Project 67 DRGNWGN - 67 Burban!! - Page 17 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Mulk · 06-14-2011, 08:11 PM

I would say use the arms, and get round mirror heads for them.

I dig the build. Keep up the good work.

jbclassix · 06-14-2011, 08:50 PM

Quote:

Originally Posted by kev2809

lol..ya its hideous!

im thinking of putting these mirrors on...i picked them up from a friend from work. he was going to put them on his 87 el camino, but he just went with no mirrors.

what you guys think?

put 'em on something with handlebars

kev2809 · 06-14-2011, 09:07 PM

lol...

i think it looks kinda cool on there. just like peeps hanging from the door edge, just with a little flavor! all i would need to do is drill a small 3/8" hole and thread it from the backside. i wish i could get it stay on so i can stand back and take a pic..

jbclassix · 06-14-2011, 11:08 PM

I think they would work above your vent window better, but it's not my truck

CharlesUFarley · 06-15-2011, 04:37 AM

I vote a big no on those mirrors.

TailDragger72 · 06-15-2011, 10:18 AM

Quote:

Originally Posted by CharlesUFarley

I vote a big no on those mirrors.

TailDragger72 · 06-15-2011, 10:20 AM

No offense, I just think they'd look better on a bike. Otherwise, I really enjoy reading your thread and the work you've done is great!...Keep it up!

kev2809 · 06-15-2011, 06:25 PM

^^^ thanks for checking out the build.

i posted up a poll just to see what everyone thinks. im kinda on the fence here, but if i would use them i would spray them gloss black and probably hang them on the door frame edge just in front of the vent window.

Slick67 · 06-15-2011, 06:28 PM

Kev, according to the rest of your build I think whatever you decide to do will be in the right direction.

1sik7t2 · 06-16-2011, 12:17 PM

i say go with them, i was gonna do the same thing to my burb ( think i had the idea first thou) haaaa

...do it to it

Quote:

Originally Posted by kev2809

^^^ thanks for checking out the build.

i posted up a poll just to see what everyone thinks. im kinda on the fence here, but if i would use them i would spray them gloss black and probably hang them on the door frame edge just in front of the vent window.

kev2809 · 06-19-2011, 05:33 PM

Quote:

Originally Posted by Slick67

Kev, according to the rest of your build I think whatever you decide to do will be in the right direction.

Quote:

Originally Posted by 1sik7t2

i say go with them, i was gonna do the same thing to my burb ( think i had the idea first thou) haaaa

...do it to it

lol, appreciate it!

after looking over them, and my poll...i dont think im gonna use them. i know everyone says its your truck, do what you want. but, in the end, its the positive comments that usually make or break an idea. plus, i was on the fence with them to begin with!

look what happened today, motor fell out of my truck!

kev2809 · 06-19-2011, 05:35 PM

first time pulling a motor and it really wasnt that hard! i was surprised that the transmission just hit the floor..? i thought it was supposed to just stay where it should be..i got it held by a wire now to keep it off the floor..

now im going to get to work on sanding down the firewall, primer, and MAYBE paint it.

firenuttz · 06-19-2011, 06:15 PM

might want to check the trans to see if anything broke off, that happened to me when mine fell off the jack while putting it in

kev2809 · 06-19-2011, 06:40 PM

mine was never on a jack lol

it stayed put, but once i started rolling it back in the garage, i heard it land on the floor i guess. the only thing i can tell its that the bracket linkage that goes to the steering column came off, but i dont think it broke.

jmedero · 06-19-2011, 06:44 PM

Z that bad boy now before you put it together. You'll regret it if you don't do it. Lol.
Do it all the cool kids are doing it.
Posted via Mobile Device

kev2809 · 06-19-2011, 07:07 PM

lol...it was in the plans. but i had trouble getting good welds with the hobart 110 i was using when i welded the axle brackets in the back. made me a little nervous to z the front...

jmedero · 06-19-2011, 09:43 PM

I know you can find someone local that can do the welding. When my front end comes apart here soon it's on baby!! Lol
Posted via Mobile Device

kev2809 · 06-20-2011, 12:08 AM

good idea on the welding, maybe i could cut it, set it up and tack it and find someone to weld it back up.

i have a few weeks to figure it out i guess, my time frames are always off so it might be longer lol

67chevy1series · 06-20-2011, 12:29 AM

been waiting to see some progress from your burb!

kev2809 · 06-27-2011, 07:17 PM

more for u ^^^ !

got to work on the firewall this weekend, didnt plan on doing this much work to it, but hey...doesnt it always go that way?

you guys see any holes that missed?

im thinking of shaving up the wiper hole too, but if i do, where can i re route them? i dont even remember where they went, so maybe i wont need them?

heres a pic of the diagram i been following to help me out..

kev2809 · 06-27-2011, 07:19 PM

seems like there would more shaved up inside the trans tunnel..couldnt i weld up the oil line hole too..? maybe run it through the floor or something...not sure.

give some feedback plz..i would like to get this thing primed up this week then start the body work!

