slik ricks 67 short wide CST - Page 17 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

oldblue1968chevy · 01-15-2011, 06:54 PM

It really cleans things up under there (gear for PB)

Looks good, where'd all the dents come from

Where did you score all the stuff? Tilt etc??! Are you spraypainting stuff or real painting or what? How is it?

67chevy1series · 01-15-2011, 07:03 PM

this is rattle can jobs!lol the tilt was givin to me by my dad because he junked his 68 suburban and i needed a colum so there it was! well the colum comes from a van and i am actually not liking it very much! if i find a 70 72 tilt colum for like 100 bucks im going to buy it and sell my tilt for 100 lol

oldblue1968chevy · 01-15-2011, 07:14 PM

Whats wrong with it? I couldnt tell? Id find one and rebuild relube the insides.

I wanna build a truck from the frame up. Make the frame nice and pretty all the suspension nice and pretty, uh my rusty greasy frame bothers me...

Anyways..

67chevy1series · 01-15-2011, 07:17 PM

well it hangs too low , you know in the fire wall the end of the colum has to bumps on it and the bracket goes on those bumps well on my colum the bumps are like 4 inches farther down and if i pull the colum up it will stick to far in and the rod will not attach so that is what i dont like

67chevy1series · 01-15-2011, 08:13 PM

well i have just drilled the holes for my passenger side sun visor clip

67chevy1series · 02-06-2011, 02:47 PM

Quote:

Originally Posted by 67chevy1series

well it hangs too low , you know in the fire wall the end of the colum has to bumps on it and the bracket goes on those bumps well on my colum the bumps are like 4 inches farther down and if i pull the colum up it will stick to far in and the rod will not attach so that is what i dont like

heres the post eric......

67chevy1series · 02-06-2011, 05:15 PM

well to day i jacked her up and tightened more bolts.....it was my dads idea to leave the front suspension just barley all bolted up....he then called the alingnment shop and they said they didnt want to waste there time tightening all these bolts ...so now i have to do it no problem tho.

oldblue1968chevy · 01-15-2011, 10:01 PM

Haha I love the plain jane 67's! Cracks me up when I see a truck with no pass. visor

I wanna build a swb PLAIN JANE heater delete radio delete 250 I 3spd and all but I want it show quality with steelies/caps!

67chevy1series · 01-15-2011, 10:05 PM

hmm a heater delete that is a tuffy to find!

67chevy1series · 01-16-2011, 01:02 AM

well i have sent the money for a horn cup the cup that holds the horn cap and that cigarette lighter it is finished

oldblue1968chevy · 01-16-2011, 01:42 AM

Hey rick since your on a roll order me some parts too!

Pm me for my adress lol

67chevy1series · 01-16-2011, 01:47 AM

hey i got a stepside bed you pay shipping!

heeroyue2002 · 01-16-2011, 02:08 AM

what u gotta have for that bed/

oldblue1968chevy · 01-16-2011, 02:15 AM

wish you were closer my bud needs a step bed

67chevy1series · 01-16-2011, 02:27 AM

Quote:

Originally Posted by heeroyue2002

what u gotta have for that bed/

well 150 seem okay i have it in 5 chunks the sides,tailgate ,headgate,and the floor

Quote:

Originally Posted by oldblue1968chevy

wish you were closer my bud needs a step bed

i know i would be at your house bsing and motivating you alot ,and of course helping!

67chevy1series · 01-16-2011, 02:29 AM

~well i have an idea for my 67 air cleaner ,there is talk about 67 air cleaners not breathing enough air so i have come up with a way to have it breath better and not have to drill holes in it the diagram below shows what peices i am talkin about

sorry it was done by paint here is what im gonna do!~:
first get just the top peice of a 67 air cleaner
second get the bottom of a air cleaner from say kragens or jc witney some cheapo jobby
third get a air filter that works and install the filter top and bottom

the factory air cleaner is bigger in diameter then the aftermarket jobby so ther for there will be about and 1'' gap all the way around on the bottom of the air cleaner (the black ring on the air cleaner in the picture) were air can travel up and in as well as the snout of the aircleaner so this will look stock but will improve breathing of the air!

jbclassix · 01-16-2011, 12:00 PM

For some reason the opening credits from robotchicken come to mind

67chevy1series · 01-16-2011, 01:43 PM

I LOVE ROBOT CHICKEN!!!!!

