Do you need '64-'66 Chevy Truck Parts?

[shortbed70]

Do you have anymore pics of the 64-66 cabs? I think I'm going to do this other than put 400+ into my cab. I thought there were some on here but couldn't find them.

[LILRED66]

Originally Posted by shortbed70

Do you have anymore pics of the 64-66 cabs? I think I'm going to do this other than put 400+ into my cab. I thought there were some on here but couldn't find them.

Here are a few more.

[LILRED66]

Originally Posted by joe231

got pics of the foam yet? no hurry, just checking

how much for the radiator parts?

oh and did you ever find a factory washer reservoir and bracket?

i'm planning a trip to see you soon

Here are two different factory foam seat bottoms. Both have some wear on the drivers area, but they are useable and can be repaired piecing in a good chunk of seat foam.

The top radiator support, cushions and bottom craddles & cushions are $40.00, plus $8.00 packanging & shipping.

I don't have a good, used wiper fluid bottle, but I do have a few good, used factory wiper fluid bottle brackets. They are $20.00, plus $6.00 packaging & shipping.

I can combine shipping or you can make a trip up to my shop to pick up in person. Please let me know your thoughts on these items or other 4-5-6 Chevy truck parts in the future.

[joe231]

Originally Posted by LILRED66

Here are two different factory foam seat bottoms. Both have some wear on the drivers area, but they are useable and can be repaired piecing in a good chunk of seat foam.

The top radiator support, cushions and bottom craddles & cushions are $40.00, plus $8.00 packanging & shipping.

I don't have a good, used wiper fluid bottle, but I do have a few good, used factory wiper fluid bottle brackets. They are $20.00, plus $6.00 packaging & shipping.

I can combine shipping or you can make a trip up to my shop to pick up in person. Please let me know your thoughts on these items or other 4-5-6 Chevy truck parts in the future.

cool, thanks Tony
that foam doesn't look better than what we have so I'll pass on it, but i want the radiator parts and the washer bottle bracket.
I am planning on coming your way in the next few weeks, I will let you know soon
Thanks!

[LILRED66]

Originally Posted by joe231

cool, thanks Tony
that foam doesn't look better than what we have so I'll pass on it, but i want the radiator parts and the washer bottle bracket.
I am planning on coming your way in the next few weeks, I will let you know soon
Thanks!

How about $25.00 for the radiator support, lower craddle and cushions and $15.00 for the washer bottle bracket for a total of $40.00, including packaging & shipping? Do you want to do the deal now or wait until you come up to KC?

[joe231]

Originally Posted by LILRED66

How about $25.00 for the radiator support, lower craddle and cushions and $15.00 for the washer bottle bracket for a total of $40.00, including packaging & shipping? Do you want to do the deal now or wait until you come up to KC?

sorry, guess I missed this before..
will you be around the weekend of Feb. 21st?
I'll get the radiator parts, washer bracket, and one of those hose set-ups from you for a total of $80...and maybe some other stuff, if the budget allows...

[LILRED66]

and a few more of the cab.

[LILRED66]

Don't let the surface rust scare you...it is very solid, but the previous owner stripped it, but did not protect with primer, so it has lots of natural rust patina.

[LILRED66]

dirty trucker:

Thanks for the inquiry. I just sold the last decent swb fleetside that I had in my inventory. I come across them from time-to-time, so I will post a thread when the next one comes along.

Sorry I couldn't help you with this item, but please keep me in mind for your other 4-5-6 Chevy truck parts in the future.

[98L150]

lilred66,

do you have an upper heater block off plate that bolt tot he firewall just beneath the cowl?

jeff

[LILRED66]

Originally Posted by 98L150

lilred66,

do you have an upper heater block off plate that bolt tot he firewall just beneath the cowl?

jeff

Jeff:

Thanks for the inquiry. I have the both heater block-off plates. Do you need the long, slender block-off plate or the square block-off plate? I have both, so let me know.

[98L150]

I need the long slender one the goes just above the upper fire-wall lip that is just below the wiper cowl.

Originally Posted by LILRED66

Jeff:

Thanks for the inquiry. I have the both heater block-off plates. Do you need the long, slender block-off plate or the square block-off plate? I have both, so let me know.

[LILRED66]

Originally Posted by 98L150

lilred66,

do you have an upper heater block off plate that bolt tot he firewall just beneath the cowl?

jeff

Jeff:

Did you get your upper heater delete plate? If not, please let me know. Thanks for your business.

[TwoFiftyShifter]

Tony, I saw a picture in another thread at your shop, looked like you had tons of doors. What's the scoop on all of those? I need one for my '64, is that too big to ship? How many trucks do you have at your shop anyway? Also, I see it's called 4-5-6 chevy trucks, do you deal with 60-63 at all?

[LILRED66]

Originally Posted by TwoFiftyShifter

Tony, I saw a picture in another thread at your shop, looked like you had tons of doors. What's the scoop on all of those? I need one for my '64, is that too big to ship? How many trucks do you have at your shop anyway? Also, I see it's called 4-5-6 chevy trucks, do you deal with 60-63 at all?

