How about some pics of 60-66 Trucks - Page 175 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Downlow2xfo · 12-25-2013, 11:41 PM

I love the wheels and the truck is amazing!!!!

Downlow2xfo · 12-25-2013, 11:42 PM

Nice suburban too

willyp · 12-26-2013, 09:36 PM

Christmas eve cruise, weather was nice.

**TJ's Chevy** · 12-26-2013, 11:15 PM

Small update on mine...I put on a side spare tire carrier!

Piper71c10 · 06-09-2004, 01:40 PM

rinco fwd'd me these photos to post...

Piper71c10 · 06-09-2004, 03:58 PM

Here are some more recent pics. Notice I painted the red hood, thanks to everyone's suggestions...

I shaved the door last week. I don't have a wire feed welder, so I used Oxy-acty and gas welded a plate in there. Pretty slick if I do say so myself.

Piper

littlee_domn8r · 06-13-2004, 07:51 PM

here's some pics of my 63

ItsNotABlazer · 06-13-2004, 10:40 PM

Lets just say mine is a little bit behind the rest of these guys. It sat in the woods for about 10 years before I pulled it out for this pic. I have done a few things such as remove the engine and trans but thats about it lol.

Neat thing about the truck is the fact that my dad bought it new in 64 and he traded it to my uncle(for 75 bales of hay if I recall correctly

) for a while before i got it back from him. It isnt much to look at but it doesnt cost me anything to sit there until it gets its time of restoring. Too many projects=bad idea.

Brad

scottyd · 07-02-2004, 10:01 PM

well here it was............

scottyd · 07-02-2004, 10:04 PM

and here it is.............i went off the deep end im afraid!!

Iridesa · 07-04-2004, 05:02 PM

Hi,
I'm new to the forum. Had a 66 swb side step that was stollen and stripped. Bought another 66 to start over with. This one is [was] a custom camper w/work bed on it when I purchased it a month ago. Seon, over at the parts board, sold me the lwb bed off a 61. It's slowly coming together.

Hope the pix post OK.
A lady chevy lover,
Iridesa

phos · 08-27-2004, 10:49 PM

Well just got back from paint, its a pretty good start. This is going on a 6 year project. Started out with a truck that should have been in the crusher. Now she is a survivor, sort of. Just some littel custum touches.

SeaBass44 · 07-29-2004, 05:06 PM

ok, here is a pick, I traded for this 63 yesterday

, it sits on a 80ish blazer frame with rear leafs moved back to fit the wheelbase. auto, dropping in a 402BBC out of my 70GMC I parted out.

Chevyboy1962 · 09-05-2004, 12:22 AM

Here's mine

pic of my '62 C10
Will post a link to some before pics of my truck from the day after I had brought her home.

She looks new now compared to the condition she was in when I first got her.

David

raphyel · 10-06-2004, 12:24 PM

Here is mine, this is over a year ago when I got it home. It is under major rebuild right now

*gn4u2c* · 01-27-2005, 11:33 PM

My new truck Just bought it 62 - 305 v6 going to be good times cruzin in it.

bigblackcat · 04-14-2009, 01:21 AM

Here are my piles!!!! Sold the black one a couple of years ago.

60chvstepside · 04-14-2009, 01:30 AM

Quote:

Originally Posted by bigblackcat

Here are my piles!!!! Sold the black one a couple of years ago.

ohhhhh i want that gmc hood on my truck again,they seem hard to find around here though

jchav62 · 04-14-2009, 08:42 AM

Quote:

Originally Posted by 60chvstepside

ohhhhh i want that gmc hood on my truck again,they seem hard to find around here though

Those are '60 and '61 Chevy hoods.

Very nice truck, BTW! That black one is awesome... I love that looks.

60chvstepside · 04-14-2009, 01:11 PM

Quote:

Originally Posted by jchav62

Those are '60 and '61 Chevy hoods.

Very nice truck, BTW! That black one is awesome... I love that looks.

ok so i'm wrong again nothing new

still can't seem to locate a decent one around here,one day i might tho

BigRedTruck · 01-10-2010, 01:28 AM

Where did you find that hood emblem? I need one badly!

