|
08-16-2011, 10:22 PM | #1 |
Registered User
Join Date: Mar 2002
Location: Forney TX
Posts: 4,512
|
Re: MY build thread...
Heres a few pics
I ditched the stock tailgate(RUSTY) for some 2x2 16ga tubing and made a frame to support the outter skin I kept or recycled. Along with my new paint gun and the 57 belair side job is wetsanded ready for final wash and sealer..
__________________
Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274 |
08-16-2011, 10:28 PM | #2 |
Registered User
Join Date: Mar 2002
Location: Forney TX
Posts: 4,512
|
Re: MY build thread...
And put my back window in. The tailgate looks heavy but suprisingly its lighter than the tailgate was and since everything will be smoothed in,still need sheet metal for the inside, the top edge of the tail and the side rails are almost the same width so I have just at 2" in on the rear stake pockets from side to corner and tailgate to corner of the rear pockets so it just adds to the look of being alittle different. And if somebody ever hits the back of this thing...GOD forbid, they are going to know it...
__________________
Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274 |
08-17-2011, 03:11 AM | #3 |
Registered User
Join Date: Mar 2010
Location: manhattan KS
Posts: 87
|
Re: MY build thread...
An hopefully this week get the compressor/switches wired up.Just gotta find some 10 or 8 gauge to run to the relay.An figgures i cant find any power wire cheap for it,that i thought i had.GRrrrr
|
08-18-2011, 08:46 PM | #4 |
But Found Her 25yrs Later!
Join Date: Oct 2010
Location: Oregon City, Oregon
Posts: 10,525
|
Re: MY build thread...
--- Note to self ---
Left off at post #226. There's a lot of content in this thread. Posted via Mobile Device
__________________
I lost my 65 - Found it 25 years later: http://67-72chevytrucks.com/vboard/s...d.php?t=426650 66 C20 Service Truck: http://67-72chevytrucks.com/vboard/s...d.php?t=428035 |
08-18-2011, 09:04 PM | #5 | |
Registered User
Join Date: Mar 2002
Location: Forney TX
Posts: 4,512
|
Re: MY build thread...
Quote:
Posted via Mobile Device
__________________
Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274 |
|
09-01-2011, 05:54 PM | #6 |
Registered User
Join Date: Mar 2011
Location: tulsa,ok.
Posts: 1,803
|
Re: MY build thread...
any updates?? got it wired up yet and driving?? that shows next weekend!!
|
09-02-2011, 10:21 PM | #7 |
Registered User
Join Date: Mar 2002
Location: Forney TX
Posts: 4,512
|
Re: MY build thread...
Well Im still chipping away at these little things...Got the new tranny xmember done,new turn signal cam and wiring installed,airride minus two fittings is done,alternator is installed BUT ran out of materials to finish the bed but more coming....Also been working on my buddies 57 chevy. Did my first candy let down panel on an old door for him today and man candy is alot of work!!! PICS...............>
__________________
Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274 |
09-02-2011, 10:23 PM | #8 |
Registered User
Join Date: Mar 2002
Location: Forney TX
Posts: 4,512
|
Re: MY build thread...
More.... Second pic is copper basecoat 2 coats/1 coat of candy cinnimon
Third is two, three and four coats of candy Fourth is 5 and 6 coats and cleared then last pic is a different angle.. With flash time this took forever...
__________________
Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274 |
09-05-2011, 08:41 PM | #9 |
Registered User
Join Date: Mar 2002
Location: Forney TX
Posts: 4,512
|
Re: MY build thread...
I HATE WIRING!!! 6 hours of hell and still not done. Note to self those universal hotrod wiring kits are a pita to wire to 50 year old electronics. I hope everything works when done. Air ride works also had to make some reducers to slow down the front. Aftermarket guages would've been easier also...
Posted via Mobile Device
__________________
Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274 |
09-06-2011, 07:38 PM | #10 |
Registered User
Join Date: Mar 2002
Location: Forney TX
Posts: 4,512
|
Re: MY build thread...
Well buying more parts!!! Headlight switch,door bumpers,hood latch and find somebody to install windshield....
Posted via Mobile Device
__________________
Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274 |
09-08-2011, 09:01 PM | #11 |
Registered User
Join Date: Mar 2011
Location: tulsa,ok.
Posts: 1,803
|
Re: MY build thread...
lol, damn monkey wrenches!! mine aint getting done til next year either!!
|
09-08-2011, 09:06 PM | #12 |
1 thing at a time is progress.
Join Date: Jun 2007
Location: Ball Ground GA
Posts: 5,511
|
Re: MY build thread...
Post when you can. We will be waiting. No pressure.
__________________
Alan
Philippians 2:14-16 |
09-08-2011, 09:39 PM | #13 | |
Registered User
Join Date: Mar 2002
Location: Forney TX
Posts: 4,512
|
Re: MY build thread...