Ron:

Good morning and thanks for the inquiry. I have accumulated several doors over the years, in varying condition...some not so good all the way up to pretty decent. If they are not too bad, I have them sandblasted, do the panel replacement and sell them as good, used, repaired door shells. I have a few on my workbench right now with repairs underway.

I have shipped door shells before, but it is rather pricey...to NY, via motor freight, delivered to a business, would be $80.00-$120.00, depending on the carrier.

I several 4-5-6 Chevy trucks of my own and I also work on 4-5-6 Chevy trucks at my shop. My truck stuff is a sideline hobby, but it has taken on an identity of it's own with all the parts I have acquired and sell on a few Chevy truck specific web sites, craigs list and eBay. I primarily deal with 4-5-6 Chevy trucks, but, as you know, some parts are interchangeable amoung all years '60-'66. I am the most familiar with 4-5-6 Chevy trucks and prefer them, but I like all the trucks from the '60-'66 era.

Please let me know if I can help you with any 4-5-6 Chevy truck parts in the future and thanks for the inquiry.

[LILRED66]

Replacement kit to restore the original "hard pipe" radiator hose arrangement found on the '64-'66 Chevy trucks with a 283 or 327 and three core or four core Harrison radiator.

The kit includes "factory-correct" hard pipe (1 each), starter hoses (2 each-1 at water inlet & 1 at radiator inlet) and hose clamps (4 each). The hard pipe is painted Underhood Black, like the original equipment.

The complete "hard pipe" radiator hose assembly is $40.00, plus $9.00, packaging & shipping, via UPS or FedEx (with tracking). I accept money order, cashiers check or PayPal (at dynamiccontracting@sbcglobal.net) and will ship kit within 24 hours of receipt of payment.

Here are a few pictures of this setup installed on my '66 Chevy C20 Custom Camper lwb fleetside truck with a factory 327 and a factory Harrison 4-core radiator. The last picture is the loose assembly, so you can see what is included. The kit will include the original style tower clamps, manufactured by Wittek Manufacturing Company, as used on all GM vehicles in the sixties and seventies.

Please let me know if you are interested in this item or other 4-5-6 Chevy trucks parts in the future.

[joe231]

Cool,
Thanks Tony!!

[ATCFLYBOY02]

Sir,

[ATCFLYBOY02]

Sorry..

Sir,
i am in need of a new things. #1 is a 64-66 cab, doors (shell or loaded), and hood. I am looking for something that has not been crashed as far as the cab goes. For the doors, I'm looking for something to prep and paint, that goes for the hood as well. If I'm asking to much, please let me know. I know its hard to find that "perfect" used body part but any assistance would be much appriciated!

Doc

[LILRED66]

Originally Posted by ATCFLYBOY02

Sorry..

Sir,
i am in need of a new things. #1 is a 64-66 cab, doors (shell or loaded), and hood. I am looking for something that has not been crashed as far as the cab goes. For the doors, I'm looking for something to prep and paint, that goes for the hood as well. If I'm asking to much, please let me know. I know its hard to find that "perfect" used body part but any assistance would be much appriciated!

Doc

Doc:

Good morning and thanks for the inquiry. I have a few very nice hoods.

The cab and doors I have need some work. I can do the patch panel installation and get them ready for bodyman, but they need some final prep, prior to going to paint.

It is very rare to come across good, used sheetmetal that is "perfect", unless it is factory take-off OEM stuff or NOS...I have neither and they go for a pretty penny or several pretty pennies.

I am currently repairing a good, used cab and a pair of doors for a fellow, so that is an option and I will do it at a reasonable price for the cost of panels and my labor.

Thanks for the opportunity and let me know if I can help you with these items or other 4-5-6 Chevy truck parts in the future.

[ruffrida2005]

Hey LilRed do you have a Tilt steering for a 64? that's floor shift? and how much, send me a PM or email to ruffrida2005@yahoo.com

[LILRED66]

No such thing as a factory tilt steering for a '64. They weren't available with a tilt on the 4-5-6 Chevy trucks, but I know there are some direct bolt-in tilt columns, but I am not sure what years.

Sorry I couldn't help you with this item, but please keep me in mind for your other 4-5-6 Chevy truck parts needs.

[pittdawg]

Hey Red I need a oil pan for the 250 in my 66' C-10. Can you help me out? Thanks

[LILRED66]

Originally Posted by pittdawg

Hey Red I need a oil pan for the 250 in my 66' C-10. Can you help me out? Thanks

pittdawg:

Good afternoon and thanks for the inquiry. I have a good, used oil pan from a '64 Chevy C10 250 six cylinder parts truck, but it is on a running engine, so I would rather not pull the pan, since it is a runner. I will check some other sources to see what I can come up with and let you know. Sorry I couldn't help you with this item, but please keep me in mind for your other 4-5-6 Chevy truck parts needs in the future.

[valero]

Originally Posted by lilred66

do you need parts for your 4-5-6 chevy truck project? During the process of collecting and fixing up my trucks, i have acquired many good, used oem parts for 4-5-6 chevy trucks. I am able to ship most parts, however, due to size, weight and cost, some parts, like cabs, frames and beds, are not very economical to ship.

Let me know your 4-5-6 chevy truck part needs and i will try to take care of it.

hey tony...i need to redo the whole front end suspension on my 66 c10...anything available???