What Did You Do With Your Truck Today ?

[oldcouple]

New gas tank was supposed to include the sending unit gasket, a 2 buck part, not there, vendor says will reimburse me. Small town, parts shop sells me make your own. Spend an hour travel, cutting, fitting, all done. Go to get box from Autometer sending unit that I have looked in at least a dozen times and the gasket falls out, its been in there nearly 20 years. Now I have a spare.

[JumboAMONGus]

put my windshield wiper motor in after greasing and cleaning and now it working , i have vacuum wipers once again at a slow speed ,,lol maybe they will go faster in the rain , now trying to figure out the heater someone looks like they put a delux car heater unit in it all fits up had diffrent holes for heater core tho and the drefrost heat switch cable is diffrent location

[OrrieG]

Nothing, worked on Ms. Joan's greenhouse foundation.

[OrrieG]

Originally Posted by JumboAMONGus

put my windshield wiper motor in after greasing and cleaning and now it working , i have vacuum wipers once again at a slow speed ,,lol maybe they will go faster in the rain , now trying to figure out the heater someone looks like they put a delux car heater unit in it all fits up had diffrent holes for heater core tho and the drefrost heat switch cable is diffrent location

There is a standard heater assy on Boise CL, NOT deluxe.

[focusedontheprize]

Unfortunately I can only work on this during the weekends. Commuting 5 hours each way until it is drive-able.

Took out the seat to clean underneath it. It had to have at least 6 inches of acorns, leaves and oh...a possum and 2 birds. Once I cleaned that out, I am was happy to see pretty solid floors and corner cabs. There is a small patch I will do (not now) in the passenger toe board, but other than that she looks solid.

[squirrely_1]

hey focusedontheprise, i found the same! removed my gas tank cleaned all the fuel lines ,sand blasted them, reinstalled and cranked the motor over..

[OrrieG]

Finished up the tailgate cables, took two different tries to get it the way I wanted.

[youngrodder]

I worked on converting my OEM dome light for my 48 over to LED..It will look stock until you turn on the light. I will do a write up once I'm finished. I stole the idea from someone that did that same thing for a 58-59. It is a little different for AD trucks. Inexpensive as well.

So far it coming together nicely.

Marc

[Daze57]

youngrodder

do you happen to have a link for the 58-59 dome light idea? i am a guessin it would be the same for us 55-57 guys

[weaintscared]

Got come seat from the junk yard set them in place looks good think these just might work.
My build
http://67-72chevytrucks.com/vboard/s...d.php?t=468622

[youngrodder]

Originally Posted by Daze57

youngrodder

do you happen to have a link for the 58-59 dome light idea? i am a guessin it would be the same for us 55-57 guys

Daze57

Ok, I had to do some diggin....It was OKGMC4 that I barrowed the idea from and it was for his 56 (not 58 as I stated previously..ooops).
http://67-72chevytrucks.com/vboard/s...=368649&page=7

The LED circuit board I bought was a smaller size beacuse the light housing for a 47-53 is different.

Marc

[oldcouple]

Stopped by the shop, bed is painted, yippee!

[Dan in Pasadena]

Originally Posted by youngrodder

Daze57

Ok, I had to do some diggin....It was OKGMC4 that I barrowed the idea from and it was for his 56 (not 58 as I stated previously..ooops).
http://67-72chevytrucks.com/vboard/s...=368649&page=7

The LED circuit board I bought was a smaller size beacuse the light housing for a 47-53 is different.

Marc

Niice. I too don't like the yellowish light the original puts out. BUt I'm concerned cause I still am running a generator/voltage regulator and the eBay listing makes a point of saying the board can't stand greater than 13v. Pretty sure mine charges at greater than that so I can't use this idea til I convert to an alternator.

[B_Hix]

Nasty cold outside, snow on the ground so I'm grounded to the garage.

I have been doing a lotta 'walk out to the garage and stare at the truck' the last few days.

I still need to prep/prime and paint my front fenders and hood and that ain't happening till spring.

So I'm tinkering with interior stuff off and on. Right now the 'rear cab cover' area (where the fuel tank used to be has me staring at the truck more than working on it. Mentally trying to envision what I want to do with the area.

I have the base in that my seats will sit on, and the rear cab area is a blank canvas begging for some fabrication genius. Problem is my fabricating skills are far short of 'genius level' so I'm mapping out how I am going to make useful and nice looking use of that space.

The battery is back there (in a box of course) - with that I see a sub woofer box, two 6x9's, and maybe a storage area for a 'roadside emergency kit'. When I quit staring and get busy I will set the seats on the cab to make sure I'll have the space for what I ultimatley decide to do...then back out with the seats and on with the 'fabricatin'

Won't be long before I quit thinking about it and start doing it....I suppose

[Daze57]

whoa --- dem is some very nice seats !

[Dan in Pasadena]

Lookin good. If it were mine I'd be REAL excited. Is it dark gray or black but hard to see in the photo?

[Daze57]

thank you very much youngrodder - gonna try it out on my 57

[beanyard]

I lost the bid on some reallllly nice windshield stainless trim. OEM not repro... so if any of you out there have a nice set please let me know.... I was way looking forward to getting it. I am trying to round up all the small stuff so that when the wife and I decide to go forward with a paint job we don't have a whole slew of unplanned expenses.

I guess my 3g phone doesn't have a chance with last min buidding wars. Too bad I can't touch ebay while at work or I would have used my PC and won.
Posted via Mobile Device

[rollinrooster]

Finished up my brake lines on the frame.

[Dan in Pasadena]

Beautifully done sir.

[rollinrooster]

Originally Posted by Dan in Pasadena

Beautifully done sir.

Thanks, this was my first time doing brake lines.

[Dan in Pasadena]

Originally Posted by rollinrooster

Thanks, this was my first time doing brake lines.

Eek! Really?! Now I'm REALLY impressed. I'd have thought you were an old hand.

How'd you do it? Please explain.

I've heard of using coat hangers as templates and making subtle radii like over your rear end by rolling tubing over round objects. What did you do? I will need new lines on my truck but had wondered if I wouldn't just EFF it up? Have you pressurized them? Much in the way of leaks and please tell us what equipment you had?

[rollinrooster]

Originally Posted by Dan in Pasadena

Eek! Really?! Now I'm REALLY impressed. I'd have thought you were an old hand.

How'd you do it? Please explain.

I've heard of using coat hangers as templates and making subtle radii like over your rear end by rolling tubing over round objects. What did you do? I will need new lines on my truck but had wondered if I wouldn't just EFF it up? Have you pressurized them? Much in the way of leaks and please tell us what equipment you had?

Thanks man, a very good friend of mine that owns a street rod shop (PrecisionRod&Custom) let me borrow some brake line tools and gave me some advice. He just told me to try and keep everything straight and follow the frame / weld lines. I bought 25' rolls of 3/16" and used his straightner and a kick butt hyd. flaring tool. What helped me more than anything is he told me " you have to have a starting point and an ending point" this would help me to lay the lines out and measure the length that i needed. I have heard of people using coat hangers / welding wire as templates but he told me that was just a waste of a good coat hanger or welding wire and to just measure and mark the brake line with a sharpie where i want to bend it at. I havent pressurized them yet due to waiting to install the cab for the final time.I have a 90° brake booster setup that goes under the dash and my brake lines will go inside the cab.

[Daze57]

beanyard

what year truck do you have ?
i might have what you need

[beanyard]

Originally Posted by Daze57

beanyard

what year truck do you have ?
i might have what you need

I am sending you a pm
Posted via Mobile Device