What did you do to your truck today.The 3rd chapter - Page 17 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Metaldoc · 04-15-2019, 12:45 AM

Quote:

Originally Posted by NoStopN

I'm afraid we're going to need more than just "the small blue unit".

Even zooming in I can't read the brand name on it.

They're made for motorcycles, I got it off Amazon. The new ones have blue tooth built in, I use a small adapter.

Metaldoc · 04-15-2019, 12:51 AM

Working on installing some new front speakers, made a new bracket and think about what I did with the old speaker screw. It pays to be organized, it was blasted, painted and stowed in the bag marked dash.

**RodnRudy** · 04-17-2019, 06:42 PM

I made some progress buttoning up the rebuilt engine for Old Red. All I have to do is put on the exhaust manifolds and it's ready to plunk down in the engine bay. I went ahead and primed the oil and set the distributor in on #1 so I won't have to crawl in the engine compartment to do that.

Linkman440 · 04-14-2019, 09:18 PM

Finally got my grille guard installed

rjs53 · 04-14-2019, 09:23 PM

Finished the door seals and window felts, put door panels on and got the dash painted and put back together. Next week windshield and alignment.

Blue18 · 04-18-2019, 05:09 AM

3 inch lowering spring and 2 inch block in the rear. New bilstein shocks and adjustable panhard bar!!!

OregonNed · 04-18-2019, 11:05 AM

I did some web research and ordered new inner door panels that will be arriving today. It was a bit of a wait for them to be customized. Will post pictures when I get them in.

**Thrill4130** · 04-18-2019, 09:37 PM

I got my camper on and bolted up last night. I made some mounts for stake pockets. Needs a back door , insulation and couple other things but it’s on.
Posted via Mobile Device

**3757chevy** · 04-18-2019, 10:59 PM

Quote:

Originally Posted by Thrill4130

I got my camper on and bolted up last night. I made some mounts for stake pockets. Needs a back door , insulation and couple other things but it’s on.
Posted via Mobile Device

looking good, I like your pocket mounts.

**Canuckvetter** · 04-20-2019, 10:28 PM

I bored out 67 wiper knobs to 1/4" and added some aluminum tape to simulate deluxe knobs. Added the knobs to my under dash A/C unit. Fabbed up some brackets and installed the under dash unit.

http://67-72chevytrucks.com/vboard/a...1&d=1555813380

**zicc1835** · 04-21-2019, 08:58 AM

Quote:

Originally Posted by Thrill4130

I got my camper on and bolted up last night. I made some mounts for stake pockets. Needs a back door , insulation and couple other things but it’s on.
Posted via Mobile Device

very nice

Redneck Rydes · 04-21-2019, 06:59 PM

I put a 1 1/4 front sway bar on my truck today,also pulled my gas tank,had a annoying vibration when tank was full, must have had no deadner behind it,put some glued on deadner on the back of the cab,reinstalled tank,and good to go,brought in the 85 c10, gonna go over it and get ot ready for a safety check and put it on the road.

Metaldoc · 04-21-2019, 09:40 PM

Quote:

Originally Posted by Redneck Rydes

I put a 1 1/4 front sway bar on my truck today,also pulled my gas tank,had a annoying vibration when tank was full, must have had no deadner behind it,put some glued on deadner on the back of the cab,reinstalled tank,and good to go,brought in the 85 c10, gonna go over it and get ot ready for a safety check and put it on the road.

The vibration may be from pinion angle under the weight of a full tank. Ya may need shims in the mounts.

67_C-30 · 04-21-2019, 08:28 PM

Sanded and painted my 6” steelies for the front and waiting on the 8’s to get back from sandblasting to put my “new” ‘72 on steelies.

**71CHEVYSHORTBED402** · 04-25-2019, 11:54 PM

Swapped out a battery box is all. The bolts can be a real (^( without pulling the radiator. The box I wanted is solid. I don't see any pitting, but know better. Hopefully it suits my rebuild.

Pulled the RH skirt off the same truck recently. Fitted a few skirts on it, practice

I was hoping to use it for the rebuild as well. Nice fender, but too much rust in front. So I'm in the hunt for a RH fender. That or pair of replacements.

**Canuckvetter** · 04-26-2019, 02:28 AM

http://67-72chevytrucks.com/vboard/a...1&d=1556259847
Cleaned up 4 horn buttons. Disassembled. Polished out scratches starting with 220 grit wet sand worked up to 7000 grit.

**SoCoC10** · 04-26-2019, 07:55 PM

Finished my interior too

**70STOVEBOLT** · 04-26-2019, 09:48 PM

Mostly, neglected and drank some beer, but I did finish blasting the air cleaner, shot the first coat of paint on it. Sorry, no pics, it’s at work.

**Steeveedee** · 04-26-2019, 11:05 PM

Quote:

Originally Posted by cruisinthe34

Almost finished the interior:

Nice!

Quote:

Originally Posted by SoCoC10

Finished my interior too

...and Nice!

Gotta get after my interior and dash. Interior is shot and I want to get more instrumentation than the stock gauge dash has.

