Bowtie468's Extreme '68 BuildPage - Page 17 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

raull · 12-12-2012, 01:55 PM

Quote:

Originally Posted by Bowtie468

Wow. That's a sweet setup , Raul ! I have looked at FAST efi and they have some of the best stuff out there . I wound up making a killer deal on a Ram Jet setup from Street & Performance.
Posted via Mobile Device

sweet !!!! any pix of it yet ?

**Bowtie468** · 12-12-2012, 10:37 PM

Quote:

Originally Posted by raull

sweet !!!! any pix of it yet ?

Here's one. I'm excited about it as i've been wanting to go efi for a while now. Yet i do have my work cut out for me. First off, out comes the engine (again) to smooth all the casting and get coated in Chrevrolet Orange POR 15. Camshaft will be replaced with a much tamer hydraulic roller, replumb fuel system, redo a bunch of electrical and install S&P's harness. Gear drive has to go so that the knock sensor doesnt have fits. I was getting tired of it already.

gdavis · 12-12-2012, 10:44 PM

Quote:

Originally Posted by Bowtie468

Here's one. I'm excited about it as i've been wanting to go efi for a while now. Yet i do have my work cut out for me. First off, out comes the engine (again) to smooth all the casting and get coated in Chrevrolet Orange POR 15. Camshaft will be replaced with a much tamer hydraulic roller, replumb fuel system, redo a bunch of electrical and install S&P's harness. Gear drive has to go so that the knock sensor doesnt have fits. I was getting tired of it already.

nice set up you got there. I like.

Bennett68C10 · 12-12-2012, 10:49 PM

Love the changes you are making to the engine Chris
Posted via Mobile Device

**Bowtie468** · 12-13-2012, 11:17 PM

Thanks guys. I also got the one piece windows installed along with the Firebird mirrors.

Bennett68C10 · 12-13-2012, 11:22 PM

Looks great, what kit did you use for the windows. Sorry if you mentioned it previously in your thread and I missed it. How was the install and are you happy with the quality?
Posted via Mobile Device

**Bowtie468** · 12-14-2012, 12:04 AM

Quote:

Originally Posted by Bennett--G4L

Looks great, what kit did you use for the windows. Sorry if you mentioned it previously in your thread and I missed it. How was the install and are you happy with the quality?
Posted via Mobile Device

Keith, i used the One Piece Products kit. Overall im pleased with it. Ben Tapia did a nice job on these kits but they are definately not a " bolt in and go" ! You've got to make it work. I give 2 thumbs up on the revised check link for the hinges.

Bennett68C10 · 12-14-2012, 09:28 AM

Thanks for the info Chris, I will look into them

thor · 12-14-2012, 03:20 PM

Is it too early for an overall shot???

Would be great to see it since you've added so much.

**67cheby** · 12-14-2012, 03:27 PM

absolutely Gorgeous !

**Bowtie468** · 12-14-2012, 10:32 PM

Quote:

Originally Posted by thor

Is it too early for an overall shot???

Would be great to see it since you've added so much.

Well, i still dont have a bed on it yet. But i suppose i could come up with something. I've been homebound with the flu since Wednesday but as soon as i get back in the shop i'll shoot a few more pics.

raull · 12-15-2012, 05:04 PM

ram jet set up looks sick bud !!!! and nice job on one piece windows !!!!

thor · 12-17-2012, 02:20 PM

Quote:

Originally Posted by Bowtie468

Well, i still dont have a bed on it yet. But i suppose i could come up with something. I've been homebound with the flu since Wednesday but as soon as i get back in the shop i'll shoot a few more pics.

Hope ya feel better soon

*bk2life* · 01-02-2013, 04:11 AM

freakin killer build, i know you know this already though!!

**Bowtie468** · 01-03-2013, 10:06 AM

Quote:

Originally Posted by thor

Hope ya feel better soon

I'm all good now ! Thanks

Quote:

Originally Posted by bk2life

freakin killer build, i know you know this already though!!

Thank you !
Posted via Mobile Device

gringoloco · 01-03-2013, 10:26 AM

Quote:

Originally Posted by Bowtie468

Thanks guys. I also got the one piece windows installed along with the Firebird mirrors.

More details on the mirrors? Those look good!

**Bowtie468** · 01-03-2013, 11:56 AM

Quote:

Originally Posted by gringoloco

More details on the mirrors? Those look good!

