Project Lemon Drop: anything but stock! - Page 17 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

copywritten · 05-24-2008, 04:29 PM

Quote:

Originally Posted by randomhero472

Im a taller guy (6'3") and ended up selling my seats from an 06 truck, they just felt way to big in that cab, but they are damn comfy

Thats what I am talkin about. I am all about comfy! I was getting ready to order a new tilt column, but now I am gonna wait till I get those seats in to see if I need a shorter one.

jugernot · 06-05-2008, 05:11 PM

I'm taking a break from the wiring, since Kevin finished welding up my coverted blazer gas filler tube and adding a bit to my blazer tank. I painted, installed and connected all the fuel and vent tubes. It turned out really nice. I got the idea for the filler tube from Livrat another member and modified it a little.

jugernot · 06-05-2008, 05:13 PM

There are some more pics with the tubes attached

Rokcrln · 06-05-2008, 05:23 PM

Dat looks puurdy

Kevin
LFD Inc.

pcorriveau951 · 06-09-2008, 12:26 AM

Jugernot, truck is looking great, i was just playing with my truck this weekend trying to plan out the wiring and thought about puting the fuse block in the kick panel vent, then saw you did it, how funny. but i have a few questions for you, how are you planning on routing the wires from the fuse panel to the engine, headlight section? in plain getting all wires to outside the cab? did you still use the painless wire disconnect the normally goes thru the firewall?
Do you happen to have a picture of the the fuse panel installed? if your willing to share if not i understand, i have a couple of secerts that i want to keep on my truck as well until its done.

Thanks,
Phil

jugernot · 06-09-2008, 09:52 PM

Quote:

Originally Posted by pcorriveau951

Jugernot, truck is looking great, i was just playing with my truck this weekend trying to plan out the wiring and thought about puting the fuse block in the kick panel vent, then saw you did it, how funny. but i have a few questions for you, how are you planning on routing the wires from the fuse panel to the engine, headlight section? in plain getting all wires to outside the cab? did you still use the painless wire disconnect the normally goes thru the firewall?
Do you happen to have a picture of the the fuse panel installed? if your willing to share if not i understand, i have a couple of secerts that i want to keep on my truck as well until its done.

Thanks,
Phil

I used an 18 curcuit universal non GM column ingition harness from painless. (pictured below). it does not have the firewall connector like the OEM style harness. its all one piece.

If you are going to put your harness into the vent, make sure that you have the turn signal flasher fuses install to check fitment ans accessiblity.

As for the wires the go into the engine compartment, Kevin put a hole through the kick panel. I do not have a picture of it but it is oposite the kick panel vent opening some where around the area shown by yellow in the picture below.

I have no problems sharing, in fact a couple of memebers have used our idea for the gas filler door.

I hope this helps you out.

jugernot · 06-09-2008, 09:58 PM

pcorriveau951,

Just another thought, you could probable also put the harness through this area, but of course on the drivers side.

pcorriveau951 · 06-09-2008, 10:41 PM

thank you for sharing, im trying to decide which way i want to go, i hate the look of wires im trying to figure a way to get it all done with very minimal amounts of wires being seen anywhere in the truck, going to be alot of work but i think it will be worth it.

crey · 12-02-2008, 01:42 AM

Any updates on this build guys?

jugernot · 12-04-2008, 12:43 AM

Sorry the only update I have is that I had a vistor today, who said my paint was to loud and gave me a ticket.....................

**Hart_Rod** · 12-04-2008, 12:57 AM

Quote:

Originally Posted by jugernot

Sorry the only update I have is that I had a vistor today, who said my paint was to loud and gave me a ticket.....................

Rokcrln · 12-04-2008, 01:27 AM

Dude I think that dam Cop parked on your Smart car

So is that the new daily commuter?

Kevin
LFD Inc.

jugernot · 12-04-2008, 12:38 PM

Quote:

Originally Posted by Rokcrln

Dude I think that dam Cop parked on your Smart car

So is that the new daily commuter?

Kevin
LFD Inc.

