Project "Just an Old Truck" - Page 17 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Portmod7 · 01-31-2013, 08:09 PM

When I was doing the hoses for my truck, I noticed that KRC says to only use hose rated to 2,250psi, I didn't realize it had to be that high!

Went down to my local hydraulic shop and a buddy of mine fixed me up. He made up some crimped fittings and hose. It's not as perty as yours is going to be though!

C10_ustacould · 02-02-2013, 12:14 PM

Quote:

Originally Posted by Portmod7

When I was doing the hoses for my truck, I noticed that KRC says to only use hose rated to 2,250psi, I didn't realize it had to be that high!

I didn't realize that either, kind of surprised the old one lasted this long!

Well, I built up my new power steering pressure line and it appears to be doing just fine. To quote Johnny Bench, "No runs, no drips, no errors." I also picked up my rear end, with fresh install of Richmond 3.73 gears and an Eaton posi.

**Hart_Rod** · 02-02-2013, 12:25 PM

Quote:

Originally Posted by BucksSS

I didn't realize that either, kind of surprised the old one lasted this long!

Well, I built up my new power steering pressure line and it appears to be doing just fine. To quote Johnny Bench, "No runs, no drips, no errors." I also picked up my rear end, with fresh install of Richmond 3.73 gears and an Eaton posi.

Sweet!!!! Hurry up and get that installed. I need you to clear some calendar space so you can help me pull the "junky" motor out of my farm truck,

.

gdavis · 02-02-2013, 04:41 PM

Quote:

Originally Posted by BucksSS

I didn't realize that either, kind of surprised the old one lasted this long!

Well, I built up my new power steering pressure line and it appears to be doing just fine. To quote Johnny Bench, "No runs, no drips, no errors." I also picked up my rear end, with fresh install of Richmond 3.73 gears and an Eaton posi.

How do a person tell what gear they have in their truck. I have a 67 frame and the rear was a poss. But don't know how to tell the gears, it works great. I think I have found something here in all my swapping around with these trucks..

C10_ustacould · 02-02-2013, 05:44 PM

Quote:

Originally Posted by gdavis

How do a person tell what gear they have in their truck. I have a 67 frame and the rear was a poss. But don't know how to tell the gears, it works great. I think I have found something here in all my swapping around with these trucks..

Put the rear end on jack stands, put a chalk mark on the drive shaft and the tire. Spin the tire one revolution and count how many times the drive shaft turns using the chalk as a reference. This number is a rough estimate of what gear you have.

Rusbuilt · 02-03-2013, 12:39 AM

Nice!!!!

gdavis · 02-10-2013, 08:48 PM

I like your shorty step side. I also board here in Fl. on the west coast call nature coast. I am sure that you are going to make this truck a show stopper. I will be following your build.

sduckworth13 · 02-10-2013, 09:54 PM

Quote:

Originally Posted by BucksSS

Took my factory (Harrison) heater core to the radiator shop this morning, and they said I should order another new heater core, but from a different manufacturer. So, I will pick it up on my home from work and see if Carquest can do any better...

On a positive note here is a pic from a little cruise we took a few weeks ago...

Funny thing, I would rather have your truck than any of those other cars or trucks parked on that row of vehicles. Your truck looks great!

C10_ustacould · 02-10-2013, 10:40 PM

Quote:

Originally Posted by gdavis

I like your shorty step side. I also board here in Fl. on the west coast call nature coast. I am sure that you are going to make this truck a show stopper. I will be following your build.

I am going to do my best, I have a long list of things I'd like to do. Many of them are small details that most people won't normally notice or care to fix.

Stay tuned and I'll see if I can keep it interesting.

Quote:

Originally Posted by sduckworth13

Funny thing, I would rather have your truck than any of those other cars or trucks parked on that row of vehicles. Your truck looks great!

I agree. I often think about having a new camaro, but I wouldn't be happy. There are hundreds of them running around here, but just a few 67-72 C10s! Thanks for the compliment!

502ms · 02-10-2013, 11:02 PM

Beautiful....yes!
#teamstepside
Posted via Mobile Device

sourkraut · 02-10-2013, 11:35 PM

I agree but that grand national at the end would be a very close second for me. I love em both!

**Nobby** · 02-10-2013, 11:42 PM

Truck looks Great man...Is that a pic from P cola?

C10_ustacould · 02-10-2013, 11:58 PM

Quote:

Originally Posted by Nobby

Truck looks Great man...Is that a pic from P cola?