Metaldoc · 04-27-2019, 12:16 AM

Mines all back as well.

**Ol Blue K20** · 04-27-2019, 07:55 PM

I like it a lot!! How's it run? I'm guessing good as it looks.....

**Thrill4130** · 04-27-2019, 11:33 PM

I tried getting my horn setup fixed. I was missing the pin. Also went to car show and saw this cool carryall.
Posted via Mobile Device

**RodnRudy** · 04-28-2019, 08:38 AM

Quote:

Originally Posted by Ol Blue K20

I like it a lot!! How's it run? I'm guessing good as it looks.....

It runs well so far. The ride is "firm" being lowered that much but I like it that way.

**SoCoC10** · 04-29-2019, 10:02 AM

First car show of the year.

**70STOVEBOLT** · 04-29-2019, 10:06 AM

Replaced timing chain (stretched).

04-15-2019, 12:51 AM	#2
Metaldoc Registered User Join Date: Apr 2015 Location: Ayr Ontario Posts: 1,122	Re: What did you do to your truck today.The 3rd chapter Working on installing some new front speakers, made a new bracket and think about what I did with the old speaker screw. It pays to be organized, it was blasted, painted and stowed in the bag marked dash. Attached Images __________________ Do it, Do it right, Do it right the first time

04-17-2019, 06:42 PM	#3
RodnRudy Senior Member Join Date: Oct 2014 Location: New Palestine In Posts: 931	Re: What did you do to your truck today.The 3rd chapter I made some progress buttoning up the rebuilt engine for Old Red. All I have to do is put on the exhaust manifolds and it's ready to plunk down in the engine bay. I went ahead and primed the oil and set the distributor in on #1 so I won't have to crawl in the engine compartment to do that. Attached Images __________________ Phil "Money is only a tool to create and achieve what you want most in life" PayPal: rodnrudy@comcast.net

04-14-2019, 09:18 PM	#4
Linkman440 Registered User Join Date: Mar 2017 Location: Waco, Texas Posts: 24	Re: What did you do to your truck today.The 3rd chapter Finally got my grille guard installed Attached Images

04-14-2019, 09:23 PM	#5
rjs53 Registered User Join Date: Jan 2010 Location: nevada Posts: 649	Re: What did you do to your truck today.The 3rd chapter Finished the door seals and window felts, put door panels on and got the dash painted and put back together. Next week windshield and alignment. __________________ 2003 Dodge 2500 1969 C10 2014 Camaro SS/RS/1LE

04-18-2019, 05:09 AM	#6
Blue18 Registered User Join Date: Apr 2016 Location: Stockton CA Posts: 74	Re: What did you do to your truck today.The 3rd chapter 3 inch lowering spring and 2 inch block in the rear. New bilstein shocks and adjustable panhard bar!!!

04-18-2019, 11:05 AM	#7
OregonNed Registered User Join Date: Dec 2012 Location: Vancouver, Washington Posts: 1,644	Re: What did you do to your truck today.The 3rd chapter I did some web research and ordered new inner door panels that will be arriving today. It was a bit of a wait for them to be customized. Will post pictures when I get them in. __________________ 1968 Chevrolet C/10 LWB - 327, TH350 - 4/5 Drop

04-18-2019, 09:37 PM	#8
Thrill4130 Active Member Join Date: Nov 2015 Location: Stallion Springs, CA Posts: 197	I got my camper on and bolted up last night. I made some mounts for stake pockets. Needs a back door , insulation and couple other things but it’s on. Posted via Mobile Device Attached Images

04-20-2019, 10:28 PM	#10
Canuckvetter How did I get this OLD! Join Date: Dec 2014 Location: Lamont County, AB, CANADA Posts: 1,047	Re: What did you do to your truck today.The 3rd chapter I bored out 67 wiper knobs to 1/4" and added some aluminum tape to simulate deluxe knobs. Added the knobs to my under dash A/C unit. Fabbed up some brackets and installed the under dash unit. http://67-72chevytrucks.com/vboard/a...1&d=1555813380 Attached Images __________________ 1967 Oshawa built LWB Fleetside. 327,3 OTT, 515 Vermilion, CST, PS, PB, Shoulder Harness, Tach,Vac, Speed Warning, Choke Delete, Manual Throttle, Fawn interior. Dealer installed A/C 04/2015, N34 Rosewood Wheel 06/2023 Members who I have met personally. Metaldoc, chevnkevin, 62 Longbed, 72LHorn, 72MARIO, YBNORML, TBONE1964, Classic Bowties, Chevemall, Dagnabbitt.

04-21-2019, 06:59 PM	#12
Redneck Rydes Registered User Join Date: Feb 2016 Location: Trenton,Ontario & South Carolina Posts: 755	Re: What did you do to your truck today.The 3rd chapter I put a 1 1/4 front sway bar on my truck today,also pulled my gas tank,had a annoying vibration when tank was full, must have had no deadner behind it,put some glued on deadner on the back of the cab,reinstalled tank,and good to go,brought in the 85 c10, gonna go over it and get ot ready for a safety check and put it on the road.