I wish, just show and tell as the little one's school

paintpyro · 12-04-2008, 02:50 PM

I didn't see that paint option when I got my Magnum lol

drag_72 · 01-20-2009, 10:49 AM

jesse james the bike builder once said : "international color for scared is yellow" lol just a thought but nice truck man lol

jugernot · 01-22-2009, 06:20 PM

Okay, Well I'm trying to light the inspiration fire and motivated myself to get to work on Lemon Drop. So I finished installing by March Performance Serpentine Belt system. After three trips to Napa I found the proper belt size, which was a couple of inches less that what the instruction stated.

I also used a piece of 3/8 inch brake line to fad up a fuel line from the carb to the pump. I will be using a piece of stainless steel tube to replace it (more bling). I may have an issued with the routing of the lower radiator hose, but since I plan on using electric fans it may not be a problem.

I think I will work on the AC/Heater hoses next.. I can’t decide if I want to use steel braided to black. I know the steel braided would look great, but $$$ has been a little hard to find.

I have not inspired myself enough to finish the wiring thought.

my67chevytruck · 01-22-2009, 07:02 PM

looking good. keep chugging along.

FRENCHBLUE72 · 01-22-2009, 07:50 PM

I say use black hoses and paint the clamps a satin black..

jugernot · 01-22-2009, 11:54 PM

Quote:

Originally Posted by FRENCHBLUE72

I say use black hoses and paint the clamps a satin black..

I was thinking black hoses and polished clamps

VA72C10 · 01-23-2009, 01:19 AM

It's come a long way.....can't wait to see it finished up and on the road...do you have a target date?

jugernot · 01-23-2009, 02:31 PM

Quote:

Originally Posted by VA72C10

It's come a long way.....can't wait to see it finished up and on the road...do you have a target date?

I'm shooting for my daughter's high school graduation...................She'll be 5 in March.

I would like to get the engine running by summer, this summer.

jugernot · 01-28-2009, 12:52 AM

Okay, I spent about 2 hours trying to figure out what fittings I needed for the AC Heater lines. Then compared the priced with a braided hose and rubber hose. The braided kit would total $600. The rubber hose kit would total $350. This is using stainless fittings from www.gottoshow.com. So because of the cost I will probably go with the rubber hose.

Anyone know of a place to get a show stuff cheaper?

hotrodhomi · 01-28-2009, 02:35 AM

Quote:

Originally Posted by jugernot

Okay, I spent about 2 hours trying to figure out what fittings I needed for the AC Heater lines. Then compared the priced with a braided hose and rubber hose. The braided kit would total $600. The rubber hose kit would total $350. This is using stainless fittings from www.gottoshow.com. So because of the cost I will probably go with the rubber hose.

Anyone know of a place to get a show stuff cheaper?

You might be able to get the hose made cheaper at the Parker fitting store in Sac. I think its called Sac. Hose and fittings. it right off the Causeway.

jugernot · 01-28-2009, 09:05 PM

Quote:

Originally Posted by hotrodhomi

You might be able to get the hose made cheaper at the Parker fitting store in Sac. I think its called Sac. Hose and fittings. it right off the Causeway.

I did a quick search, but could not find anything about that business. Anyone got any info on this company?

smashingchuck · 01-31-2009, 08:03 PM

Very slick build.

Mine isn't nearly as far along as yours, but I never thought of how much hoses were going to cost for the vintage air system on my truck.... add it to the list $$$

06-05-2008, 05:11 PM	#402
jugernot Life, Be In It..... Join Date: Oct 2003 Location: Novato, California Posts: 1,498	Re: Project Lemon Drop: anything but stock! I'm taking a break from the wiring, since Kevin finished welding up my coverted blazer gas filler tube and adding a bit to my blazer tank. I painted, installed and connected all the fuel and vent tubes. It turned out really nice. I got the idea for the filler tube from Livrat another member and modified it a little. Attached Images __________________ Project Name: LEMON DROP. Reconstruction started "December 2000". Projected completion date "Who knows" http://67-72chevytrucks.com/vboard/s...d.php?t=200082 Last edited by jugernot; 06-05-2008 at 05:15 PM.