MountainGoat1966 · 01-10-2010, 01:51 AM

What hood emblem ?

jan · 04-26-2009, 12:00 PM

/Users/macowner/Desktop/P4220389.JPG/Users/macowner/Desktop/P3120312.JPG

Strodder · 04-26-2009, 12:55 PM

Quote:

Originally Posted by jan

/Users/macowner/Desktop/P4220389.JPG/Users/macowner/Desktop/P3120312.JPG

No workie.

hare0714 · 04-27-2009, 03:17 PM

this is my first post ,so i will start off by showing off my truck. 66 factory 4 wheel drive.

12-25-2013, 11:41 PM	#1
Downlow2xfo Registered User Join Date: Jun 2013 Location: Phenix City, AL Posts: 244	Re: How about some pics of 60-66 Trucks I love the wheels and the truck is amazing!!!!

12-25-2013, 11:42 PM	#2
Downlow2xfo Registered User Join Date: Jun 2013 Location: Phenix City, AL Posts: 244	Re: How about some pics of 60-66 Trucks Nice suburban too

12-26-2013, 09:36 PM	#3
willyp Registered User Join Date: Nov 2008 Location: Houston TX Posts: 362	Re: How about some pics of 60-66 Trucks Christmas eve cruise, weather was nice. Attached Images __________________ The price of cool aint cheap.

12-26-2013, 11:15 PM	#4
TJ's Chevy Post Whore Join Date: Mar 2013 Location: Southern Oregon Posts: 10,384	Re: How about some pics of 60-66 Trucks Small update on mine...I put on a side spare tire carrier! Attached Images __________________ 1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw

06-09-2004, 01:40 PM	#5
Piper71c10 Unending Project Join Date: Aug 2003 Location: Sequim, WA Posts: 337	Rinco's Truck rinco fwd'd me these photos to post... Attached Images

06-09-2004, 03:58 PM	#6
Piper71c10 Unending Project Join Date: Aug 2003 Location: Sequim, WA Posts: 337	Myne... Here are some more recent pics. Notice I painted the red hood, thanks to everyone's suggestions... I shaved the door last week. I don't have a wire feed welder, so I used Oxy-acty and gas welded a plate in there. Pretty slick if I do say so myself. Piper Attached Images

06-13-2004, 07:51 PM	#7
littlee_domn8r AKA "Hurricane Hank" Join Date: Sep 2003 Location: Elk Point, South Dakota Posts: 316	here's some pics of my 63 Attached Images __________________ "looking back, knowing that you gave it your all.... win or lose, you finish a Champion" Dale Earnhardt "They say hard work never killed anyone, But why take a chance? 63 GMC C10 Custom LWB 355/350 AT 00 Chevy Silverado 1500 base V6/AT 07 Chevy Monte Carlo SS 5.3 V8 Last edited by N2TRUX; 03-06-2006 at 11:44 AM.

06-13-2004, 10:40 PM	#8
ItsNotABlazer The full convertible guy Join Date: Jul 2001 Location: Paris Texas Posts: 728	Lets just say mine is a little bit behind the rest of these guys. It sat in the woods for about 10 years before I pulled it out for this pic. I have done a few things such as remove the engine and trans but thats about it lol. Neat thing about the truck is the fact that my dad bought it new in 64 and he traded it to my uncle(for 75 bales of hay if I recall correctly ) for a while before i got it back from him. It isnt much to look at but it doesnt cost me anything to sit there until it gets its time of restoring. Too many projects=bad idea. Brad Attached Images __________________ 2012 Kawasaki Vaquero (Lime Green) 2000 BMW 740iL 1995 Chevy ECSB riding on air 1975 GMC Jimmy 2WD lowered 4/6 1972 Chevy Trazer soon to be roadster 1965 Mustang 289/3 speed (friends dad bought it new) 1964 Chevy C10 (dad bought it new)

07-02-2004, 10:01 PM	#9
scottyd Registered User Join Date: Mar 2004 Location: waco tx Posts: 113	well here it was............ Attached Images __________________ 1962 chevy shortwide,bagged, notched and Zed frame,top chopped 3 1/2", sectioned 2" tubbed (31x18.5 mickey Ts),shaved,currently 51"s from ground to roof top!

