![]() |
![]() |
#401 |
Registered User
Join Date: Nov 2013
Location: Stanley Co' Durham UK
Posts: 535
|
Re: Ian's Tennessee Honey '64 Short Box Step-side - England
Work on the truck had been a bit sporadic lately so I haven't been very good at documenting what I’ve done.
I finished the front end fender repair, came out ok The return on the lower repair panel was actually too short where the repair panel joins the original fender so I had to put a small piece of steel in to even it up The other thing I was missing were the brackets that hold the uppers seals at the rear of the fender. I'd used the rusted out parts as a pattern on the passenger side but on the drivers side I literally had nothing to work with and was completely stuck without them. Sometimes when you're working on US vehicles in the UK you can be stuck for the most simple of parts this was one of those situations. Luckily for me I'm a member of this forum which is full of great people. Rocknrod (thank you Sir!) put me onto Aspen Autos, if you've not used them I honsetly can't recommend them enough, and they suppleid me with an excellent used set at a very fair price. I've got the inside of the fender coated in stone guard and the fender returns into body colour,, next job is to fit the seals and then re-fit the fender.
__________________
Getting old sucks.............but it sure beats the alternative |
![]() |
![]() |
![]() |
#402 |
State of Confusion!
![]() ![]() Join Date: Jul 2002
Location: Gulfport, MS USA
Posts: 46,858
|
Re: Ian's Tennessee Honey '64 Short Box Step-side - England
Looks good!
![]()
__________________
Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God! |
![]() |
![]() |
![]() |
#403 |
Registered User
Join Date: Dec 2012
Location: Rochester, KENT
Posts: 10,528
|
Re: Ian's Tennessee Honey '64 Short Box Step-side - England
Last two updates are just great Ian.
Looking so good. Well done!
__________________
MY BUILD LINK: http://67-72chevytrucks.com/vboard/s...585901]Redneck Express - 1966 C10 Short Fleetside MY USA ROADTRIPS http://forum.retro-rides.org/thread/...2018-humdinger IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM MATE. |
![]() |
![]() |
![]() |
#404 |
Registered User
Join Date: Nov 2013
Location: Stanley Co' Durham UK
Posts: 535
|
Re: Ian's Tennessee Honey '64 Short Box Step-side - England
Today in County Durham it was one of those fabulous autumn (sorry fall) days, dry, sunny, cool but not too cool and you just know its going to be the last (or one of the last ones) until spring. Time to jump on the bike and grab those last few miles of the season. It was while I was riding I realised I hadn't given my latest bike a mention.
Those who follow my thread may remember that last year I did something I said I would never do.............no not that ![]() ![]() I also found time today to finish the fender closing panels and fit them using nylon "fir tree" clips
__________________
Getting old sucks.............but it sure beats the alternative |
![]() |
![]() |
![]() |
#405 |
Registered User
Join Date: Nov 2013
Location: Stanley Co' Durham UK
Posts: 535
|
Re: Ian's Tennessee Honey '64 Short Box Step-side - England
I also managed to get the fender back on, I'm very happy with the fit,
The door gap needs a little tweak at the bottom which I can get to once the door comes off. Tomorrow is the NSRA Northern Swap Meet, the last one of the season , so me and my mate Paul are off the Sheffield ![]()
__________________
Getting old sucks.............but it sure beats the alternative |
![]() |
![]() |
![]() |
#406 |
Registered User
Join Date: Dec 2012
Location: Rochester, KENT
Posts: 10,528
|
Re: Ian's Tennessee Honey '64 Short Box Step-side - England
That’s a pretty Harley.
You missed a spot on the fender ![]()
__________________
MY BUILD LINK: http://67-72chevytrucks.com/vboard/s...585901]Redneck Express - 1966 C10 Short Fleetside MY USA ROADTRIPS http://forum.retro-rides.org/thread/...2018-humdinger IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM MATE. |
![]() |
![]() |
![]() |
#407 |
Registered User
Join Date: Aug 2015
Location: Scotland
Posts: 737
|
Re: Ian's Tennessee Honey '64 Short Box Step-side - England
Looking good Ian.
