The Ultimate Craigslist find thread

[VictoriaHardware]

Originally Posted by 83GMCK2500

Here's the pics from that link.

Just judging from the pics, that C80 is a peach. Even with shipping would be a great start for a well-optioned truck. It no doubt will need lots of maintenance to get roadworthy again, but you would be hard pressed to find a better starting point. I sure hope it goes to a good indoor home.

[C10 - C90 Bill]

Originally Posted by 83GMCK2500

I feel like Bill is really gonna dig this one.

Pretty cool truck.

Thanks for posting it.

Strange that it is only a 5000 though. At first glance, I was sure it was a 6500.

Mostly likely means that it is a 401 V-6, instead of a 478.

Love the 5 X 3 Trans it has. My 6500 was just a 5 and 2-Speed Rear.

The Differential Lock means both Rears are locked in and turning.

[Greg58]

Here is a 53 GMC 2Ton that I spotted, it looks like it is in Iowa.

https://omaha.craigslist.org/cto/d/1...375741640.html

Greg

[factorystock]

Originally Posted by factorystock

GVW is not much more than a heavy 60 series, but you get the 18.K rear axle and 7k or 9K front axle.

Most 63-66 C80's will have the narrow fenders, unless it has the 9K or 11k front axle. Can't tell from the photos if the green '65 C 80 has the wide or narrow fenders, but here is the comparison shot between the lighter and heavier front ends.

[C10 - C90 Bill]

Good picture to see the comparison between the two.

I always wondered why GM made the narrow starting in '63, but I recently saw a factory advertisement on it saying that drivers prefer the better clearance.

I always drove the wides out of co-incidence and clearances were never a problem.

Never even had a thought that it could be one of the reasons why, lol.

[C10 - C90 Bill]

I found the info on the narrow fenders and it is actually in a promotional film. The particular info on it starts at about time 3:08.

You Tube

[factorystock]

Originally Posted by C10 - C90 Bill

I found the info on the narrow fenders

Thanks for posting film, nice to see my statements are accurate.

[cam.man67]

Here's a pretty nice '65 GMC 5509 for sale:

https://lancaster.craigslist.org/grd...377784991.html

[allchevy58]

Originally Posted by cam.man67

Here's a pretty nice '65 GMC 5509 for sale:

https://lancaster.craigslist.org/grd...377784991.html

Nice looking truck!

[Dannny B]

Originally Posted by C10 - C90 Bill

I found the info on the narrow fenders and it is actually in a promotional film. The particular info on it starts at about time 3:08.

www.youtube.com/watch?v=aht7fRgnFcw&index=2&list=PL9ctf-QM7gcmDO_b7Ixjshk2hb4UxuGla

i couldn't get the embedded video to load so, I'm posting it without embed. It is a great vid

[Jeffh]

Not exactly a Craigslist find but online anyway
Me thinks somebody did all right taking this 61 Viking home for $775

bigiron.com/Lots/1961ChevroletViking60GrainTruck

[68panelman]

Nice score! Appears to have the 261 big six. Great running engine

[C10 - C90 Bill]

Other than a few dents, sheet metal looks great.

They sure did take a bunch of pictures:

https://www.bigiron.com/Lots/1961Che...ng60GrainTruck

[Greg58]

Not CL, but an online auction in Kansas.
Looks to be a clean low mileage 1969 C-50 with a BBC 366.

Greg

https://www.purplewave.com/auction/180206/item/DC8379

[83GMCK2500]

1980 Gmc 9500 m - $12000 (Greenbush) (Link)

80 Gmc 9500 long hood. 8v71 Detroit. Ten speed. Truck is very nice for age. Came out of the south. Sat for ten years in a shed.

[C10 - C90 Bill]

Interesting truck, although the year is way off.

Should be a '70 to '72.

Would love to have it, but ouch on the price, lol.

[83GMCK2500]

I doubted the year, thank you for confirming my suspicions. I went on a 9500 search after reading your recent thread about the one you drove with the 637. Do you have any pictures of the air cleaner arrangement on these? I'm sure it varies by engine but I just noticed that it doesn't have canisters hung outside the hood.

[C10 - C90 Bill]

The 9500, Gas and Diesels, have the Air Cleaner under the hood. I believe it can be seen on the '72 9500 with the 8V-71 that I went to look at a couple of years ago. There should still be pictures of it here on the forums. I took the pictures and Bill (63 & 64 Bowties) posted them for me. I'll try to find them.

[C10 - C90 Bill]

I found the pictures, but the ones I took don't show the Air Cleaner as good as the original listing does. Check out the pictures here: (click onto "More Media" for all the pictures. You will also see a short video of the truck here as well).

https://www.govdeals.com/index.cfm?f...98&acctid=2455

By the way, this truck is very similar to the truck that you posted today.

[factorystock]

Not on craiglist, but ebay A '64 C 80 with heavy specs. big block, air brakes and big Eaton rear axle.https://www.ebay.com/itm/1964-Chevy-...1aasNd&vxp=mtr

[C10 - C90 Bill]

Interesting truck.

I agree with the write-up, the Hood looks like the worst part which can be easily changed.

The GVW of 33,000 probably means 11 Fronts and 22 Rears.

Nice heavy truck.

Another Hood, a little body work and paint would make a big difference.

[jumpsoffrock]

andrewmp6 posted this:
https://louisville.craigslist.org/ct...481663483.html

Selling my 1962 GMC 4000 flatbed truck with 40,000 lbs winch. This used to be a logging truck from Tennessee. Neat old truck. Cab and doors are rust free. Runs good with a 366 big block. Two speed rear. PTO that powers the winch. Thanks for looking

[jumpsoffrock]

Oh and the rest.

[HO455]

62 40-50-60? Perfect for the folks who like to bring heavy stuff home. $2990!

https://seattle.craigslist.org/est/c...501223478.html

1962 Chevrolet dump truck with with cherry-picker. Later model Chevy V8 engine, very low model tires. Original family owned. Needs some TLC. $2,990

[C10 - C90 Bill]

A '62 LCF-60.

Would be a great restoration project.