07-02-2004, 10:04 PM	#10
scottyd Registered User Join Date: Mar 2004 Location: waco tx Posts: 113	and here it is.............i went off the deep end im afraid!! Attached Images __________________ 1962 chevy shortwide,bagged, notched and Zed frame,top chopped 3 1/2", sectioned 2" tubbed (31x18.5 mickey Ts),shaved,currently 51"s from ground to roof top! Last edited by scottyd; 07-02-2004 at 10:36 PM.

07-04-2004, 05:02 PM	#11
Iridesa Registered User Join Date: Jun 2004 Location: So. Cal Posts: 7	Hi, I'm new to the forum. Had a 66 swb side step that was stollen and stripped. Bought another 66 to start over with. This one is [was] a custom camper w/work bed on it when I purchased it a month ago. Seon, over at the parts board, sold me the lwb bed off a 61. It's slowly coming together. Hope the pix post OK. A lady chevy lover, Iridesa Attached Images Last edited by N2TRUX; 03-06-2006 at 12:06 PM. Reason: Resized pic.

08-27-2004, 10:49 PM	#12
phos Registered User Join Date: Mar 2003 Location: Mckinney, TX Posts: 42	My 65 Well just got back from paint, its a pretty good start. This is going on a 6 year project. Started out with a truck that should have been in the crusher. Now she is a survivor, sort of. Just some littel custum touches. Attached Images __________________ Mike m-snellgrove@ti.com snoogy@sbcglobal.net

07-29-2004, 05:06 PM	#13
SeaBass44 Registered User Join Date: Feb 2004 Posts: 10	ok, here is a pick, I traded for this 63 yesterday , it sits on a 80ish blazer frame with rear leafs moved back to fit the wheelbase. auto, dropping in a 402BBC out of my 70GMC I parted out. Attached Images

09-05-2004, 12:22 AM	#14
Chevyboy1962 C10 now is a GMC Join Date: Jun 2003 Location: Modesto, Ca Posts: 740	Here's mine pic of my '62 C10 Will post a link to some before pics of my truck from the day after I had brought her home. She looks new now compared to the condition she was in when I first got her. David __________________ 1962 C10 swb fleetside, big window, custom cab 350/TH350 combo...Hot Rod 1963 C10 lwb fleetside, small window 230/4 speed...Blvd Cruiser *1931 Ford 5 window coupe (soon to be Hot Rod)... Father & Son project

10-06-2004, 12:24 PM	#15
raphyel Registered User Join Date: Aug 2004 Location: Cranston, RI Posts: 162	here's mine as I got it home, before total disassembly Here is mine, this is over a year ago when I got it home. It is under major rebuild right now Attached Images



Register or Log In To remove these advertisements.

01-27-2005, 11:33 PM	#16
gn4u2c Account Suspended Join Date: Mar 2003 Location: southern pa Posts: 698	My new truck Just bought it 62 - 305 v6 going to be good times cruzin in it. Attached Images

04-14-2009, 01:21 AM	#17
bigblackcat Registered User Join Date: Dec 2006 Location: bremerton Posts: 17	Re: How about some pics of 60-66 Trucks Here are my piles!!!! Sold the black one a couple of years ago. Attached Images

01-10-2010, 01:28 AM	#21
BigRedTruck Registered User Join Date: Nov 2009 Location: Louisville, KY Posts: 13	Re: How about some pics of 60-66 Trucks Where did you find that hood emblem? I need one badly!

01-10-2010, 01:51 AM	#22
MountainGoat1966 Registered User Join Date: Jan 2010 Location: northern arizona Posts: 259	Re: How about some pics of 60-66 Trucks What hood emblem ? __________________ "Off the grid and on the seven day weekend plan" "One person cannot know everything, but between all of us, there isn't much we don't know."

04-26-2009, 12:00 PM	#23
jan Registered User Join Date: Oct 2008 Location: nanaimo b.c. Posts: 3	Re: How about some pics of 60-66 Trucks /Users/macowner/Desktop/P4220389.JPG/Users/macowner/Desktop/P3120312.JPG

04-27-2009, 03:17 PM	#25
hare0714 Registered User Join Date: Apr 2009 Location: trenton, ohio Posts: 8	Re: How about some pics of 60-66 Trucks this is my first post ,so i will start off by showing off my truck. 66 factory 4 wheel drive.

Register or Log In To remove these advertisements.