68 Burb... here we go!! - Page 17 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

dbomb53 · 09-18-2012, 11:37 PM

Nova is bad A$$, now stop with the talk and get some pics up of the burb! haha....

CLTBurban · 09-26-2012, 01:31 PM

Hey Juan,

Any chance of getting some pic's of the Scott's tank you mentioned in one of the other threads? I'm very interested in doing the same thing with my burb, but wanted to see how you had it setup after shortening the filler neck and all. Thanks, as always!!!

jmedero · 09-26-2012, 03:58 PM

He clt the tank hangs down 5 inches below the frame in "prebuilt" form. Justin said he can weld the mounting tabs higher or lower on the tank to clear your specs. I'll post a pic of the tank as soon as I can.
Posted via Mobile Device

jmedero · 09-26-2012, 04:05 PM

Pulled the frame out to clean it up and paint it. Also going to run my air lines and brake lines while I'm at it.
Posted via Mobile Device

CLTBurban · 09-26-2012, 08:17 PM

^^^^^^ very cool!

CLTBurban · 09-26-2012, 08:19 PM

I'm trying to gather the nerve to separate my body from the frame. Difficult? Tricks or tips you can give us?

jmedero · 09-26-2012, 11:07 PM

It wasn't bad really. Me and a buddy did it in about 45 min. The pita part is the rear body mounts that love to spin in the wood. If you have not notched the rear yet you'll be good. I had to lift the body up sooo high to get the frame notches to clear the floor board.

Go for it man.
Posted via Mobile Device

CLTBurban · 09-26-2012, 11:30 PM

Cool. She's not notched (yet), but she will be by the time the frame rolls back under. I'll definitely need to compensate for the height difference. Thanks, as always!

jmedero · 12-10-2012, 10:29 PM

Well finally got power out at the new shop. Got all of the electrical finished. I'm waiting on a new electric start motor for my air compressor. Still have some exterior trim to go up on shop as well. Very stoked.
Got my new bridge worked out today. Cut and fitted the pieces in. Ill weld them in tonight when everyone goes to sleep, ill go play.
What do you think of the bag plates?
Posted via Mobile Device

**Hart_Rod** · 12-10-2012, 10:38 PM

Sweet! Progress in your future I see...
Posted via Mobile Device

jmedero · 12-10-2012, 11:09 PM

Thanks master yoda
Posted via Mobile Device

blfuller123 · 12-11-2012, 08:31 AM

Looking good

raull · 12-11-2012, 08:34 AM

nice and bright in there !!!! plates are coming out nice also !!!

Splash4195 · 12-11-2012, 11:20 PM

Nice Build!

jmedero · 12-11-2012, 11:24 PM

Thanks splash.
Posted via Mobile Device

jmedero · 01-03-2013, 01:27 AM

Ok got the rear susp all done. I started cleaning and prepping the frame for a good coat of paint. Then it's time to run brake lines, gas lines and I'm going to give the SS air lines a try. From what I've read the ss lines grab and hold on in the air fittings really good. Hoping to roll it out is the shop this weekend and power wash it all down and start painting it. I'm so ready to be done with this part of the build.
I need a picture to see what the rear of the frame is sup to look like. I removed the hitch the PO had put in there and need to see the rear most section of the frame and the bumper brackets. If you have some pics feel free to post them up.
Thanks

Posted via Mobile Device

jmedero · 01-13-2013, 01:24 AM

All painted. I hope to start running lines next week. She rolled out of the garage for a good scrub down today. Then drip dry while I cleaned the shop up. The milk crates worked out good to get it off the ground so I could clean it all up.

Thinking of what coating to do on the underside of the Burb? Should it be done before frame goes back under it?
Posted via Mobile Device

**Hart_Rod** · 01-13-2013, 09:03 AM

Looks good! Do the undercoatingi before you put it back on the frame.....

Posted via Mobile Device

jmedero · 01-13-2013, 10:09 AM

Which kind should I use? I used por15 on the nova. Any suggestions?
Posted via Mobile Device

**Hart_Rod** · 01-13-2013, 10:17 AM

Quote:

Originally Posted by jmedero

Which kind should I use? I used por15 on the nova. Any suggestions?
Posted via Mobile Device

Por will probably be the easiest. I would do that and then possibly rattle can some rubberized undercoating.
Posted via Mobile Device

jmedero · 01-13-2013, 11:42 PM

Will do master yoda.
Posted via Mobile Device

raull · 01-14-2013, 10:18 AM

Looking good bud !!! Love the shop area !!!

jmedero · 01-14-2013, 10:22 PM

Thanks man. Prob won't be till Thursday before I can get out there again.
Posted via Mobile Device

sunk99 · 01-18-2013, 10:50 PM

Signing on here, Burb is looking nice.I'm waiting to get mine back from metal working shop now.