Quote:
Thanks Alan, did you ever feel during your build that no matter much you got done there was always something you forgot about yet to do. I've made like three lists and all they do is grow even though I keep checking things off as done they keep getting longer!!!!! I will post when I get done fighting with mud dust and primer!!! Thanks guys... Posted via Mobile Device
__________________
Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274 |
|
09-11-2011, 10:30 PM | #14 |
Registered User
Join Date: Mar 2002
Location: Forney TX
Posts: 4,512
|
Re: MY build thread...
9-11 update
__________________
Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274 |
09-16-2011, 06:43 PM | #15 |
Registered User
Join Date: Mar 2002
Location: Forney TX
Posts: 4,512
|
Re: MY build thread...
Well it runs and drives but.... Didn't have time to finish the dash wiring and install the windshield! They are calling for rain this weekend so I think without side windows it's probably best it stays home instead of going to ol marries show.... I got the first round of blocking on the tailgate done just have a few more spots to fix. I'll post pics alittle later.
Posted via Mobile Device
__________________
Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274 |
09-17-2011, 01:33 AM | #16 |
Registered User
Join Date: Mar 2002
Location: Forney TX
Posts: 4,512
|
Re: MY build thread...
Heres the pics. Pulled it outside cleaned the tap roots out from under it and spun it around and backed it back in the shop. Runs good but the gas is old and the motor wasnt caring for it too much. Bed needs more work but here it is after first blocking. Got a new headlight switch in and now I need the dang knob for it...
__________________
Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274 |
09-17-2011, 02:55 PM | #17 |
Registered User
Join Date: Apr 2011
Location: Sulphur, OK
Posts: 316
|
Re: MY build thread...
Truck is looking nice I think from all I've read it's best to not put time limits on yourself. Once you do the stress goes up and the fun factor goes down. It'll be done before you know it! Keep it up!
Posted via Mobile Device
__________________
1966 C10 LWB, 283, 3 on the tree (lots of work to do!) http://67-72chevytrucks.com/vboard/s...d.php?t=471348 2001 Suburban daily driver 2008 HHR (wife's ride) |
09-17-2011, 03:04 PM | #18 | |
Registered User
Join Date: Mar 2002
Location: Forney TX
Posts: 4,512
|
Re: MY build thread...
Quote:
Posted via Mobile Device
__________________
Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274 |
|
09-22-2011, 09:34 PM | #19 |
Registered User
Join Date: Jan 2010
Location: Forsyth, Ga
Posts: 1,012
|
Re: MY build thread...
Do you have some pictures of the finished exhaust? What was the OD of the pipe through the frame to get the exhaust outside the framerails?
|
09-22-2011, 09:49 PM | #20 |
Registered User
Join Date: Mar 2002
Location: Forney TX
Posts: 4,512
|
Re: MY build thread...
I don't have any exhaust on it now but when I do get it done I'm going 2.5" into the mufflers under the cab then Step up to 3" possible H pipe then outside of the frame to in front of the tires. The tube going through the frame is 5" I think cut 1" thick on a 45* angle welded inside and out. My truck will not haul more than a few chairs and a cooler. For a dd I would make it the same thickness of the top ofthe frame and box the area in but I'm not too worried about it. Thanks for checking out the build. Keep track I might be getting exhaust in a few weeks.....
Posted via Mobile Device
__________________
Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274 |
09-25-2011, 06:32 PM | #21 |
Registered User
Join Date: Mar 2002
Location: Forney TX
Posts: 4,512
|
Re: MY build thread...
Well work hasnt been done on the truck because of putting in hours on my friends 57 chevy. Got it all jammed out and looking good. New anesta iwatta ls400 is BAD A.. Pics dont do it justice,first 2 are basecoat only then the last ones are 4 coats of candy then 2 coats of clear.
__________________
Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274 |
10-03-2011, 11:11 PM | #22 |
Registered User
Join Date: Mar 2002
Location: Forney TX
Posts: 4,512
|
Re: MY build thread...
Well finally finished my side job I was working on... Now back to the truck!
__________________
Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274 |
10-04-2011, 01:16 AM | #23 |
60-66 Nut
Join Date: Mar 2007
Location: Coeur d'Alene, Idaho
Posts: 23,248
|
Re: MY build thread...
Wow! that turned out very nice
__________________
Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE |
10-04-2011, 09:54 AM | #24 |
Registered User
Join Date: Apr 2011
Location: Sulphur, OK
Posts: 316
|
Re: MY build thread...
That's a slick looking paint job! Congrats What color is that anyway? Did I miss it somewhere?
__________________
1966 C10 LWB, 283, 3 on the tree (lots of work to do!) http://67-72chevytrucks.com/vboard/s...d.php?t=471348 2001 Suburban daily driver 2008 HHR (wife's ride) |
10-04-2011, 10:39 AM | #25 | |
Registered User
Join Date: Mar 2002
Location: Forney TX
Posts: 4,512
|
Re: MY build thread...
Quote:
Posted via Mobile Device
__________________
Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274 |
|
Bookmarks |
|
|