OR 100's of misc parts from the last 6 trucks parted out - Page 17 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

jwodahl · 07-10-2013, 01:07 PM

do you happen to have any 292 engine stand/motor mount setups? trying to change from a 250...

jonny..2008 · 07-12-2013, 10:01 PM

a rear end for a coil spring 1969 c20?

**tll74** · 07-13-2013, 12:13 PM

Quote:

Originally Posted by jonny..2008

a rear end for a coil spring 1969 c20?

Sure no problem. Dana 60 or HO72? I have both. What ratio? Thanks, Tom

jonny..2008 · 07-13-2013, 12:24 PM

Quote:

Originally Posted by tll74

Sure no problem. Dana 60 or HO72? I have both. What ratio? Thanks, Tom

this rear end business is my weak point.

do both rear ends have 8 lugs?

if so, i guess i should want the dana 60.

as for ratio of course i want the best one, i dont do any towing or heavy hauling or hard launching, just normal driving on the street.

now that i have taken your time, i also need the bad new$.
ill come get it if.........

(and any interest in the one thats coming out? its ok but leaky and im just afraid to start buying parts for it and end up too deep. the reason for the swap is its my daily and not sure i could get that thing right with my limited resources and time)

**chewysask** · 07-13-2013, 03:53 PM

Do you still have the Custom door emblems?

eseaton · 07-13-2013, 10:18 PM

Do you still have any of the gear boxes for sale. Are they power steering or manual?
Posted via Mobile Device

jonny..2008 · 07-14-2013, 12:13 PM

pm sent.

**chewysask** · 07-14-2013, 12:20 PM

In pic # 3 am i mistaken the custom emblem that has three studs that mounts above the door handle. thanks Carey

eseaton · 07-14-2013, 12:57 PM

I have a 67 2wd. With power steering. Pm me on payment info and such please.
Thanks
Eric
Posted via Mobile Device

**tll74** · 07-17-2013, 12:08 PM

Quote:

Originally Posted by chewysask

In pic # 3 am i mistaken the custom emblem that has three studs that mounts above the door handle. thanks Carey

My bad...I for some reason wasn't awake yet when I posted that. YES. I have the emblem.

Quote:

Originally Posted by eseaton

I have a 67 2wd. With power steering. Pm me on payment info and such please.
Thanks
Eric
Posted via Mobile Device

PM coming

flyingcubby · 07-17-2013, 01:12 PM

Curious if by chance you have a front drive shaft for 71 Blazer....Thanks

**chewysask** · 07-17-2013, 09:28 PM

Do you have any pics?Do you have 2 pair? Thanks Carey

**tll74** · 07-27-2013, 12:04 PM

Quote:

Originally Posted by flyingcubby

Curious if by chance you have a front drive shaft for 71 Blazer....Thanks

Yes, 125.00 plus shipping. Very nice condition.

Quote:

Originally Posted by chewysask

Do you have any pics?Do you have 2 pair? Thanks Carey

PM sent

69Rumbler · 07-27-2013, 12:09 PM

Do you have any rubber bumper guards ?
Posted via Mobile Device

bollybib · 07-27-2013, 09:43 PM

Do you have an intact fan shroud for a small block with AC ? Thanks.

bluek5 · 07-27-2013, 10:04 PM

Pic 3 67-68 2wd LH exhaust manifold original GM nice condition 65.00
Do you still have this manifold for sale? If so how much shipped to 84043?
Thanks, Paul

**tll74** · 07-28-2013, 03:22 AM

Quote:

Originally Posted by 69Rumbler

Do you have any rubber bumper guards ?
Posted via Mobile Device

Are you looking for the original guards with the rubber impact strip?. If so yes.

Quote:

Originally Posted by bollybib

Do you have an intact fan shroud for a small block with AC ? Thanks.

Yes, 45.00 plus shipping

Quote:

Originally Posted by bluek5

Pic 3 67-68 2wd LH exhaust manifold original GM nice condition 65.00
Do you still have this manifold for sale? If so how much shipped to 84043?
Thanks, Paul

Yes, 65.00 plus 19.00 shipping

Thanks, Tom

69Rumbler · 07-28-2013, 12:59 PM

Yea that's what I'm looking for how much ?
Posted via Mobile Device

bluek5 · 07-29-2013, 01:13 AM

I asked earlier about a manifold. Is it flat where the pipe hooks up for a heat riser or is it beveled for a doughnut/gasket? If it is not flat I will take it.
Thanks, Paul

**chewysask** · 07-29-2013, 08:55 AM

Hi Tom did you take any pics of the Custom door emblems?Thanks .

