D52 Caliper Rear Disc Brake Brackets - Page 17 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ol_skool_chevy · 05-13-2016, 10:24 AM

Can you PM me a price for your black powder coated rear kit for my 1966 1/2 ton truck.
I don't have paypal i can mail you a money order or cashiers check. I will send it as soon as i get your PM.
I already have your P.O. address

**Captainfab** · 05-13-2016, 11:20 PM

The price is exactly the same as in post #1 of this for sale thread. I will send you a PM.

Quote:

Originally Posted by ol_skool_chevy

Can you PM me a price for your black powder coated rear kit for my 1966 1/2 ton truck.
I don't have paypal i can mail you a money order or cashiers check. I will send it as soon as i get your PM.
I already have your P.O. address

akdg87 · 05-18-2016, 01:28 AM

Captainfab: I've got the d52 kit on my 72 c10. My issue is the outer brake pads are dragging the circumference of the rotor on the horizontal surface (hub?? Between the rotor face and the wheel.). Is there a certain set of brake pads you reccomend? Or did I install something wrong?
Posted via Mobile Device

**Captainfab** · 05-18-2016, 11:21 PM

How long ago did you purchase the D52 brackets? That issue arose quite some time ago, but I made a change to the caliper bracket to correct that.

Quote:

Originally Posted by akdg87

Captainfab: I've got the d52 kit on my 72 c10. My issue is the outer brake pads are dragging the circumference of the rotor on the horizontal surface (hub?? Between the rotor face and the wheel.). Is there a certain set of brake pads you reccomend? Or did I install something wrong?
Posted via Mobile Device

akdg87 · 05-19-2016, 12:03 AM

Quote:

Originally Posted by Captainfab

How long ago did you purchase the D52 brackets? That issue arose quite some time ago, but I made a change to the caliper bracket to correct that.

Between December 2012 and March 2013.

steveo3318 · 05-20-2016, 04:01 PM

Payment sent for a set sir.

steveo3318 · 05-20-2016, 07:22 PM

I have made a fatal mistake on my truck and cannot use your rear brake kit. My truck is a standard with a borg warner R10 overdrive which means my truck freewheels even with the truck in reverse and off. In other words I HAVE TO HAVE an e brake or my truck roles away in gear. I highly apologize and understand if you take some of the refund out for your troubles and fees. Please let me know if a refund is an issue. Again this is my fault and a public apology!

**Captainfab** · 05-20-2016, 11:20 PM

You apparently did not read page 1 of this for sale thread where the e-brake style of calipers are talked about.

steveo3318 · 05-20-2016, 11:28 PM

Quote:

Originally Posted by Captainfab

You apparently did not read page 1 of this for sale thread where the e-brake style of calipers are talked about.

Yes I read that but i do not want to use the caddie brakes. I have already purchased the D52's and now have to send the rears back as well. I dont want the mismatched brakes. To be honest it was more about looks than function for me.

crakarjax · 05-21-2016, 12:15 AM

Quote:

Originally Posted by steveo3318

Yes I read that but i do not want to use the caddie brakes. I have already purchased the D52's and now have to send the rears back as well. I dont want the mismatched brakes. To be honest it was more about looks than function for me.

He sells brackets for Camaro calipers as well which have e-brake.

ol_skool_chevy · 06-01-2016, 12:20 AM

I just received mine . They really look nice. Thank you el capitan

gijoecarlos · 07-28-2016, 12:17 AM

Do you still sale these brakets?

**Captainfab** · 07-28-2016, 12:55 AM

I replied to your PM

Quote:

Originally Posted by gijoecarlos

Do you still sale these brakets?

**Captainfab** · 08-08-2016, 12:53 AM

I will be on vacation from 08-08-16 thru 08-25-16. If you wish to make a purchase you can post here in this for sale thread, send me a PM or an email to captainfab454@hotmail.com. I will reply to your inquiry when I return on the 25th. I do currently have a list of orders to build and ship when I return but I will add your name to the list in order of when received. Thanks for your understanding.

crakarjax · 11-17-2016, 10:53 PM

I'm using a Mopar MC since they are aluminum & plastic and make for a really clean & cheap install. They have 3/8" fittings and come in a wide range of bore sizes. You need to open up the mounting holes slightly but otherwise they bolt right onto the firewall.

Here are the part numbers I've gathered:
https://snag.gy/oDkjZ5.jpg

I am using a cheap ebay prop. valve inline with the rear circuit.

Sinisterv10 · 11-18-2016, 12:01 AM

Thanks crakarjax, i'll check into those. That's some good info you got there on the MC's.