67chevylongbed · 01-16-2011, 03:49 PM

Quote:

Originally Posted by jbclassix

For some reason the opening credits from robotchicken come to mind

mcbassin · 01-18-2011, 01:55 AM

The truck is looking great! I like the brake pedal mod. Need more pics.

67chevy1series · 01-18-2011, 03:18 AM

Quote:

Originally Posted by 67chevylongbed

Cool, hope you get them so you can get your motor going

me to!

Quote:

Originally Posted by mcbassin

The truck is looking great! I like the brake pedal mod. Need more pics.

i did a brake pedal mod? if you are taklin about the e brake cover then i will get more pics

69C-owner · 01-18-2011, 04:05 AM

grab all ur buddies, the bigger the better and have them stand on the hoist so it doesnt just start lifting itself off the ground when you start raising the boom on it

67chevy1series · 01-18-2011, 06:45 PM

that sounds like an idea

JasonBird · 01-18-2011, 07:39 PM

and a darn good one...

ohhhh! my first post as a Premium Member!! How lucky are you?!! lol

oldblue1968chevy · 01-18-2011, 10:31 PM

95% is Bs'ing lol

01-15-2011, 06:54 PM	#1
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: slik ricks 67 short wide CST It really cleans things up under there (gear for PB) Looks good, where'd all the dents come from Where did you score all the stuff? Tilt etc??! Are you spraypainting stuff or real painting or what? How is it? __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

01-15-2011, 07:03 PM	#2
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: slik ricks 67 short wide CST this is rattle can jobs!lol the tilt was givin to me by my dad because he junked his 68 suburban and i needed a colum so there it was! well the colum comes from a van and i am actually not liking it very much! if i find a 70 72 tilt colum for like 100 bucks im going to buy it and sell my tilt for 100 lol

01-15-2011, 07:14 PM	#3
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: slik ricks 67 short wide CST Whats wrong with it? I couldnt tell? Id find one and rebuild relube the insides. I wanna build a truck from the frame up. Make the frame nice and pretty all the suspension nice and pretty, uh my rusty greasy frame bothers me... Anyways.. __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

01-15-2011, 07:17 PM	#4
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: slik ricks 67 short wide CST well it hangs too low , you know in the fire wall the end of the colum has to bumps on it and the bracket goes on those bumps well on my colum the bumps are like 4 inches farther down and if i pull the colum up it will stick to far in and the rod will not attach so that is what i dont like

01-15-2011, 08:13 PM	#5
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: slik ricks 67 short wide CST well i have just drilled the holes for my passenger side sun visor clip Last edited by 67chevy1series; 01-15-2011 at 08:13 PM.

02-06-2011, 05:15 PM	#7
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: slik ricks 67 short wide CST well to day i jacked her up and tightened more bolts.....it was my dads idea to leave the front suspension just barley all bolted up....he then called the alingnment shop and they said they didnt want to waste there time tightening all these bolts ...so now i have to do it no problem tho.

01-15-2011, 10:01 PM	#8
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: slik ricks 67 short wide CST Haha I love the plain jane 67's! Cracks me up when I see a truck with no pass. visor I wanna build a swb PLAIN JANE heater delete radio delete 250 I 3spd and all but I want it show quality with steelies/caps! __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

01-15-2011, 10:05 PM	#9
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: slik ricks 67 short wide CST hmm a heater delete that is a tuffy to find!