**19702wdc10** · 07-29-2013, 05:43 PM

Do you have any straight 6 PS brackets
Thanks
Joe
Posted via Mobile Device

**tll74** · 08-01-2013, 02:07 AM

Quote:

Originally Posted by 69Rumbler

Yea that's what I'm looking for how much ?
Posted via Mobile Device

I will dig them out and get pics & price after after I see the condition.

Quote:

Originally Posted by bluek5

I asked earlier about a manifold. Is it flat where the pipe hooks up for a heat riser or is it beveled for a doughnut/gasket? If it is not flat I will take it.
Thanks, Paul

Paul, PM returned

Quote:

Originally Posted by chewysask

Hi Tom did you take any pics of the Custom door emblems?Thanks .

Yes posting them next.

Quote:

Originally Posted by 19702wdc10

Do you have any straight 6 PS brackets
Thanks
Joe
Posted via Mobile Device

Sorry none a this time. Hard to find!

Thanks, Tom

**tll74** · 08-01-2013, 02:13 AM

Just tried to post the emblem pics and for some reason it won't work. Nothing changed on my end?! I heard from another member that there is problem here on posting pics. Anybody know why?

chevyman91 · 08-03-2013, 09:16 PM

Do you still have the Chevy headlight bezels
Posted via Mobile Device

JWSmith · 08-04-2013, 09:41 PM

I'm looking for a dash vent for my 70. I don't care about color.
Posted via Mobile Device

07-10-2013, 01:07 PM	#1
jwodahl Registered User Join Date: Jun 2012 Location: crosby, tx Posts: 114	Re: 100's of misc parts from the last 6 trucks parted out do you happen to have any 292 engine stand/motor mount setups? trying to change from a 250...

07-12-2013, 10:01 PM	#2
jonny..2008 Registered User Join Date: Sep 2012 Location: oregon coast Posts: 248	Re: 100's of misc parts from the last 6 trucks parted out a rear end for a coil spring 1969 c20? __________________ i love every machine. even the ones i hate. Current project (1959) fifty niner gmc fleetside: http://67-72chevytrucks.com/vboard/s...70#post6514670 MY daily driver truck thread : http://67-72chevytrucks.com/vboard/s...d.php?t=544460

07-13-2013, 03:53 PM	#5
chewysask Active Member Join Date: Apr 2013 Location: Saskatoon, Sask Posts: 193	Re: 100's of misc parts from the last 6 trucks parted out Do you still have the Custom door emblems?

07-13-2013, 10:18 PM	#6
eseaton Registered User Join Date: Jul 2008 Location: Amarillo, TX Posts: 190	Re: 100's of misc parts from the last 6 trucks parted out Do you still have any of the gear boxes for sale. Are they power steering or manual? Posted via Mobile Device __________________ 67 GMC SW 383 stroker/TH350 w/ 4.56 gears - under construction 04 GMC 1/2ton daily 07 GMC Acadia wifes daily

07-14-2013, 12:13 PM	#7
jonny..2008 Registered User Join Date: Sep 2012 Location: oregon coast Posts: 248	Re: 100's of misc parts from the last 6 trucks parted out pm sent. __________________ i love every machine. even the ones i hate. Current project (1959) fifty niner gmc fleetside: http://67-72chevytrucks.com/vboard/s...70#post6514670 MY daily driver truck thread : http://67-72chevytrucks.com/vboard/s...d.php?t=544460

07-14-2013, 12:20 PM	#8
chewysask Active Member Join Date: Apr 2013 Location: Saskatoon, Sask Posts: 193	Re: 100's of misc parts from the last 6 trucks parted out In pic # 3 am i mistaken the custom emblem that has three studs that mounts above the door handle. thanks Carey

07-14-2013, 12:57 PM	#9
eseaton Registered User Join Date: Jul 2008 Location: Amarillo, TX Posts: 190	Re: 100's of misc parts from the last 6 trucks parted out I have a 67 2wd. With power steering. Pm me on payment info and such please. Thanks Eric Posted via Mobile Device __________________ 67 GMC SW 383 stroker/TH350 w/ 4.56 gears - under construction 04 GMC 1/2ton daily 07 GMC Acadia wifes daily

07-17-2013, 01:12 PM	#11
flyingcubby Registered User Join Date: Jul 2013 Location: Converse, Texas Posts: 102	Re: 100's of misc parts from the last 6 trucks parted out Curious if by chance you have a front drive shaft for 71 Blazer....Thanks