06-05-2008, 05:13 PM	#403
jugernot Life, Be In It..... Join Date: Oct 2003 Location: Novato, California Posts: 1,498	Re: Project Lemon Drop: anything but stock! There are some more pics with the tubes attached Attached Images __________________ Project Name: LEMON DROP. Reconstruction started "December 2000". Projected completion date "Who knows" http://67-72chevytrucks.com/vboard/s...d.php?t=200082

06-05-2008, 05:23 PM	#404
Rokcrln Senior Member Join Date: Jul 2005 Location: Winters Ca. 95694 Posts: 4,843	Re: Project Lemon Drop: anything but stock! Dat looks puurdy Kevin LFD Inc.

06-09-2008, 12:26 AM	#405
pcorriveau951 Registered User Join Date: Nov 2007 Location: riverside, ca Posts: 147	Re: Project Lemon Drop: anything but stock! Jugernot, truck is looking great, i was just playing with my truck this weekend trying to plan out the wiring and thought about puting the fuse block in the kick panel vent, then saw you did it, how funny. but i have a few questions for you, how are you planning on routing the wires from the fuse panel to the engine, headlight section? in plain getting all wires to outside the cab? did you still use the painless wire disconnect the normally goes thru the firewall? Do you happen to have a picture of the the fuse panel installed? if your willing to share if not i understand, i have a couple of secerts that i want to keep on my truck as well until its done. Thanks, Phil

06-09-2008, 09:58 PM	#407
jugernot Life, Be In It..... Join Date: Oct 2003 Location: Novato, California Posts: 1,498	Re: Project Lemon Drop: anything but stock! pcorriveau951, Just another thought, you could probable also put the harness through this area, but of course on the drivers side. Attached Images __________________ Project Name: LEMON DROP. Reconstruction started "December 2000". Projected completion date "Who knows" http://67-72chevytrucks.com/vboard/s...d.php?t=200082

06-09-2008, 10:41 PM	#408
pcorriveau951 Registered User Join Date: Nov 2007 Location: riverside, ca Posts: 147	Re: Project Lemon Drop: anything but stock! thank you for sharing, im trying to decide which way i want to go, i hate the look of wires im trying to figure a way to get it all done with very minimal amounts of wires being seen anywhere in the truck, going to be alot of work but i think it will be worth it.

12-02-2008, 01:42 AM	#409
crey Registered User Join Date: Nov 2008 Location: Plano Texas Posts: 18	Re: Project Lemon Drop: anything but stock! Any updates on this build guys?

12-04-2008, 12:43 AM	#410
jugernot Life, Be In It..... Join Date: Oct 2003 Location: Novato, California Posts: 1,498	Re: Project Lemon Drop: anything but stock! Sorry the only update I have is that I had a vistor today, who said my paint was to loud and gave me a ticket..................... Attached Images __________________ Project Name: LEMON DROP. Reconstruction started "December 2000". Projected completion date "Who knows" http://67-72chevytrucks.com/vboard/s...d.php?t=200082 Last edited by jugernot; 12-04-2008 at 12:47 AM.

12-04-2008, 01:27 AM	#412
Rokcrln Senior Member Join Date: Jul 2005 Location: Winters Ca. 95694 Posts: 4,843	Re: Project Lemon Drop: anything but stock! Dude I think that dam Cop parked on your Smart car So is that the new daily commuter? Kevin LFD Inc.

12-04-2008, 02:50 PM	#414
paintpyro Registered User Join Date: Aug 2001 Location: Santa Fe Springs, CA,USA Posts: 1,579	Re: Project Lemon Drop: anything but stock! I didn't see that paint option when I got my Magnum lol __________________ 70 shortbed stepside "Schleprock" 350 w/TH400 rallys and BFGs -We can rebuild it, we have the technology-lower,shinier,faster