If you and I can keep up the pace we should beat the two southern softies and get back on the road first :-):-):-) |
![]() |
![]() |
![]() |
#408 | |
Registered User
Join Date: Nov 2013
Location: Stanley Co' Durham UK
Posts: 535
|
Re: Ian's Tennessee Honey '64 Short Box Step-side - England
Thanks Rian, it's a shame you don't live closer you could have taken it for a run out, these modern Harleys ride really nice.
Quote:
I went to the Northern swap meet on Sunday in Sheffield, it may be Northern for Rian and Martin but for me and Bill there's nothing northern about it ![]() There were a few rods but mainly 50's chrome and fins stuff. There were a couple of trucks there, most seemed to have motorcycles on the back
__________________
Getting old sucks.............but it sure beats the alternative |
|
![]() |
![]() |
![]() |
#409 |
Registered User
Join Date: Nov 2013
Location: Stanley Co' Durham UK
Posts: 535
|
Re: Ian's Tennessee Honey '64 Short Box Step-side - England
This 69 was probably my favourite
I didn't buy much but I did blag this old slot mag for £10 ($12-$13). It will make a great hose reel for my garage wall. A quick truck up-date, I've pulled the drivers door to do the last of my cab rust repairs, I got the outer stripped ok, flipped it over and started on the inner. I had a pair of inner repair panels that I got from Martin a while back so i was good to go (or so I thought). The rust extends into the hinge pocket so I thought it best to check how far up the repair section goes. Hmmmm can you remember those spot the difference pictures that were in all of the comics when we were kids? It turns out they were a pair alright (as in two) it's just they were both the same side, oh darn ![]() New one is on order from Ecklers, luckily I've plenty to be getting on with
__________________
Getting old sucks.............but it sure beats the alternative |
![]() |
![]() |
![]() |
#410 | |
Registered User
Join Date: Aug 2015
Location: Scotland
Posts: 737
|
Re: Ian's Tennessee Honey '64 Short Box Step-side - England
Quote:
Shefield! May as well be another country to me, oh wait it is! |
|
![]() |
![]() |
![]() |
#411 | |
Registered User
Join Date: Dec 2012
Location: Rochester, KENT
Posts: 10,528
|
Re: Ian's Tennessee Honey '64 Short Box Step-side - England
Quote:
Sadly have to admit defeat here. Bill is right. But the Blazer is making me feel better. Ian and you have been quietly steaming ahead.
__________________
MY BUILD LINK: http://67-72chevytrucks.com/vboard/s...585901]Redneck Express - 1966 C10 Short Fleetside MY USA ROADTRIPS http://forum.retro-rides.org/thread/...2018-humdinger IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM MATE. |
|
![]() |
![]() |
![]() |
#412 |
Registered User
Join Date: Nov 2013
Location: Stanley Co' Durham UK
Posts: 535
|
Re: Ian's Tennessee Honey '64 Short Box Step-side - England
Sorry this is not really truck related but I thought some readers of this thread might find it interesting and there’s a transport link in here somewhere (honestly
![]() While walking my dog at the weekend something occurred to me. It’s strange how we’ve all visited places hundreds, even thousands of miles from home but you never seem to visit places that are on your doorstep. One such place for me is the Causey Arch, the oldest single arch railway bridge in the world and it’s about a mile from my front door. A bit of history In the 17 and 1800’s coal was transported in wooden wagons from the mines of County Durham (at that time the largest coal field in the world) to the port of Newcastle for onward shipment. These wagons travelled along unpaved roads know as wagonways, being in unpaved they would become rutted and pot-holed and often impassable. To combat this in the early 1700’s the practice of laying rails for the wagons to run on began and thus wagonways became railways. The mine owners even agreed a "standard" width for the rails so that everyone’s wagons could use the railways. This was 4 feet 8 1/2 inches which was considered to be the ideal width for the horse pulling the wagon and the man leading it. Today about 55% of the worlds trains still run on this "standard gauge". So what about the Causey Arch? It was designed and built in 1725 by local Master Mason Ralph Wood, to span the Causey gorge. At the time it was built it was the longest single arch bridge in Britain at 102 feet. The fate of Mr Wood But the real irony to this tale is the fate of Mr Wood himself. Convinced his construction was flawed in some way and believing it would collapse, he threw himself from the bridge to his death in the gorge some 150 feet below. They say that his ghost can be seen wandering the bridge at night and on a windy night you can hear his cries as he falls to his death. (this is Beamish….. we love a good ghost story). Anyway in 6 years it will be 300 years old... how wrong he was.