Thanks, they are 67-69 Firebird mirrors from Dynacorn . Great quality. Nice and tight . The arms are a little shorter but it keeps them tucked in while still being completely functional . Without the vent windows , I moved them forward a good bit .
Posted via Mobile Device

**Bowtie468** · 01-10-2013, 02:16 AM

Well, since i cant seem to leave anything as is, i decided to gasket match the tpi plenum to the intake. While the runners are really nice as cast, this transition area on the plenum was a little rough for my likeing. I also removed the 3" tall spacers and the unit looks much nicer without them. Plus i surely wasnt cutting my hood.

No pics yet without the spacers as i still have the unit blown apart.

hgs_notes · 01-10-2013, 10:09 AM

Looks good.

**superflysteiny** · 01-14-2013, 07:29 PM

nice i like it

Texas Pugh · 02-10-2013, 03:18 AM

Awesome build. Great job. Gonna be a showstopper! Really nice!!

Bennett68C10 · 03-06-2013, 11:54 AM

Any updates Chris

**Bowtie468** · 03-08-2013, 02:02 AM

Quote:

Originally Posted by Bennett--G4L

Any updates Chris

Still working on it . The whole bed is now ready for paint , minus the tailgate . The two that I had just didn't measure up . I would up springing for a really sweet OEM gate . ( Thanks Daniel ! [ dirish ] )

Still have a few more changes to make for the efi . I did get the tank pulled and installed the new in-tank pump .

As for the motor , well I wound up taking a few steps backwards on that. I was just planning to pull the motor and repaint and install new cam . Well , I pulled the heads off and disassembled for paint . Wound up installing new springs and valve job . Then , when i came to the block , I figured that too would be much easier if it was bare . So once tore down , proceeded to smooth all the casting . The POR 15 paint looks much better with it slicked out . While its apart , if course it's getting new bearings , rings .

So in a nutshell , an engine repaint turned into a total engine build ! And I wonder why this truck is not finished yet. . Lol !
Posted via Mobile Device

**68bowtie** · 03-08-2013, 03:41 AM

Quote:

Originally Posted by Bowtie468

So in a nutshell , an engine repaint turned into a total engine build ! And I wonder why this truck is not finished yet. . Lol !
Posted via Mobile Device

i'm sure you will be glad you took the time

Bennett68C10 · 03-08-2013, 09:21 AM

Quote:

Originally Posted by Bowtie468

Still working on it . The whole bed is now ready for paint , minus the tailgate . The two that I had just didn't measure up . I would up springing for a really sweet OEM gate . ( Thanks Daniel ! [ dirish ] )

Still have a few more changes to make for the efi . I did get the tank pulled and installed the new in-tank pump .

As for the motor , well I wound up taking a few steps backwards on that. I was just planning to pull the motor and repaint and install new cam . Well , I pulled the heads off and disassembled for paint . Wound up installing new springs and valve job . Then , when i came to the block , I figured that too would be much easier if it was bare . So once tore down , proceeded to smooth all the casting . The POR 15 paint looks much better with it slicked out . While its apart , if course it's getting new bearings , rings .

So in a nutshell , an engine repaint turned into a total engine build ! And I wonder why this truck is not finished yet. . Lol !
Posted via Mobile Device

Sounds like me, I'm pulling my complete rolling chassis apart to install Porterbuilt Front/Rear Dropmembers and re-paint the frame, so I'm taking two steps back to take a step forward as well. You will be happier in the end that you did exactly what you wanted atleast thats how I feel about mine

Can't wait to see some updated pics.

12-12-2012, 10:49 PM	#404
Bennett68C10 Registered User Join Date: Dec 2006 Location: Toms River, NJ Posts: 5,518	Re: Bowtie468's Extreme '68 BuildPage Love the changes you are making to the engine Chris Posted via Mobile Device __________________ Keith 66 Suburban Burb Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=751361 IG: bennett68c10

12-13-2012, 11:17 PM	#405
Bowtie468 Senior Member Join Date: Jun 2002 Location: Cecilia, Louisiana Posts: 1,638	Re: Bowtie468's Extreme '68 BuildPage Thanks guys. I also got the one piece windows installed along with the Firebird mirrors. Attached Images __________________ Chris click here to see my buildpage http://67-72chevytrucks.com/vboard/s...d.php?t=394656 ---------------------------------- 1979 C10 Silverado Big10 SWB Factory 454/400 Cardinal Red/Santa Fe Tan (original paint) 1969 Camaro X44 LS swap 1968 C10 SWB Fleetside (SOLD) 468BBC MultiPort TPI / Dynamic EFI P4 Black/Black 1963 Nova SS convertible (SOLD) 194 I6/ PowerGlide