Thanks! Yep, in front of Surf Burger on Pensacola Beach.
Posted via Mobile Device

Rusbuilt · 02-11-2013, 08:50 AM

Quote:

Originally Posted by sourkraut

I agree but that grand national at the end would be a very close second for me. I love em both!

I have to agree with you on the grand national! those things are getting hard to find too.

ChillWinstonC20 · 02-11-2013, 01:36 PM

I'll have to third the comment. I have always had a thing for the GNs. But given the option between YOUR stepside and that GN I'd choose your stepper. Very sweet

1lo67 · 02-11-2013, 06:00 PM

Truck is looking Super Nice...

C10_ustacould · 02-11-2013, 09:20 PM

Quote:

Originally Posted by sourkraut

I agree but that grand national at the end would be a very close second for me. I love em both!

Quote:

Originally Posted by Rusbuilt

I have to agree with you on the grand national! those things are getting hard to find too.

Quote:

Originally Posted by ChillWinstonC20

I'll have to third the comment. I have always had a thing for the GNs. But given the option between YOUR stepside and that GN I'd choose your stepper. Very sweet

The guy that owns that GN has had it since new, it is in perfect condition. Very nice!

Quote:

Originally Posted by 1lo67

Truck is looking Super Nice...

Thanks!

C10_ustacould · 02-14-2013, 08:41 PM

I have the "waiting for a shipment from CPP" blues... I'd love to have my rear disc brake kit so I can install the new posi rear-end. Good news is, tomorrow is going to be a beautiful day to drive my truck to work!

jmedero · 02-14-2013, 10:32 PM

I found that when I need cpp stuff I get them from Scott's. he goes down there picks up the parts then ships them. I had my nova front and rear susp in 5 days!! I waited 5 weeks for my cpp drive shaft. Lol
Posted via Mobile Device

C10_ustacould · 02-16-2013, 12:37 AM

Quote:

Originally Posted by jmedero

I found that when I need cpp stuff I get them from Scott's. he goes down there picks up the parts then ships them. I had my nova front and rear susp in 5 days!! I waited 5 weeks for my cpp drive shaft. Lol
Posted via Mobile Device

I talked with him, but I felt like my small order was an inconvenience to him so I just ordered from Jeff Norton. Well, consequently this evening, two weeks after I placed my order, I received a shipping notice from UPS. The brakes will be here... Thursday!!

So... we wait. Oh and ride around in the farm truck.

C10_ustacould · 02-19-2013, 11:27 PM

Getting started on the rear end swap, I have my master technician helping me!

jmedero · 02-19-2013, 11:39 PM

Ase master tech.
Posted via Mobile Device

Bennett68C10 · 02-20-2013, 12:03 AM

it's good to have a helper every now and then
Posted via Mobile Device

Rusbuilt · 02-20-2013, 12:12 AM

Buck have I ever told you how much I love your truck?

C10_ustacould · 02-20-2013, 08:35 AM

Quote:

Originally Posted by Rusbuilt

Buck have I ever told you how much I love your truck?

Thanks!

01-31-2013, 08:09 PM	#401
Portmod7 Registered User Join Date: Dec 2004 Location: Aztec, NM Posts: 388	Re: Project "Just an Old Truck" When I was doing the hoses for my truck, I noticed that KRC says to only use hose rated to 2,250psi, I didn't realize it had to be that high! Went down to my local hydraulic shop and a buddy of mine fixed me up. He made up some crimped fittings and hose. It's not as perty as yours is going to be though! __________________ Super Blue - 1968 C-10 Short Stepside Fastburn 385, 4-Speed Sag. on the Column, Coleman 9" Floater w/Detroit TrueTrac

02-03-2013, 12:39 AM	#406
Rusbuilt Registered User Join Date: Mar 2012 Location: Knoxville, TN Posts: 5,381	Re: Project "Just an Old Truck" Nice!!!! __________________ -Rus PLEASE HELP WITH PROJECT UNDERHAULINPaypal donations accepted @ rus1785@yahoo.com Rusbuilt's garage 1968 Chevy C-30 Darcy SOLD Rusbuilt shop truck *SOLD*

02-10-2013, 08:48 PM	#407
gdavis Registered User Join Date: Aug 2012 Location: Homosassa, Fl. Posts: 2,965	Re: Project "Just an Old Truck" I like your shorty step side. I also board here in Fl. on the west coast call nature coast. I am sure that you are going to make this truck a show stopper. I will be following your build.