04-21-2019, 08:28 PM	#14
67_C-30 I have a radical idea! Join Date: Jan 2005 Location: Sweet Home Alabama! Posts: 6,513	Re: What did you do to your truck today.The 3rd chapter Sanded and painted my 6” steelies for the front and waiting on the 8’s to get back from sandblasting to put my “new” ‘72 on steelies. Attached Images __________________ '67 C-30 Dually Pickup 6.2 Turbo Diesel, NP435 ‘72 C-10 SWB , 350 4bbl, TH350 '69 C-10 SWB , 250 L6, 3 OTT '69 GMC C3500, dump truck, 351 V6, NP435 '84 M1009 CUCV Military Blazer 67 C-30 Turbodiesel build thread http://67-72chevytrucks.com/vboard/s...d.php?t=254096 My trucks http://s226.photobucket.com/albums/d...ediafilter=all Member of the 1-Ton Club!

04-25-2019, 11:54 PM	#15
71CHEVYSHORTBED402 Senior Member Join Date: Feb 2009 Location: Northern Nevada Posts: 7,295	Re: What did you do to your truck today.The 3rd chapter Swapped out a battery box is all. The bolts can be a real (^( without pulling the radiator. The box I wanted is solid. I don't see any pitting, but know better. Hopefully it suits my rebuild. Pulled the RH skirt off the same truck recently. Fitted a few skirts on it, practice I was hoping to use it for the rebuild as well. Nice fender, but too much rust in front. So I'm in the hunt for a RH fender. That or pair of replacements. __________________ Tony 71 Custom Deluxe, SWB, 2WD, 402, A/C. I developed an assembly kit for restoring the (a) truck from the ground up. My build thread, and more on the assembly kit https://67-72chevytrucks.com/vboard/...d.php?t=730025

04-26-2019, 02:28 AM	#16
Canuckvetter How did I get this OLD! Join Date: Dec 2014 Location: Lamont County, AB, CANADA Posts: 1,047	Re: What did you do to your truck today.The 3rd chapter http://67-72chevytrucks.com/vboard/a...1&d=1556259847 Cleaned up 4 horn buttons. Disassembled. Polished out scratches starting with 220 grit wet sand worked up to 7000 grit. Attached Images __________________ 1967 Oshawa built LWB Fleetside. 327,3 OTT, 515 Vermilion, CST, PS, PB, Shoulder Harness, Tach,Vac, Speed Warning, Choke Delete, Manual Throttle, Fawn interior. Dealer installed A/C 04/2015, N34 Rosewood Wheel 06/2023 Members who I have met personally. Metaldoc, chevnkevin, 62 Longbed, 72LHorn, 72MARIO, YBNORML, TBONE1964, Classic Bowties, Chevemall, Dagnabbitt.

04-26-2019, 07:55 PM	#17
SoCoC10 Senior Member Join Date: Nov 2014 Location: Colorado Posts: 3,303	Re: What did you do to your truck today.The 3rd chapter Finished my interior too Attached Images __________________ 07' Extcab Silverado Z71 Silver Birch, 5.3L HO 71' Cheyenne C10 Hugger Orange on Saddle SWB Besides these two, too Many to count

04-26-2019, 09:48 PM	#18
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,357	Re: What did you do to your truck today.The 3rd chapter Mostly, neglected and drank some beer, but I did finish blasting the air cleaner, shot the first coat of paint on it. Sorry, no pics, it’s at work. __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

04-27-2019, 12:16 AM	#20
Metaldoc Registered User Join Date: Apr 2015 Location: Ayr Ontario Posts: 1,122	Re: What did you do to your truck today.The 3rd chapter Mines all back as well. Attached Images __________________ Do it, Do it right, Do it right the first time



Register or Log In To remove these advertisements.

04-27-2019, 07:55 PM	#21
Ol Blue K20 Proprietor of Dale's Corner Join Date: Nov 2012 Location: Vacaville , CA Posts: 16,243	Re: What did you do to your truck today.The 3rd chapter I like it a lot!! How's it run? I'm guessing good as it looks..... __________________ "Some Days Chickens And Some Days Feathers" Dale XNGH ECV Sam Brannan 1004 R.I.P. 67ChevyRedneck R.I.P. Grumpy Old Man R.I.P. FleetsidePaul

04-27-2019, 11:33 PM	#22
Thrill4130 Active Member Join Date: Nov 2015 Location: Stallion Springs, CA Posts: 197	I tried getting my horn setup fixed. I was missing the pin. Also went to car show and saw this cool carryall. Posted via Mobile Device Attached Images

04-29-2019, 10:02 AM	#24
SoCoC10 Senior Member Join Date: Nov 2014 Location: Colorado Posts: 3,303	Re: What did you do to your truck today.The 3rd chapter First car show of the year. Attached Images __________________ 07' Extcab Silverado Z71 Silver Birch, 5.3L HO 71' Cheyenne C10 Hugger Orange on Saddle SWB Besides these two, too Many to count

04-29-2019, 10:06 AM	#25
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,357	Re: What did you do to your truck today.The 3rd chapter Replaced timing chain (stretched). __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear

Register or Log In To remove these advertisements.