**Captainfab** · 11-18-2016, 02:06 AM

I would just use a '77-'82 Corvette master and the prop valve for that application and/or an adjustable valve in the rear line. If you want an aluminum and plastic master, the '83+ Corvette, '85+ F-body's, '85+ Eldorado's, '94-'96 Impala SS. Caprice 9C1's as well as C/K1500 trucks in the 90's with 4 wheel disc will work.

akdg87 · 11-22-2016, 05:05 PM

will these work with a 15" wheel? i currently have them on my pickup but want to step down to a smaller rim.

**Captainfab** · 11-23-2016, 01:30 AM

Yes, 15" wheels will work as long as they are disc brake compatible wheels.

elf w/capital T · 12-05-2016, 10:49 AM

You selling axle flanges by them selves? I need a 1/4 inch thick for Myou different swap...pm sent

Cj Davidson · 12-05-2016, 06:18 PM

I need a set of bracket for my 1968 GMC. How much for the ones you sell for the Camaro calipers? What rotor will I need to purchase?
Thanks CJ

**Captainfab** · 12-06-2016, 01:16 AM

I replied to your post in the Camaro Caliper Bracket for sale thread.

Quote:

Originally Posted by Cj Davidson

I need a set of bracket for my 1968 GMC. How much for the ones you sell for the Camaro calipers? What rotor will I need to purchase?
Thanks CJ

**c10-72 II** · 01-07-2017, 11:27 PM

What about brackets for a six lug 12 bolt? I saw that you discontinuing the six brackets to make a better set in another thread. thanks

**Captainfab** · 01-08-2017, 12:32 AM

I have these:

http://www.67-72chevytrucks.com/vboa...d.php?t=494411

and these:

http://www.67-72chevytrucks.com/vboa...d.php?t=637489

Quote:

Originally Posted by c10-72 II

What about brackets for a six lug 12 bolt? I saw that you discontinuing the six brackets to make a better set in another thread. thanks

68Stepbed · 02-01-2017, 12:18 PM

I received my stuff today! Thank you, sir!

05-20-2016, 04:01 PM	#6
steveo3318 Registered User Join Date: Apr 2014 Location: Sumrall, MS Posts: 381	Re: D52 Caliper Rear Disc Brake Brackets Payment sent for a set sir. __________________ 1967 c10 3OTT with R10 overdrive. 385 Stroker, 373 posi FITECH EFI, Vintage air, York 210 OBA, 4/6 drop with riddler 20x8 and 20x10 1957 S5T Leslie Supertyfon train horns and EMD bell "No bolt left unturned"

05-20-2016, 07:22 PM	#7
steveo3318 Registered User Join Date: Apr 2014 Location: Sumrall, MS Posts: 381	Re: D52 Caliper Rear Disc Brake Brackets I have made a fatal mistake on my truck and cannot use your rear brake kit. My truck is a standard with a borg warner R10 overdrive which means my truck freewheels even with the truck in reverse and off. In other words I HAVE TO HAVE an e brake or my truck roles away in gear. I highly apologize and understand if you take some of the refund out for your troubles and fees. Please let me know if a refund is an issue. Again this is my fault and a public apology! __________________ 1967 c10 3OTT with R10 overdrive. 385 Stroker, 373 posi FITECH EFI, Vintage air, York 210 OBA, 4/6 drop with riddler 20x8 and 20x10 1957 S5T Leslie Supertyfon train horns and EMD bell "No bolt left unturned"

05-20-2016, 11:20 PM	#8
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,250	Re: D52 Caliper Rear Disc Brake Brackets You apparently did not read page 1 of this for sale thread where the e-brake style of calipers are talked about. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

06-01-2016, 12:20 AM	#11
ol_skool_chevy Registered User Join Date: May 2010 Location: Hillsboro, Oregon 97123 Posts: 1,300	Re: D52 Caliper Rear Disc Brake Brackets I just received mine . They really look nice. Thank you el capitan __________________ Measure with a yard stick Mark with Chalk Cut with a torch Built it yourself, don't count on others to to do it for you or with you. It will never get done

07-28-2016, 12:17 AM	#12
gijoecarlos Registered User Join Date: Jul 2014 Location: Salinas Ca. Posts: 45	Re: D52 Caliper Rear Disc Brake Brackets Do you still sale these brakets?