FRENCHBLUE72 · 06-27-2011, 07:43 PM

i RAN EVERYTHING i COULD THREW THE TRANS TUNNEL...

jbclassix · 06-27-2011, 10:46 PM

I would shave the wiring harness hole, wiper, and oil pressure line. It would be real easy to modify them and run them through the tunnel out of sight!

kev2809 · 06-27-2011, 11:01 PM

ditto, i think the wiper hole and oil line hole are gone by tomorrow night!

i was trying to take off the fuse block to try to figure something out, but i couldnt even get it off! i think i may leave it though, because the wiring hole next to it has all my air lines and switchbox wiring...but i guess i could reroute that too....hmmmmmm

FRENCHBLUE72 · 06-28-2011, 07:29 AM

Do it now or you will be kickin yourself in the butt later when you wished you would have done it when you had the chance..

06-14-2011, 08:11 PM	#401
Mulk Registered User Join Date: Mar 2010 Location: Sin City, Nevada Posts: 152	Re: Project 67 DRGNWGN - 67 Burban!! I would say use the arms, and get round mirror heads for them. I dig the build. Keep up the good work. __________________ Eric '68 C20 Suburban, Bagged with Suicide 3rd Door, and Loaded with a 396 - Under Construction http://67-72chevytrucks.com/vboard/s...d.php?t=403690

06-14-2011, 09:07 PM	#403
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,178	Re: Project 67 DRGNWGN - 67 Burban!! lol... i think it looks kinda cool on there. just like peeps hanging from the door edge, just with a little flavor! all i would need to do is drill a small 3/8" hole and thread it from the backside. i wish i could get it stay on so i can stand back and take a pic.. __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

06-14-2011, 11:08 PM	#404
jbclassix Junk Yartist Join Date: Jul 2009 Location: Greeley, CO Posts: 2,203	Re: Project 67 DRGNWGN - 67 Burban!! I think they would work above your vent window better, but it's not my truck __________________ -Jeremy YOU ONLY FAIL IF YOU STOP TRYING 70 Crew Cab Build Link 70 GMC Suburban 4X4 build thread 95 Yukon Daily Driver Rebuilding an NP205

06-15-2011, 04:37 AM	#405
CharlesUFarley Registered User Join Date: Dec 2009 Location: Huntington Beach, Ca. Posts: 78	Re: Project 67 DRGNWGN - 67 Burban!! I vote a big no on those mirrors.

06-15-2011, 10:20 AM	#407
TailDragger72 Registered User Join Date: Jun 2011 Location: Cincinnati, Ohio Posts: 9	Re: Project 67 DRGNWGN - 67 Burban!! No offense, I just think they'd look better on a bike. Otherwise, I really enjoy reading your thread and the work you've done is great!...Keep it up!

06-15-2011, 06:25 PM	#408
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,178	Re: Project 67 DRGNWGN - 67 Burban!! ^^^ thanks for checking out the build. i posted up a poll just to see what everyone thinks. im kinda on the fence here, but if i would use them i would spray them gloss black and probably hang them on the door frame edge just in front of the vent window. __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_] Last edited by kev2809; 06-15-2011 at 06:25 PM.

06-15-2011, 06:28 PM	#409
Slick67 Sofa King Crazy!! Join Date: Oct 2008 Location: Houston, TX Posts: 3,090	Re: Project 67 DRGNWGN - 67 Burban!! Kev, according to the rest of your build I think whatever you decide to do will be in the right direction. __________________ You found the Tater. *My Blazer Build (New)* - http://67-72chevytrucks.com/vboard/s...d.php?t=654650 *My 67 Build* - http://67-72chevytrucks.com/vboard/s...d.php?t=335650 67 Chevy LWB big window a/c AKA TOTALLED BY A JACKASS. 1972 2wd Blazer "Porterbuilt and Sloshed"

06-19-2011, 05:35 PM	#412
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,178	Re: Project 67 DRGNWGN - 67 Burban!! first time pulling a motor and it really wasnt that hard! i was surprised that the transmission just hit the floor..? i thought it was supposed to just stay where it should be..i got it held by a wire now to keep it off the floor.. now im going to get to work on sanding down the firewall, primer, and MAYBE paint it. __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_] Last edited by kev2809; 06-19-2011 at 05:36 PM.

