1965/73 Cheap Build Up - Page 17 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Strodder · 07-22-2009, 02:44 PM

Quote:

Originally Posted by Deenice21

well its only fair i contribute something. great build

btw i meant your truck

Holly crap. Those are the nicest A$$'s I ever seen.

Strodder · 07-22-2009, 02:46 PM

Quote:

Originally Posted by joe231

sounds good, but you will have to feed me, your new daughter in law, your 1 new teenage grandson and your other soon to be teenage grandson

I changed my mind.

daverod · 07-22-2009, 05:07 PM

Quote:

Originally Posted by MacAttack

No......?......

Mac.

I don't understand the ? part.

MacAttack · 07-22-2009, 05:53 PM

Quote:

Originally Posted by daverod

I don't understand the ? part.

That’s okay - neither did I.

By the way - the main hazard (other than having to feed her) with dating a female of those proportions is losing your truck keys, forever, when she sets on them by accident.

Mac.

Alan's Classic · 07-22-2009, 11:39 PM

Quote:

Originally Posted by Strodder

That pluming next to the sink is for peeing. It goes to a septic tank, and I wash the pee down with the spout from the sink. Cool huh?

Does you wife give you a hard time saying if you can hit that little cup why can't you hit the toilet?

4dranch · 07-23-2009, 07:00 AM

Quote:

Originally Posted by MacAttack

That’s okay - neither did I.

By the way - the main hazard (other than having to feed her) with dating a female of those proportions is losing your truck keys, forever, when she sets on them by accident.

Mac.

I know what you meen Mac......

ol Curt · 07-23-2009, 07:05 AM

Quote:

Originally Posted by Deenice21

How could i forget one??

Nice deuces!!

jason65 · 07-23-2009, 07:32 AM

What are you going use to scrape of the undercoating on the 36 lark? I used a chisel and some old straight screwdrivers.

jgh64pkup · 07-23-2009, 11:10 AM

jason always shows up to straighten us out
so lets go to the beach

Strodder · 07-23-2009, 11:13 AM

Quote:

Originally Posted by Alan's Classic

Does you wife give you a hard time saying if you can hit that little cup why can't you hit the toilet?

I hit the toilet OK because I have short legs, and the middle one is long.

jgh64pkup · 07-23-2009, 11:14 AM

Strodder · 07-23-2009, 11:20 AM

Quote:

Originally Posted by jason65

What are you going use to scrape of the undercoating on the 36 lark? I used a chisel and some old straight screwdrivers.

The parts of underneath the body that was soaked with oil just scraped off. He just wants a fresh coat of undercoat to clean it up. But if I had to scrape it off Eastwood has this. http://www.eastwood.com/under-gone-u...17-oz-net.html
Or last time I took off underwear............I mean undercoating I heated it with a torch, and it scraped right off.
See what thread jacking does to your brain.

MacAttack · 07-23-2009, 11:48 AM

Quote:

Originally Posted by Strodder

I hit the toilet OK because I have short legs, and the middle one is long.

jason65 · 07-23-2009, 12:24 PM

4dranch · 07-23-2009, 01:08 PM

May be your best yet Mac..........

joe231 · 07-23-2009, 01:21 PM

Quote:

Originally Posted by MacAttack

Exrackry!!!

Strodder · 07-23-2009, 11:22 PM

You guys are killing me.

Alan's Classic · 07-23-2009, 11:23 PM

Quote:

Originally Posted by MacAttack

Strodder · 07-25-2009, 10:44 AM

Got most of the Larks frame cleaned down to bare metal. My arms are killing me. Man I love my lift. It was a big help. I used a 4 1/2" grinder with a twisted wire wheel.

Before

After

Can't wait to get this frame painted so I can get my truck on the lift next. Sooooooon

Alan's Classic · 07-25-2009, 10:49 AM

Nice work Dennis. I'm wanting a 2 post lift still. My ceiling is exactly 12' maybe 1/2" less with sheetrock. Do you know the exact height of your lift?

joe231 · 07-25-2009, 04:57 PM

are you using POR on the Lark?

Strodder · 07-25-2009, 09:59 PM

Quote:

Originally Posted by Alan's Classic

Nice work Dennis. I'm wanting a 2 post lift still. My ceiling is exactly 12' maybe 1/2" less with sheetrock. Do you know the exact height of your lift?

I'll have to measure it tomorrow

Strodder · 07-25-2009, 10:00 PM

Quote:

Originally Posted by joe231

are you using POR on the Lark?

Yes the stuff is awesome

jason65 · 07-25-2009, 10:06 PM

Looks good Dennis. After talking to you I'm looking into 12' walls. A lift may be a few years off but it's good to plan for the future.

daverod · 07-25-2009, 11:30 PM

Quote:

Originally Posted by jason65

Looks good Dennis. After talking to you I'm looking into 12' walls. A lift may be a few years off but it's good to plan for the future.