05-13-2016, 10:24 AM	#1
ol_skool_chevy Registered User Join Date: May 2010 Location: Hillsboro, Oregon 97123 Posts: 1,300	Re: D52 Caliper Rear Disc Brake Brackets Can you PM me a price for your black powder coated rear kit for my 1966 1/2 ton truck. I don't have paypal i can mail you a money order or cashiers check. I will send it as soon as i get your PM. I already have your P.O. address __________________ Measure with a yard stick Mark with Chalk Cut with a torch Built it yourself, don't count on others to to do it for you or with you. It will never get done

05-18-2016, 01:28 AM	#3
akdg87 Registered User Join Date: Sep 2013 Location: fairbanks, ak Posts: 339	Captainfab: I've got the d52 kit on my 72 c10. My issue is the outer brake pads are dragging the circumference of the rotor on the horizontal surface (hub?? Between the rotor face and the wheel.). Is there a certain set of brake pads you reccomend? Or did I install something wrong? Posted via Mobile Device

08-08-2016, 12:53 AM	#14
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,250	Re: D52 Caliper Rear Disc Brake Brackets I will be on vacation from 08-08-16 thru 08-25-16. If you wish to make a purchase you can post here in this for sale thread, send me a PM or an email to captainfab454@hotmail.com. I will reply to your inquiry when I return on the 25th. I do currently have a list of orders to build and ship when I return but I will add your name to the list in order of when received. Thanks for your understanding. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

11-17-2016, 10:53 PM	#15
crakarjax Registered User Join Date: Dec 2009 Location: Kirkland, WA Posts: 1,302	Re: D52 Caliper Rear Disc Brake Brackets I'm using a Mopar MC since they are aluminum & plastic and make for a really clean & cheap install. They have 3/8" fittings and come in a wide range of bore sizes. You need to open up the mounting holes slightly but otherwise they bolt right onto the firewall. Here are the part numbers I've gathered: https://snag.gy/oDkjZ5.jpg I am using a cheap ebay prop. valve inline with the rear circuit. __________________ 1968 LWB C20 / AC / Wood Bed

11-18-2016, 12:01 AM	#16
Sinisterv10 Registered User Join Date: Nov 2016 Location: El Paso, TX Posts: 10	Re: D52 Caliper Rear Disc Brake Brackets Thanks crakarjax, i'll check into those. That's some good info you got there on the MC's.

11-18-2016, 02:06 AM	#17
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,250	Re: D52 Caliper Rear Disc Brake Brackets I would just use a '77-'82 Corvette master and the prop valve for that application and/or an adjustable valve in the rear line. If you want an aluminum and plastic master, the '83+ Corvette, '85+ F-body's, '85+ Eldorado's, '94-'96 Impala SS. Caprice 9C1's as well as C/K1500 trucks in the 90's with 4 wheel disc will work. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

11-22-2016, 05:05 PM	#18
akdg87 Registered User Join Date: Sep 2013 Location: fairbanks, ak Posts: 339	Re: D52 Caliper Rear Disc Brake Brackets will these work with a 15" wheel? i currently have them on my pickup but want to step down to a smaller rim. __________________ build thread 1955 cameo turbo lsx 1993 K1500 Blazer 5.3/4L80e 2009 CTSV Sedan

11-23-2016, 01:30 AM	#19
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,250	Re: D52 Caliper Rear Disc Brake Brackets Yes, 15" wheels will work as long as they are disc brake compatible wheels. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

12-05-2016, 10:49 AM	#20
elf w/capital T Registered User Join Date: Feb 2011 Location: North Carolina Posts: 994	Re: D52 Caliper Rear Disc Brake Brackets You selling axle flanges by them selves? I need a 1/4 inch thick for Myou different swap...pm sent

12-05-2016, 06:18 PM	#21
Cj Davidson Registered User Join Date: Dec 2016 Location: Sheridan arkansas Posts: 3	Re: D52 Caliper Rear Disc Brake Brackets I need a set of bracket for my 1968 GMC. How much for the ones you sell for the Camaro calipers? What rotor will I need to purchase? Thanks CJ



Register or Log In To remove these advertisements.

01-07-2017, 11:27 PM	#23
c10-72 II Active Member Join Date: Sep 2013 Location: Elk Grove Village IL Posts: 152	Re: D52 Caliper Rear Disc Brake Brackets What about brackets for a six lug 12 bolt? I saw that you discontinuing the six brackets to make a better set in another thread. thanks __________________ 1972 GMC C2500 Tow Rig project 1972 C10 Air Bag project 1967 C10 Drag Truck project 1967 GMC Patina Special project 1968 C10 I have no clue what to do with project 1969 GMC C6500 I wish I had more money project 1986 K10 I have too many damn projects

02-01-2017, 12:18 PM	#25
68Stepbed Registered User Join Date: Mar 2005 Location: 10-Uh-See Posts: 5,609	Re: D52 Caliper Rear Disc Brake Brackets I received my stuff today! Thank you, sir! Attached Images __________________ Matt 68 C10 stepside, LS1/700R4, TCI Engineering suspension system

Register or Log In To remove these advertisements.