02-10-2013, 11:02 PM	#410
502ms Registered User Join Date: Aug 2011 Location: Atlanta, GA Posts: 1,523	Re: Project "Just an Old Truck" Beautiful....yes! #teamstepside Posted via Mobile Device __________________ Best Regards, Leon M. Instagram: @TheDirtyDianah Bagged \| 6.0L LS \| T-56 (6-Speed Manual) \| Turbo Burnout/Rolling Video: Chevy C10 Stepside 6.0L LSx & 6-Speed Manual

02-10-2013, 11:35 PM	#411
sourkraut Registered User Join Date: Sep 2008 Location: WI Posts: 1,243	Re: Project "Just an Old Truck" I agree but that grand national at the end would be a very close second for me. I love em both! __________________ "The way it is" truck build http://67-72chevytrucks.com/vboard/s...d.php?t=359200

02-10-2013, 11:42 PM	#412
Nobby Senior Member Join Date: Feb 2005 Location: St. Amant Louisiana Posts: 840	Re: Project "Just an Old Truck" Truck looks Great man...Is that a pic from P cola?

02-11-2013, 01:36 PM	#415
ChillWinstonC20 Registered User Join Date: Aug 2012 Location: Cbus, OH Posts: 48	Re: Project "Just an Old Truck" I'll have to third the comment. I have always had a thing for the GNs. But given the option between YOUR stepside and that GN I'd choose your stepper. Very sweet

02-11-2013, 06:00 PM	#416
1lo67 Registered User Join Date: May 2005 Location: Morristown, Tn Posts: 275	Re: Project "Just an Old Truck" Truck is looking Super Nice...

02-14-2013, 08:41 PM	#418
C10_ustacould A day late and $1 short... Join Date: Dec 2008 Location: Northwest FL Posts: 3,877	Re: Project "Just an Old Truck" I have the "waiting for a shipment from CPP" blues... I'd love to have my rear disc brake kit so I can install the new posi rear-end. Good news is, tomorrow is going to be a beautiful day to drive my truck to work! __________________ Buck Instagram: C10_ustacould 1963 SWB Fleet Side 528 Desert Beige Milly 1967 SWB Step Side 506 Medium Blue The Old Girl 1968 SWB Fleet Side 503 Light Green Ellie SOLD 1965 SWB Fleet Side 507 Light Blue Prescription Strength SOLD 1971 SWB Fleet Side 521 White Shiro SOLD 1968 SWB Step Side 503 Light Green My Old Farm Truck SOLD

02-14-2013, 10:32 PM	#419
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,073	Re: Project "Just an Old Truck" I found that when I need cpp stuff I get them from Scott's. he goes down there picks up the parts then ships them. I had my nova front and rear susp in 5 days!! I waited 5 weeks for my cpp drive shaft. Lol Posted via Mobile Device __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

02-19-2013, 11:27 PM	#421
C10_ustacould A day late and $1 short... Join Date: Dec 2008 Location: Northwest FL Posts: 3,877	Re: Project "Just an Old Truck" Getting started on the rear end swap, I have my master technician helping me! Attached Images __________________ Buck Instagram: C10_ustacould 1963 SWB Fleet Side 528 Desert Beige Milly 1967 SWB Step Side 506 Medium Blue The Old Girl 1968 SWB Fleet Side 503 Light Green Ellie SOLD 1965 SWB Fleet Side 507 Light Blue Prescription Strength SOLD 1971 SWB Fleet Side 521 White Shiro SOLD 1968 SWB Step Side 503 Light Green My Old Farm Truck SOLD

02-19-2013, 11:39 PM	#422
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,073	Re: Project "Just an Old Truck" Ase master tech. Posted via Mobile Device __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

02-20-2013, 12:03 AM	#423
Bennett68C10 Registered User Join Date: Dec 2006 Location: Toms River, NJ Posts: 5,518	Re: Project "Just an Old Truck" it's good to have a helper every now and then Posted via Mobile Device __________________ Keith 66 Suburban Burb Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=751361 IG: bennett68c10

02-20-2013, 12:12 AM	#424
Rusbuilt Registered User Join Date: Mar 2012 Location: Knoxville, TN Posts: 5,381	Re: Project "Just an Old Truck" Buck have I ever told you how much I love your truck? __________________ -Rus PLEASE HELP WITH PROJECT UNDERHAULINPaypal donations accepted @ rus1785@yahoo.com Rusbuilt's garage 1968 Chevy C-30 Darcy SOLD Rusbuilt shop truck *SOLD*



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.