__________________
Getting old sucks.............but it sure beats the alternative |
![]() |
![]() |
![]() |
#413 |
Registered User
Join Date: Dec 2012
Location: Rochester, KENT
Posts: 10,528
|
Re: Ian's Tennessee Honey '64 Short Box Step-side - England
Sadly there have been many Ralph Woods’ in history.
Some for small reasons, some maybe by reason of “insanity” However, we can never really predict or even change the way they see their world. Thank you for sharing this.
__________________
MY BUILD LINK: http://67-72chevytrucks.com/vboard/s...585901]Redneck Express - 1966 C10 Short Fleetside MY USA ROADTRIPS http://forum.retro-rides.org/thread/...2018-humdinger IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM MATE. |
![]() |
![]() |
![]() |
#414 |
Moderator
![]() ![]() Join Date: Aug 2011
Location: China Spring, TX
Posts: 7,280
|
Re: Ian's Tennessee Honey '64 Short Box Step-side - England
Interesting story on the rail width. Glad I could help with info on the fender seals. Your doing great Ian.
![]()
__________________
Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats? |
![]() |
![]() |
![]() |
#415 | ||
Registered User
Join Date: Nov 2013
Location: Stanley Co' Durham UK
Posts: 535
|
Re: Ian's Tennessee Honey '64 Short Box Step-side - England
Quote:
Quote:
It's been a while since I last did a truck up-date progress has been slow but steady. I finished the fender, the repair panel was a really decent fit so took very little prep to be ready for paint, I did the cab corner floor and rocker at the same time. I've also made a start on the drivers door, which, if things go as planned and I buy new bedsides will be my last rust repair ![]() ![]()
__________________
Getting old sucks.............but it sure beats the alternative |
||
![]() |
![]() |
![]() |
#416 |
Registered User
Join Date: Nov 2013
Location: Stanley Co' Durham UK
Posts: 535
|
Re: Ian's Tennessee Honey '64 Short Box Step-side - England
What wasn't the same was the repair panel.
![]() ![]() Nothing to do but cut it up rework it (lots) and use only the pieces I need. When I'm working I often get so caught up in the job I often forget to take pictures at different stages I made a patch panel (can you guess which one) And tacked it in, I won't finish weld anything until I've had the door back on to check the fit.
__________________
Getting old sucks.............but it sure beats the alternative |
![]() |
![]() |
![]() |
#417 |
Registered User
Join Date: Nov 2013
Location: Stanley Co' Durham UK
Posts: 535
|
Re: Ian's Tennessee Honey '64 Short Box Step-side - England
I got as far as cutting and tacking in the front portion of the inner, so barring the finish welding the inner is done
And that's all the work I'll get done on the truck this year. So it only remains for me to wish you all a happy, healthy and prosperous 2019. May you get everything you need and most of what you want.
__________________
Getting old sucks.............but it sure beats the alternative |
![]() |
![]() |
![]() |
#418 |
Registered User
Join Date: Aug 2015
Location: Scotland
Posts: 737
|
Re: Ian's Tennessee Honey '64 Short Box Step-side - England
Your getting there Ian. Nice work.
Ive been beavering away the last week and I do need to update my project as well. At this rate we will definitely be finished before Martin and Rian!!!!! The North Rules! |
![]() |
![]() |
![]() |
#419 |
Registered User
Join Date: Dec 2012
Location: Rochester, KENT
Posts: 10,528
|
Re: Ian's Tennessee Honey '64 Short Box Step-side - England
Great progress Ian.
I hope I can replicate what you and Bill have done when I get there. Thank you for the steering wheel for the Blazer.
__________________
MY BUILD LINK: http://67-72chevytrucks.com/vboard/s...585901]Redneck Express - 1966 C10 Short Fleetside MY USA ROADTRIPS http://forum.retro-rides.org/thread/...2018-humdinger IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM MATE. |
![]() |
![]() |
![]() |
#420 |
Registered User
Join Date: Sep 2013
Location: Lake Norrell, Arkansas
Posts: 415
|
Re: Ian's Tennessee Honey '64 Short Box Step-side - England
Great looking repair patches. Your body working skills are awesome.
