Donz '65 SWB Stepper Budget Build...

[Alan's Classic]

Glad you found the source of the vibration.

It's always cool to meet fellow members of this forum. Great people.
Posted via Mobile Device

[Ta2Don]

Thanks Alan, if I get over your way I will be sure to say Hello!!!

I posted about that part on my Son's Volvo and questioned the need for a 2 piece driveshaft... In talking with Parts people I believe it is a Safety feature... the motor mounts are designed to give way in the event of a front end collision in order to keep the motor from being forced into the passenger compartment, so between the boy and I we deduced the 2 piece D/S is part of that equation as well.

Have a Blessed Week!

[Ta2Don]

Decisions, Decisions... One of my local friends is building a ratrod truck out of a free truck he ended up with, a 98-2000 stepside chevy, and he wants to trade me these 20's for my 15's...


Your opinions are encouraged and welcomed... As I stand right now, I will have to go with a bigger rim nonetheless, with the addition of the rear lowering blocks the rear-end u-bolts are riding below the rim line.

[Bomp]

my .02 is grab'em.
20's are spendy especially if the tires are good. Stock steelies are fairly reasonable unless you get them from auctions in Nebraska.
The wheels you have at the moment look great but if their not big enough then that might be a problem. You can always sell them later if things change.
Them 20's look sick!

[jlsanborn]

Have you thought about using more spring and less block? How wide are them 20's? Could be a can of worms trying to tuck those.

[Ta2Don]

Originally Posted by Bomp

my .02 is grab'em.
Stock steelies are fairly reasonable unless you get them from auctions in Nebraska.

Thanx Greg!!! ...and the Nebraska mention...

Originally Posted by jlsanborn

Have you thought about using more spring and less block? How wide are them 20's? Could be a can of worms trying to tuck those.

I was planning on using at least 17's but got these 15's for a song...
Then this trade offer popped up... They are currently installed on a bone stock truck. Not sure of the rim width, but the tire sizes are 265/50r20 and 275/45r20...
Thanks for the heads up on tucking them, I will be test fitting before the deal is sealed.
I'm nowhere near ready to roll and my bud is trying to sell his house and move so he is also at least 6 months out before he would be ready to drive his project...

Thanks for the input Gentlemen!!!

[realvc]

Very nice truck build going on here.
I saw your post on Grizz's thread on GJ and had to check things out and join this forum too.
Looks I have another cool internet place to hang out now.
My home is not too far from your neck of woods.
Vince

[Ta2Don]

Thanx Man! I see a Vette in the Avatar, any trucks in the Mix?
If you ever get up Searcy way, my studio is at 2903 E Race Ave

[NEWFISHER]

Great build! I'm liking the blue and the accents.
Posted via Mobile Device

[Grizz1963]

Originally Posted by realvc

Very nice truck build going on here.
I saw your post on Grizz's thread on GJ and had to check things out and join this forum too.
Looks I have another cool internet place to hang out now.
My home is not too far from your neck of woods.
Vince

Welcome Vince.

You will find a very similar culture to GJ here and a load of knowlege.

Don, with what you plan for your truck, and if the tires ( real spelling tyres) are good, I agree with Bomp.

Go for it.
Posted via Mobile Device

[jlsanborn]

Originally Posted by Grizz1963

Welcome Vince.

You will find a very similar culture to GJ here and a load of knowlege.

Don, with what you plan for your truck, and if the tires ( real spelling tyres) are good, I agree with Bomp.

Go for it.
Posted via Mobile Device

x2 to Vince! Welcome to the best Chevy forum out there. You've stumbled across a genuine thread.

[realvc]

Originally Posted by Ta2Don

Thanx Man! I see a Vette in the Avatar, any trucks in the Mix?
If you ever get up Searcy way, my studio is at 2903 E Race Ave

Yes I've got a 99 Z71 to go with the 99 vette. I tell people I collect 99's.