Depending on how you build it you could go with 10' walls and a vaulted truss. On my barn I stuck the foundation wall out of the ground 2' then a 8' wall. Then I vaulted the ceiling. I'm pretty sure just the peak has to be 12'. I'm putting one in my next house. My dream house is going to have one in the floor that goes down to a basement under my garage.

Like a bat cave. Full of trucks

07-23-2009, 07:32 AM	#408
jason65 Registerd User Join Date: Sep 2008 Location: Oklahoma Posts: 2,118	Re: 1965/73 Cheap Build Up What are you going use to scrape of the undercoating on the 36 lark? I used a chisel and some old straight screwdrivers.

07-23-2009, 11:10 AM	#409
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: 1965/73 Cheap Build Up jason always shows up to straighten us out so lets go to the beach __________________ Gage 1967 C10 Shortbed Stepside

07-23-2009, 11:14 AM	#411
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: 1965/73 Cheap Build Up __________________ Gage 1967 C10 Shortbed Stepside

07-23-2009, 12:24 PM	#414
jason65 Registerd User Join Date: Sep 2008 Location: Oklahoma Posts: 2,118	Re: 1965/73 Cheap Build Up

07-23-2009, 01:08 PM	#415
4dranch Shloooooong bed member #2 Join Date: Aug 2008 Location: Millington Tn. Posts: 1,864	Re: 1965/73 Cheap Build Up May be your best yet Mac.......... __________________ *David,* Daughters 66 truck: http://67-72chevytrucks.com/vboard/s...d.php?t=484601 Learning to drive a 3 on the tree: http://www.youtube.com/watch?v=CcCMvRgBo1Q

07-23-2009, 11:22 PM	#417
Strodder Daring to be Different Join Date: Aug 2008 Location: Hesperia, Ca Posts: 4,499	Re: 1965/73 Cheap Build Up You guys are killing me. __________________ *Dennis* Check out my 65/73 Cheap Build Thread. http://www.67-72chevytrucks.com/vboa...d.php?t=327644 *KUSTOM RIDES* FACE BOOK PAGE: https://www.facebook.com/groups/291198124258863/ 1965 C-10 Short Bed 350/700r4 2012 Silverado 1500 Crew Cab 2016 Honda Accord w/ 18" rims 2007 Honda Goldwing Trike w/ NAVI 2001 Yamaha Roadstar Indian look alike "Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting "...WOW!...what an amazing ride!" Live Life Passionately!!! [/COLOR] *I AM WE TODD IT, I AM SOFA KING WE TODD IT*

07-25-2009, 10:44 AM	#419
Strodder Daring to be Different Join Date: Aug 2008 Location: Hesperia, Ca Posts: 4,499	Re: 1965/73 Cheap Build Up Got most of the Larks frame cleaned down to bare metal. My arms are killing me. Man I love my lift. It was a big help. I used a 4 1/2" grinder with a twisted wire wheel. Before After Can't wait to get this frame painted so I can get my truck on the lift next. Sooooooon __________________ *Dennis* Check out my 65/73 Cheap Build Thread. http://www.67-72chevytrucks.com/vboa...d.php?t=327644 *KUSTOM RIDES* FACE BOOK PAGE: https://www.facebook.com/groups/291198124258863/ 1965 C-10 Short Bed 350/700r4 2012 Silverado 1500 Crew Cab 2016 Honda Accord w/ 18" rims 2007 Honda Goldwing Trike w/ NAVI 2001 Yamaha Roadstar Indian look alike "Life's journey is not to arrive at the grave safely in a well preserved body, but rather to skid in sideways, totally worn out, shouting "...WOW!...what an amazing ride!" Live Life Passionately!!! [/COLOR] *I AM WE TODD IT, I AM SOFA KING WE TODD IT*

07-25-2009, 10:49 AM	#420
Alan's Classic 1 thing at a time is progress. Join Date: Jun 2007 Location: Ball Ground GA Posts: 5,511	Re: 1965/73 Cheap Build Up Nice work Dennis. I'm wanting a 2 post lift still. My ceiling is exactly 12' maybe 1/2" less with sheetrock. Do you know the exact height of your lift? __________________ Alan Philippians 2:14-16 Alan's Classic Facebook page. North Georgia Group Project 1965 Vitamin C-10 1995 GMC Sierra K1500 The "Wrecker"

07-25-2009, 04:57 PM	#421
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: 1965/73 Cheap Build Up are you using POR on the Lark? __________________ *CHEVY ONLY*

07-25-2009, 10:06 PM	#424
jason65 Registerd User Join Date: Sep 2008 Location: Oklahoma Posts: 2,118	Re: 1965/73 Cheap Build Up Looks good Dennis. After talking to you I'm looking into 12' walls. A lift may be a few years off but it's good to plan for the future.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.