All I've done is buy a few parts and do a lot of thinking about the next step.
__________________
Vince Galatians 6:14 62 SWB stepside, 94 Wrangler, 99 Z71, 99 vette My Project http://67-72chevytrucks.com/vboard/s...d.php?t=719086 "If it's too loud, you're too old" ![]() |
![]() |
![]() |
![]() |
#421 |
Registered User
Join Date: Aug 2015
Location: Scotland
Posts: 737
|
Re: Ian's Tennessee Honey '64 Short Box Step-side - England
Blazer is looking nice though and at least you do have a running driving truck!
|
![]() |
![]() |
![]() |
#422 | |
Registered User
Join Date: Dec 2012
Location: Rochester, KENT
Posts: 10,528
|
Re: Ian's Tennessee Honey '64 Short Box Step-side - England
Quote:
Thankfully. HIJACK MODE ON. And the steering wheel,was delivered as mentioned,by the chirpy courier lady. Thank you to Ian Brown again. ![]() Closer inspection showed years of wear and tear and muckyness. ![]() Some rust on the horn button itself. I wanted to give it a coat of paint, but suspect it was made that way, because it does not get paint. ![]() ![]() Spring plate was very much rusty too. Stopped at this point. ![]() Cleaning took just over two hours with Cillit Bang ammonia based cleaner and a kitchen scoured, and a sharp knife in places. ![]() And offered up in the truck different size for sure. And note the centre is not Centre. ![]() ![]() I will fit it after the New Years Festivities are over. Back to work soon. HAPPY NEW YEAR ALL. Here’s to a car and truck filled 2019.
__________________
MY BUILD LINK: http://67-72chevytrucks.com/vboard/s...585901]Redneck Express - 1966 C10 Short Fleetside MY USA ROADTRIPS http://forum.retro-rides.org/thread/...2018-humdinger IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM MATE. |
|
![]() |
![]() |
![]() |
#423 |
State of Confusion!
![]() ![]() Join Date: Jul 2002
Location: Gulfport, MS USA
Posts: 46,858
|
Re: Ian's Tennessee Honey '64 Short Box Step-side - England
Looking good Rian. Yeah they off centered then I guess so us plump Americans can get in and out easier.
![]()
__________________
Bill 1970 Chevy Custom/10 LWB Fleetside 2010 Toyota Tacoma PreRunner SR5 Double Cab - DD Member of Louisiana Classic Truck Club (LCTC) Bill's Gallery Life isn't tied with a bow, but it's still a gift. Live simply. Love generously. Care deeply. Speak kindly. Leave the rest to God! |
![]() |
![]() |
![]() |
#424 |
Registered User
Join Date: Nov 2013
Location: Stanley Co' Durham UK
Posts: 535
|
Re: Ian's Tennessee Honey '64 Short Box Step-side - England
A quick up-date (while I remember),
I thought I'd get away with 2 corner repairs on the outer skin but it turned out much worse than I thought and ended up replacing the whole lower section. Doing the outer skin in 2 halves is not the most efficient way but hey-ho. Once everything was tacked in place I hung the door back on the cab to check alignment and fit (I forgot to take a photo) and the fit was really good. Once happy with the fit I fully welded the inner. I had weld the outer skin a little at a time, as the welds cooled and contracted they pulled the skin inwards making the skin concave and creating a hollow. So it was weld a little, hammer and dolly back out weld repeat until done. The access to the rear of the door skin is really restricted, you have to wedge your arm through the larger hole at the top. If only my arm was a foot longer and I had an extra elbow I might have avoided this bruise ![]() ![]() The outer skin still needs a little work but the shape is 95% there
__________________
Getting old sucks.............but it sure beats the alternative |
![]() |
![]() |
![]() |
#425 | |
Registered User
Join Date: Aug 2015
Location: Scotland
Posts: 737
|
Re: Ian's Tennessee Honey '64 Short Box Step-side - England
Quote:
Nice work though Ian. |
|
![]() |
![]() |
![]() |
Bookmarks |
|
|