07-17-2013, 09:28 PM	#12
chewysask Active Member Join Date: Apr 2013 Location: Saskatoon, Sask Posts: 193	Re: 100's of misc parts from the last 6 trucks parted out Do you have any pics?Do you have 2 pair? Thanks Carey

07-27-2013, 12:09 PM	#14
69Rumbler Registered User Join Date: Jan 2013 Location: Los Angeles Posts: 903	Re: 100's of misc parts from the last 6 trucks parted out Do you have any rubber bumper guards ? Posted via Mobile Device __________________ 1969 C20 CUSTOM "RUMBLEr"

07-27-2013, 09:43 PM	#15
bollybib Registered User Join Date: Nov 2010 Location: Carlsbad, CA Posts: 1,584	Re: 100's of misc parts from the last 6 trucks parted out Do you have an intact fan shroud for a small block with AC ? Thanks. __________________ - Jim - My Daily Driver is a 1969 Chevrolet Custom/20 Fleetside 350/TH400/Eaton H052 4.10 and its Project thread is here http://67-72chevytrucks.com/vboard/s...d.php?t=456911

07-27-2013, 10:04 PM	#16
bluek5 Registered User Join Date: Apr 2012 Location: Lehi,Utah Posts: 1,330	Re: 100's of misc parts from the last 6 trucks parted out Pic 3 67-68 2wd LH exhaust manifold original GM nice condition 65.00 Do you still have this manifold for sale? If so how much shipped to 84043? Thanks, Paul

07-28-2013, 12:59 PM	#18
69Rumbler Registered User Join Date: Jan 2013 Location: Los Angeles Posts: 903	Re: 100's of misc parts from the last 6 trucks parted out Yea that's what I'm looking for how much ? Posted via Mobile Device __________________ 1969 C20 CUSTOM "RUMBLEr"

07-29-2013, 01:13 AM	#19
bluek5 Registered User Join Date: Apr 2012 Location: Lehi,Utah Posts: 1,330	Re: 100's of misc parts from the last 6 trucks parted out I asked earlier about a manifold. Is it flat where the pipe hooks up for a heat riser or is it beveled for a doughnut/gasket? If it is not flat I will take it. Thanks, Paul

07-29-2013, 08:55 AM	#20
chewysask Active Member Join Date: Apr 2013 Location: Saskatoon, Sask Posts: 193	Re: 100's of misc parts from the last 6 trucks parted out Hi Tom did you take any pics of the Custom door emblems?Thanks .



Register or Log In To remove these advertisements.

07-29-2013, 05:43 PM	#21
19702wdc10 Active Member Join Date: Jun 2013 Location: Locust Grove, Virginia Posts: 101	Re: 100's of misc parts from the last 6 trucks parted out Do you have any straight 6 PS brackets Thanks Joe Posted via Mobile Device

08-01-2013, 02:13 AM	#23
tll74 "Junkyard Dog" Join Date: Jan 2008 Location: Springfield Oregon Posts: 2,527	Re: 100's of misc parts from the last 6 trucks parted out Just tried to post the emblem pics and for some reason it won't work. Nothing changed on my end?! I heard from another member that there is problem here on posting pics. Anybody know why? __________________ 72 C-10 Cheyenne Super LWB, Vortec 427,TH700, 3.73 posi, tach, tilt, AM-FM,Frame off in process. http://s289.photobucket.com/albums/l...t=7eae161e.pbw 88 Monte Carlo SS bought new only 10k miles. 73 Chevelle SS 454 had since high school. 74 Camaro Z28 350 AT numbers matching, Black on Black. 73 El Camino SS 350 4sp. 70 Chevelle SS 396 4sp, number matching with LS6 454 69 Chevy C30 Car Hauler 86 K20 383 4sp 4" lift frame off restoration. http://s289.photobucket.com/albums/l...t=1b1082d3.pbw

08-03-2013, 09:16 PM	#24
chevyman91 Registered User Join Date: Dec 2012 Location: Saginaw Michigan Posts: 57	Re: 100's of misc parts from the last 6 trucks parted out Do you still have the Chevy headlight bezels Posted via Mobile Device

08-04-2013, 09:41 PM	#25
JWSmith Registered User Join Date: May 2013 Location: Godfrey, IL Posts: 220	Re: 100's of misc parts from the last 6 trucks parted out I'm looking for a dash vent for my 70. I don't care about color. Posted via Mobile Device

Register or Log In To remove these advertisements.