Bagood · 01-21-2013, 12:05 AM

looking good !!!!!!!!

09-18-2012, 11:37 PM	#401
dbomb53 Registered User Join Date: Aug 2010 Location: phoenix az Posts: 363	Re: 68 Burb... here we go!! Nova is bad A$$, now stop with the talk and get some pics up of the burb! haha.... __________________ ----------------------------------------------- "I wanna be like Dino when I grow up"

09-26-2012, 01:31 PM	#402
CLTBurban Registered User Join Date: Jul 2008 Location: Charlotte, NC Posts: 220	Re: 68 Burb... here we go!! Hey Juan, Any chance of getting some pic's of the Scott's tank you mentioned in one of the other threads? I'm very interested in doing the same thing with my burb, but wanted to see how you had it setup after shortening the filler neck and all. Thanks, as always!!! __________________ '72 GMC Suburban 1/2 Ton (Red) '68 C10 Short Fleet (OG 503 Light Green and Patina) '70 C30 Dually (OG City of Charlotte Welding Truck) Past 67-72's Chevy Trucks '68 C10 Short Fleet on 20" Coy's, '72 C20 Suburban (Ochre Big Block), '69 C20 Suburban (Silver), '69 C10 Suburban (Red/White on Boyd's), '72 C10 Short Fleet (Ochre on Torq's), '70 C10 Short Fleet (POS)

09-26-2012, 03:58 PM	#403
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,073	Re: 68 Burb... here we go!! He clt the tank hangs down 5 inches below the frame in "prebuilt" form. Justin said he can weld the mounting tabs higher or lower on the tank to clear your specs. I'll post a pic of the tank as soon as I can. Posted via Mobile Device __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

09-26-2012, 04:05 PM	#404
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,073	Re: 68 Burb... here we go!! Pulled the frame out to clean it up and paint it. Also going to run my air lines and brake lines while I'm at it. Posted via Mobile Device __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

09-26-2012, 08:17 PM	#405
CLTBurban Registered User Join Date: Jul 2008 Location: Charlotte, NC Posts: 220	Re: 68 Burb... here we go!! ^^^^^^ very cool! __________________ '72 GMC Suburban 1/2 Ton (Red) '68 C10 Short Fleet (OG 503 Light Green and Patina) '70 C30 Dually (OG City of Charlotte Welding Truck) Past 67-72's Chevy Trucks '68 C10 Short Fleet on 20" Coy's, '72 C20 Suburban (Ochre Big Block), '69 C20 Suburban (Silver), '69 C10 Suburban (Red/White on Boyd's), '72 C10 Short Fleet (Ochre on Torq's), '70 C10 Short Fleet (POS)

09-26-2012, 08:19 PM	#406
CLTBurban Registered User Join Date: Jul 2008 Location: Charlotte, NC Posts: 220	Re: 68 Burb... here we go!! I'm trying to gather the nerve to separate my body from the frame. Difficult? Tricks or tips you can give us? __________________ '72 GMC Suburban 1/2 Ton (Red) '68 C10 Short Fleet (OG 503 Light Green and Patina) '70 C30 Dually (OG City of Charlotte Welding Truck) Past 67-72's Chevy Trucks '68 C10 Short Fleet on 20" Coy's, '72 C20 Suburban (Ochre Big Block), '69 C20 Suburban (Silver), '69 C10 Suburban (Red/White on Boyd's), '72 C10 Short Fleet (Ochre on Torq's), '70 C10 Short Fleet (POS)

09-26-2012, 11:07 PM	#407
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,073	Re: 68 Burb... here we go!! It wasn't bad really. Me and a buddy did it in about 45 min. The pita part is the rear body mounts that love to spin in the wood. If you have not notched the rear yet you'll be good. I had to lift the body up sooo high to get the frame notches to clear the floor board. Go for it man. Posted via Mobile Device __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

09-26-2012, 11:30 PM	#408
CLTBurban Registered User Join Date: Jul 2008 Location: Charlotte, NC Posts: 220	Re: 68 Burb... here we go!! Cool. She's not notched (yet), but she will be by the time the frame rolls back under. I'll definitely need to compensate for the height difference. Thanks, as always! __________________ '72 GMC Suburban 1/2 Ton (Red) '68 C10 Short Fleet (OG 503 Light Green and Patina) '70 C30 Dually (OG City of Charlotte Welding Truck) Past 67-72's Chevy Trucks '68 C10 Short Fleet on 20" Coy's, '72 C20 Suburban (Ochre Big Block), '69 C20 Suburban (Silver), '69 C10 Suburban (Red/White on Boyd's), '72 C10 Short Fleet (Ochre on Torq's), '70 C10 Short Fleet (POS)