Thanks for the invite, I get up to Kensett every once in a while.

[realvc]

Thanks for the welcomes Grizz/Rian and jlsaborn.

I can see by the work being done by Don, Bomp and others on here that I will have a lot to keep up with. I will tackle the mechanics but body work is still over my head. May be one day I will take the plunge.

[Modges'66]

Is anyone here building trucks, or just talking about it?...Just kiddin!!!
Go for the 20's Don!
Don't look back!

[Ta2Don]

Originally Posted by Modges'66

Is anyone here building trucks, or just talking about it?...Just kiddin!!!
Go for the 20's Don!
Don't look back!

Thanks for the kick in the backside!!!
Gonna set life aside this weekend and get some truck work done, PERIOD!!!

[Ta2Don]

Finally a bit of a real update...

after starting the day finishing some grinding on the new-to-me hood for my 90 DD...


Pulled the tarp from my Radiator support, Grill support, and inner fenders... Preparing to disassemble to clean and start paint work...



With the help of my Son and a friend of my daughter's, we set the bed on the frame and backed it into my work-tent...



the reason... to decide on placement of '65 Impala taillights and start the fabrication process...




also finally finished with my other Son's Volvo... had a gas leak at the filler tube, drop tank, repair, re-install... then had to repair newly-developed leak at one of the hoses connecting on top of the tank...

Later Guyz and Galz...

[chad64chevy]

I like the impala lights

[Modges'66]

Originally Posted by Ta2Don

Thanks for the kick in the backside!!!
Gonna set life aside this weekend and get some truck work done, PERIOD!!!

I don't know why, but sometimes I feel obligated to keep people focused...Just my nature (not sure if that is a good trait in my personal life).
Maybe it is the management part of me stepping over the line.
I don't mean anything by it, honestly.
In fact, I looked at my post and said:
Really? You just posted that?....Are you kidding me?

But I am interested in seeing you move forward!

[Jmorales3181]

I'd say go for the twenties myself you can always get different ones down the road of your choice. Not sure how low you will be going with your truck but Atleast you could get an idea on how your truck will sit. Glad you were able to get some truck time in!!!

[BOXER957]

Don I like those Impala lights If you happen to have an extra set I might know somebody that's looking for some....... Lookin good!

[cl08]

Originally Posted by Ta2Don

Finally a bit of a real update...

after starting the day finishing some grinding on the new-to-me hood for my 90 DD...


Pulled the tarp from my Radiator support, Grill support, and inner fenders... Preparing to disassemble to clean and start paint work...



With the help of my Son and a friend of my daughter's, we set the bed on the frame and backed it into my work-tent...



the reason... to decide on placement of '65 Impala taillights and start the fabrication process...




also finally finished with my other Son's Volvo... had a gas leak at the filler tube, drop tank, repair, re-install... then had to repair newly-developed leak at one of the hoses connecting on top of the tank...

Later Guyz and Galz...

NICE choice on taillights, same ones I was wanting to do if I ever started a project truck. great build!!!

[jlsanborn]

x10 on the tail lights!

[Ta2Don]

Thanks Guyz...

Sorry Boxer... Ordered those two off flea-bay...

Thanx again for keeping this old guy a bit motorvated, yes I know... I spelled it that way...

[realvc]

Hello Don
I like your Impala tail lights too. I remember back in the day seeing 59 Cadillac bullet tail lights on step side fenders some would be surface mounted and some would be frenched in. Both ways looked very cool. There used to be a lot of frenched in radio antennas too.

[Ta2Don]

Originally Posted by realvc

Hello Don
I like your Impala tail lights too. I remember back in the day seeing 59 Cadillac bullet tail lights on step side fenders some would be surface mounted and some would be frenched in. Both ways looked very cool. There used to be a lot of frenched in radio antennas too.

Great talking with you the other day!!! Gonna check on some thin wall pipe tomorrow for some material to semi-french in those Impala lightz...