01-16-2011, 01:02 AM	#10
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: slik ricks 67 short wide CST well i have sent the money for a horn cup the cup that holds the horn cap and that cigarette lighter it is finished

01-16-2011, 01:42 AM	#11
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: slik ricks 67 short wide CST Hey rick since your on a roll order me some parts too! Pm me for my adress lol __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

01-16-2011, 01:47 AM	#12
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: slik ricks 67 short wide CST hey i got a stepside bed you pay shipping!

01-16-2011, 02:08 AM	#13
heeroyue2002 fat old dude Join Date: Feb 2010 Location: fresno, california Posts: 1,424	Re: slik ricks 67 short wide CST what u gotta have for that bed/ __________________ 1972 c-10 shortbed 350/400 build thread http://67-72chevytrucks.com/vboard/s...d.php?t=389157 1968 workhorse http://67-72chevytrucks.com/vboard/s...d.php?t=446216 Accepting part donations

01-16-2011, 02:15 AM	#14
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: slik ricks 67 short wide CST wish you were closer my bud needs a step bed __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

01-16-2011, 02:29 AM	#16
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: slik ricks 67 short wide CST ~well i have an idea for my 67 air cleaner ,there is talk about 67 air cleaners not breathing enough air so i have come up with a way to have it breath better and not have to drill holes in it the diagram below shows what peices i am talkin about sorry it was done by paint here is what im gonna do!~: first get just the top peice of a 67 air cleaner second get the bottom of a air cleaner from say kragens or jc witney some cheapo jobby third get a air filter that works and install the filter top and bottom the factory air cleaner is bigger in diameter then the aftermarket jobby so ther for there will be about and 1'' gap all the way around on the bottom of the air cleaner (the black ring on the air cleaner in the picture) were air can travel up and in as well as the snout of the aircleaner so this will look stock but will improve breathing of the air! Last edited by 67chevy1series; 01-16-2011 at 02:33 AM.

01-16-2011, 12:00 PM	#17
jbclassix Junk Yartist Join Date: Jul 2009 Location: Greeley, CO Posts: 2,203	Re: slik ricks 67 short wide CST For some reason the opening credits from robotchicken come to mind __________________ -Jeremy YOU ONLY FAIL IF YOU STOP TRYING 70 Crew Cab Build Link 70 GMC Suburban 4X4 build thread 95 Yukon Daily Driver Rebuilding an NP205



Register or Log In To remove these advertisements.

01-16-2011, 01:43 PM	#18
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: slik ricks 67 short wide CST I LOVE ROBOT CHICKEN!!!!!

01-18-2011, 01:55 AM	#20
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: slik ricks 67 short wide CST The truck is looking great! I like the brake pedal mod. Need more pics. __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

01-18-2011, 04:05 AM	#22
69C-owner Registered User Join Date: Dec 2010 Location: Apison Tn Posts: 490	Re: slik ricks 67 short wide CST grab all ur buddies, the bigger the better and have them stand on the hoist so it doesnt just start lifting itself off the ground when you start raising the boom on it __________________ http://67-72chevytrucks.com/vboard/s...d.php?t=43855069 LWB Fleet 1994 Buick Roadmaster 1994 GMC Sonoma

01-18-2011, 06:45 PM	#23
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: slik ricks 67 short wide CST that sounds like an idea

01-18-2011, 07:39 PM	#24
JasonBird '67 C-10 LWB Driver Join Date: Dec 2010 Location: Andover, Kansas Posts: 380	Re: slik ricks 67 short wide CST and a darn good one... ohhhh! my first post as a Premium Member!! How lucky are you?!! lol __________________ '67 C-10 LWB - My Build Thread '67 C-20 LWB - My Donor/ Parts truck - SOLD! '92 GMC SAFARI VAN - My Parts Go Getter '06 KIA SPORTAGE EX - My Commuter "All of this crap better make a truck!" - my wife Sue. Proud U.S.M.C. Dad! Last edited by JasonBird; 01-18-2011 at 07:41 PM. Reason: none really...

01-18-2011, 10:31 PM	#25
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: slik ricks 67 short wide CST 95% is Bs'ing lol __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

Register or Log In To remove these advertisements.