered User
Join Date: Dec 2011
Location: Creighton Sask. Canada
Posts: 4,121
|
Re: What did you do to your truck today!
So Project slant nose is lookin pretty cool, like the step side, going to be a cool project, I can just tell.
![]() |
![]() |
![]() |
#23 |
Registered User
Join Date: Nov 2009
Location: Rudyard, Michigan
Posts: 125
|
Re: What did you do to your truck today!
I spent $5 on black Gorrilla tape. I put the tape in the lower trim all the way around the truck (with a little trimming). It looks worlds better than the heavily faded woodgrain that was in the trim.
This is my temporary fix until I finally save enough money to have the truck repainted and get new trim. |
![]() |
![]() |
#24 |
Grand PooBaa Member
Join Date: Jan 2001
Location: LA, CA
Posts: 5,302
|
Re: What did you do to your truck today!
|
![]() |
![]() |
#25 |
Registered User
Join Date: Nov 2011
Location: Sheffield, ALA
Posts: 2,471
|
Re: What did you do to your truck today!
shawno, if I was closer I would try and talk you out of the 6.not many are leaving them in these days.
cleaning the 72 for the cruise in tonight. Coming home from a show last week,I run into a gully washer and got her filthy. Have a good day everyone. |
![]() |
![]() |
Bookmarks |
|
|