01-20-2009, 10:49 AM	#415
drag_72 Ready to go fast!! Join Date: Aug 2008 Location: Carthage,Mo Posts: 219	Re: Project Lemon Drop: anything but stock! jesse james the bike builder once said : "international color for scared is yellow" lol just a thought but nice truck man lol __________________ 454 block .30 forged aluminum pistons steel crank valve job Holley Strip Dominator intake 1030cfm holley carb, 250 plate shot roller rockers Erson Solid cam split duration 307/310. .575/.595 lift milodon oil pan fab. aluminum valve covers 4 bolt main splayed anodized caps all studded

01-22-2009, 06:20 PM	#416
jugernot Life, Be In It..... Join Date: Oct 2003 Location: Novato, California Posts: 1,498	Re: Project Lemon Drop: anything but stock! Okay, Well I'm trying to light the inspiration fire and motivated myself to get to work on Lemon Drop. So I finished installing by March Performance Serpentine Belt system. After three trips to Napa I found the proper belt size, which was a couple of inches less that what the instruction stated. I also used a piece of 3/8 inch brake line to fad up a fuel line from the carb to the pump. I will be using a piece of stainless steel tube to replace it (more bling). I may have an issued with the routing of the lower radiator hose, but since I plan on using electric fans it may not be a problem. I think I will work on the AC/Heater hoses next.. I can’t decide if I want to use steel braided to black. I know the steel braided would look great, but $$$ has been a little hard to find. I have not inspired myself enough to finish the wiring thought. Attached Images __________________ Project Name: LEMON DROP. Reconstruction started "December 2000". Projected completion date "Who knows" http://67-72chevytrucks.com/vboard/s...d.php?t=200082

01-22-2009, 07:02 PM	#417
my67chevytruck Under Construction Join Date: Oct 2007 Location: Midlothian,TX (DFW) Posts: 4,555	Re: Project Lemon Drop: anything but stock! looking good. keep chugging along. __________________ Heath subscribe to the board here: http://67-72chevytrucks.com/vboard/payments.php http://67-72chevytrucks.com/vboard/s...d.php?t=157669 FAQ how to's 1956 Chevy Apache 1967 C10 SWB FleetSide (under construction) 1969 K10 SWB FleetSide (Future Build) 1972 C10 SWB Stepside (Future Build) 56 chevy truck : http://www.cardomain.com/ride/2955823/1 67 truck build: http://www.67-72chevytrucks.com/vboard/showthread.php?t=281357/1 69 k10: http://67-72chevytrucks.com/vboard/s...d.php?t=389470

01-22-2009, 07:50 PM	#418
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: Project Lemon Drop: anything but stock! I say use black hoses and paint the clamps a satin black.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

01-23-2009, 01:19 AM	#420
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,267	Re: Project Lemon Drop: anything but stock! It's come a long way.....can't wait to see it finished up and on the road...do you have a target date? __________________ Looking for a 67-72 swb or blazer project in or around VA.



Register or Log In To remove these advertisements.

01-28-2009, 12:52 AM	#422
jugernot Life, Be In It..... Join Date: Oct 2003 Location: Novato, California Posts: 1,498	Re: Project Lemon Drop: anything but stock! Okay, I spent about 2 hours trying to figure out what fittings I needed for the AC Heater lines. Then compared the priced with a braided hose and rubber hose. The braided kit would total $600. The rubber hose kit would total $350. This is using stainless fittings from www.gottoshow.com. So because of the cost I will probably go with the rubber hose. Anyone know of a place to get a show stuff cheaper? __________________ Project Name: LEMON DROP. Reconstruction started "December 2000". Projected completion date "Who knows" http://67-72chevytrucks.com/vboard/s...d.php?t=200082

01-31-2009, 08:03 PM	#425
smashingchuck It'd be alot cooler if you did Join Date: May 2003 Location: Three Rivers, MI Posts: 2,345	Re: Project Lemon Drop: anything but stock! Very slick build. Mine isn't nearly as far along as yours, but I never thought of how much hoses were going to cost for the vintage air system on my truck.... add it to the list $$$ __________________ 78 Build Thread 4Runner Build Last edited by smashingchuck; 01-31-2009 at 08:04 PM.

Register or Log In To remove these advertisements.