06-19-2011, 06:15 PM	#413
firenuttz 2lo4me/ntlonuf/ntfstnf Join Date: Aug 2010 Location: Newport News, VA Posts: 239	Re: Project 67 DRGNWGN - 67 Burban!! might want to check the trans to see if anything broke off, that happened to me when mine fell off the jack while putting it in __________________ 62 GMC swb fleetside~ project: still undecided 84 Chevy 4wd crew cab 8 inch lift and 37" goodyear h1 pulloffs, still rockin the old mans former plate 2LO4ME 65 chevy 1 ton panel~ bagged/bodied duramax plans slowly in progress... 02 Silverado cclb duramax~ sas'd "bro" truck with more rust than imagineable...

06-19-2011, 06:40 PM	#414
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,178	Re: Project 67 DRGNWGN - 67 Burban!! mine was never on a jack lol it stayed put, but once i started rolling it back in the garage, i heard it land on the floor i guess. the only thing i can tell its that the bracket linkage that goes to the steering column came off, but i dont think it broke. __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

06-19-2011, 06:44 PM	#415
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,073	Re: Project 67 DRGNWGN - 67 Burban!! Z that bad boy now before you put it together. You'll regret it if you don't do it. Lol. Do it all the cool kids are doing it. Posted via Mobile Device __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

06-19-2011, 07:07 PM	#416
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,178	Re: Project 67 DRGNWGN - 67 Burban!! lol...it was in the plans. but i had trouble getting good welds with the hobart 110 i was using when i welded the axle brackets in the back. made me a little nervous to z the front... __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

06-19-2011, 09:43 PM	#417
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,073	Re: Project 67 DRGNWGN - 67 Burban!! I know you can find someone local that can do the welding. When my front end comes apart here soon it's on baby!! Lol Posted via Mobile Device __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

06-20-2011, 12:08 AM	#418
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,178	Re: Project 67 DRGNWGN - 67 Burban!! good idea on the welding, maybe i could cut it, set it up and tack it and find someone to weld it back up. i have a few weeks to figure it out i guess, my time frames are always off so it might be longer lol __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

06-20-2011, 12:29 AM	#419
67chevy1series Registered User Join Date: Mar 2010 Location: a t w a t e r cali 95301 Posts: 10,713	Re: Project 67 DRGNWGN - 67 Burban!! been waiting to see some progress from your burb!



Register or Log In To remove these advertisements.

06-27-2011, 07:17 PM	#420
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,178	Re: Project 67 DRGNWGN - 67 Burban!! more for u ^^^ ! got to work on the firewall this weekend, didnt plan on doing this much work to it, but hey...doesnt it always go that way? you guys see any holes that missed? im thinking of shaving up the wiper hole too, but if i do, where can i re route them? i dont even remember where they went, so maybe i wont need them? heres a pic of the diagram i been following to help me out.. __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

06-27-2011, 07:19 PM	#421
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,178	Re: Project 67 DRGNWGN - 67 Burban!! seems like there would more shaved up inside the trans tunnel..couldnt i weld up the oil line hole too..? maybe run it through the floor or something...not sure. give some feedback plz..i would like to get this thing primed up this week then start the body work! __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

06-27-2011, 07:43 PM	#422
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: Project 67 DRGNWGN - 67 Burban!! i RAN EVERYTHING i COULD THREW THE TRANS TUNNEL... __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

06-27-2011, 10:46 PM	#423
jbclassix Junk Yartist Join Date: Jul 2009 Location: Greeley, CO Posts: 2,203	Re: Project 67 DRGNWGN - 67 Burban!! I would shave the wiring harness hole, wiper, and oil pressure line. It would be real easy to modify them and run them through the tunnel out of sight! __________________ -Jeremy YOU ONLY FAIL IF YOU STOP TRYING 70 Crew Cab Build Link 70 GMC Suburban 4X4 build thread 95 Yukon Daily Driver Rebuilding an NP205

06-27-2011, 11:01 PM	#424
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,178	Re: Project 67 DRGNWGN - 67 Burban!! ditto, i think the wiper hole and oil line hole are gone by tomorrow night! i was trying to take off the fuse block to try to figure something out, but i couldnt even get it off! i think i may leave it though, because the wiring hole next to it has all my air lines and switchbox wiring...but i guess i could reroute that too....hmmmmmm __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

06-28-2011, 07:29 AM	#425
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: Project 67 DRGNWGN - 67 Burban!! Do it now or you will be kickin yourself in the butt later when you wished you would have done it when you had the chance.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

Register or Log In To remove these advertisements.