12-13-2012, 11:22 PM	#406
Bennett68C10 Registered User Join Date: Dec 2006 Location: Toms River, NJ Posts: 5,518	Re: Bowtie468's Extreme '68 BuildPage Looks great, what kit did you use for the windows. Sorry if you mentioned it previously in your thread and I missed it. How was the install and are you happy with the quality? Posted via Mobile Device __________________ Keith 66 Suburban Burb Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=751361 IG: bennett68c10

12-14-2012, 09:28 AM	#408
Bennett68C10 Registered User Join Date: Dec 2006 Location: Toms River, NJ Posts: 5,518	Re: Bowtie468's Extreme '68 BuildPage Thanks for the info Chris, I will look into them __________________ Keith 66 Suburban Burb Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=751361 IG: bennett68c10

12-14-2012, 03:20 PM	#409
thor Registered User Join Date: Apr 2008 Location: Redmond, WA Posts: 679	Re: Bowtie468's Extreme '68 BuildPage Is it too early for an overall shot??? Would be great to see it since you've added so much. __________________ 1972 Chevy Blazer CST.....Project: Polished Turd Last edited by thor; 12-14-2012 at 03:22 PM. Reason: added content

12-14-2012, 03:27 PM	#410
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Bowtie468's Extreme '68 BuildPage absolutely Gorgeous ! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

12-15-2012, 05:04 PM	#412
raull Registered User Join Date: Mar 2009 Location: miramar florida Posts: 1,232	Re: Bowtie468's Extreme '68 BuildPage ram jet set up looks sick bud !!!! and nice job on one piece windows !!!! __________________ check out my build thread 71 c/10 step side 5.3 twin turbo http://67-72chevytrucks.com/vboard/s...d.php?t=485320 raul

01-02-2013, 04:11 AM	#414
bk2life Account Suspended Join Date: Oct 2012 Location: phx, az Posts: 868	Re: Bowtie468's Extreme '68 BuildPage freakin killer build, i know you know this already though!!

01-10-2013, 02:16 AM	#418
Bowtie468 Senior Member Join Date: Jun 2002 Location: Cecilia, Louisiana Posts: 1,638	Re: Bowtie468's Extreme '68 BuildPage Well, since i cant seem to leave anything as is, i decided to gasket match the tpi plenum to the intake. While the runners are really nice as cast, this transition area on the plenum was a little rough for my likeing. I also removed the 3" tall spacers and the unit looks much nicer without them. Plus i surely wasnt cutting my hood. No pics yet without the spacers as i still have the unit blown apart. Attached Images __________________ Chris click here to see my buildpage http://67-72chevytrucks.com/vboard/s...d.php?t=394656 ---------------------------------- 1979 C10 Silverado Big10 SWB Factory 454/400 Cardinal Red/Santa Fe Tan (original paint) 1969 Camaro X44 LS swap 1968 C10 SWB Fleetside (SOLD) 468BBC MultiPort TPI / Dynamic EFI P4 Black/Black 1963 Nova SS convertible (SOLD) 194 I6/ PowerGlide

01-10-2013, 10:09 AM	#419
hgs_notes GEARHEAD Join Date: Aug 2003 Location: MN Posts: 6,125	Re: Bowtie468's Extreme '68 BuildPage Looks good. __________________ If no one knows what you're doing, they can't tell you you're doing it wrong HG's Dream Car Build - Shelby Cobra Kit Build your own adjustable track bar 71 Long Fleet C/10 72 Jimmy 4x4 (Junkyard Jimmy) HG's Plow Truck '78 K35 Dually Bigass Farm Truck HG's thread of miscellaneous stuff

01-14-2013, 07:29 PM	#420
superflysteiny Senior Member Join Date: Nov 2008 Location: orangevale ca Posts: 4,630	Re: Bowtie468's Extreme '68 BuildPage nice i like it __________________ Tootsie build T Shirts (Supporting Colon Cancer research) Tootsie- a truck for my mother Pops 72 Cheyenne Dropmember build 67 Second Chance project from hell

02-10-2013, 03:18 AM	#421
Texas Pugh Registered User Join Date: Jul 2012 Location: Midlothian, Texas Posts: 72	Re: Bowtie468's Extreme '68 BuildPage Awesome build. Great job. Gonna be a showstopper! Really nice!!

03-06-2013, 11:54 AM	#422
Bennett68C10 Registered User Join Date: Dec 2006 Location: Toms River, NJ Posts: 5,518	Re: Bowtie468's Extreme '68 BuildPage Any updates Chris __________________ Keith 66 Suburban Burb Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=751361 IG: bennett68c10



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.