12-10-2012, 10:29 PM	#409
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,073	Re: 68 Burb... here we go!! Well finally got power out at the new shop. Got all of the electrical finished. I'm waiting on a new electric start motor for my air compressor. Still have some exterior trim to go up on shop as well. Very stoked. Got my new bridge worked out today. Cut and fitted the pieces in. Ill weld them in tonight when everyone goes to sleep, ill go play. What do you think of the bag plates? Posted via Mobile Device __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

12-10-2012, 10:38 PM	#410
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,860	Re: 68 Burb... here we go!! Sweet! Progress in your future I see... Posted via Mobile Device __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

12-10-2012, 11:09 PM	#411
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,073	Re: 68 Burb... here we go!! Thanks master yoda Posted via Mobile Device __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

12-11-2012, 08:31 AM	#412
blfuller123 Registered User Join Date: Jul 2011 Location: Lake Jackson, TX Posts: 486	Re: 68 Burb... here we go!! Looking good

12-11-2012, 08:34 AM	#413
raull Registered User Join Date: Mar 2009 Location: miramar florida Posts: 1,232	Re: 68 Burb... here we go!! nice and bright in there !!!! plates are coming out nice also !!! __________________ check out my build thread 71 c/10 step side 5.3 twin turbo http://67-72chevytrucks.com/vboard/s...d.php?t=485320 raul

12-11-2012, 11:20 PM	#414
Splash4195 Registered User Join Date: Jan 2010 Location: Minnesota Posts: 341	Re: 68 Burb... here we go!! Nice Build!

12-11-2012, 11:24 PM	#415
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,073	Re: 68 Burb... here we go!! Thanks splash. Posted via Mobile Device __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084



Register or Log In To remove these advertisements.

01-03-2013, 01:27 AM	#416
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,073	Re: 68 Burb... here we go!! Ok got the rear susp all done. I started cleaning and prepping the frame for a good coat of paint. Then it's time to run brake lines, gas lines and I'm going to give the SS air lines a try. From what I've read the ss lines grab and hold on in the air fittings really good. Hoping to roll it out is the shop this weekend and power wash it all down and start painting it. I'm so ready to be done with this part of the build. I need a picture to see what the rear of the frame is sup to look like. I removed the hitch the PO had put in there and need to see the rear most section of the frame and the bumper brackets. If you have some pics feel free to post them up. Thanks Posted via Mobile Device __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

01-13-2013, 01:24 AM	#417
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,073	Re: 68 Burb... here we go!! All painted. I hope to start running lines next week. She rolled out of the garage for a good scrub down today. Then drip dry while I cleaned the shop up. The milk crates worked out good to get it off the ground so I could clean it all up. Thinking of what coating to do on the underside of the Burb? Should it be done before frame goes back under it? Posted via Mobile Device __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

01-13-2013, 09:03 AM	#418
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,860	Re: 68 Burb... here we go!! Looks good! Do the undercoatingi before you put it back on the frame..... Posted via Mobile Device __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

01-13-2013, 10:09 AM	#419
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,073	Re: 68 Burb... here we go!! Which kind should I use? I used por15 on the nova. Any suggestions? Posted via Mobile Device __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

01-13-2013, 11:42 PM	#421
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,073	Re: 68 Burb... here we go!! Will do master yoda. Posted via Mobile Device __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

01-14-2013, 10:18 AM	#422
raull Registered User Join Date: Mar 2009 Location: miramar florida Posts: 1,232	Re: 68 Burb... here we go!! Looking good bud !!! Love the shop area !!! __________________ check out my build thread 71 c/10 step side 5.3 twin turbo http://67-72chevytrucks.com/vboard/s...d.php?t=485320 raul

01-14-2013, 10:22 PM	#423
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,073	Re: 68 Burb... here we go!! Thanks man. Prob won't be till Thursday before I can get out there again. Posted via Mobile Device __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

01-18-2013, 10:50 PM	#424
sunk99 Registered User Join Date: Sep 2011 Location: Knoxville TN Posts: 399	Re: 68 Burb... here we go!! Signing on here, Burb is looking nice.I'm waiting to get mine back from metal working shop now.

01-21-2013, 12:05 AM	#425
Bagood Registered User Join Date: Oct 2011 Location: College Station, Texas Posts: 68	Re: 68 Burb... here we go!! looking good !!!!!!!!

Register or Log In To remove these advertisements.