The 60-66 "PAYING IT FORWARD" thread! - Page 18 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Rusty63 · 01-21-2018, 09:33 PM

Have in cab gas tank,with sender,and mounting plates with straps from 63 c-10,no rust and came out in one piece,not sure of sending unit shape,had old fuel in it and haven't pulled the sender out to check,am going with rear sub tank..

Rpederson46 · 01-27-2018, 07:03 PM

I have aset of four 15" three-clip 6 lug wheels off 66 Chevy C10 located Santa Fe NM. Also brake drums and parts that are as old as truck. I suspect that shipping is prohibitive.

LVPhotos · 01-29-2018, 12:42 PM

Under seat jack mount, spare mount parts.
BTW, who collecting bolts? I came across a can full I pulled.

**allchevy58** · 01-29-2018, 11:18 PM

2 Exhaust brackets off a 64' C30. Shipped from 89508.

**slepysal** · 01-30-2018, 12:00 AM

Quote:

Originally Posted by LVPhotos

Under seat jack mount, spare mount parts.
BTW, who collecting bolts? I came across a can full I pulled.

I ll take the jack mount Shipping to Ca 95112 ?

**slepysal** · 02-02-2018, 01:31 AM

passing on under seat jack mount

Tom bunch · 03-13-2018, 03:37 PM

Quote:

Originally Posted by Rusty63

Have in cab gas tank,with sender,and mounting plates with straps from 63 c-10,no rust and came out in one piece,not sure of sending unit shape,had old fuel in it and haven't pulled the sender out to check,am going with rear sub tank..

Will the tank fit 64 gmc if so how much you asking for it include shipping thanks in advance
Posted via Mobile Device

Rusty63 · 03-13-2018, 06:31 PM

Hi Tom,sorry i don't have the tank any more,forgot to update the post...Darren

**pimpston65** · 03-13-2018, 06:36 PM

Quote:

Originally Posted by PMDc

Radiator from 1962 C-10 235 6-Cyl Manual Transmission

My local radiator shop wanted $675 to re-core it due to the many leaks and previous repairs done so I ordered a new one.

I hate to throw it away if someone has a use for it.

Located in Auburn, IN

You pay shipping 26.5lbs, Box is oversize for UPS 9"x31"x34"

did anyone take u up on the radiator? if not whats shipping to 48206 thanks...

Tom bunch · 03-15-2018, 01:38 AM

No problem thanks for the reply back

msg · 03-18-2018, 04:05 PM

Embarrassed to post what I have after seeing all the great stuff everyone else is offering, but there are some scraps from repairing my 66 that I was going to haul off but if anyone who is making some minor patches could use any of this stuff let me know. Just pay shipping from my zip 30263. The top pic is the repro patch panel scraps and below is the sandblasted original scraps.

**allchevy58** · 03-25-2018, 09:05 PM

Have a floor mat out of my 64 C30, good condition, two rips by e-brake handle, spare tire holder, radiator, was not leaking, installed aluminum radiator and sill plates, not dinged up or rusted. Shipped from zip 89508.

**allchevy58** · 03-25-2018, 09:06 PM

Here's sill plates. shipped from zip 89508.

**allchevy58** · 03-25-2018, 09:12 PM

Also have a west coast mirror bracket, right side, I took off 64 C30, didn't match left side. Shipped from zip 89508.

Larry64 · 03-25-2018, 09:37 PM

I will take the under bed tire carrier Shipped to 37091

Bentbolt · 03-25-2018, 10:37 PM

Quote:

Originally Posted by Tom bunch

Will the tank fit 64 gmc if so how much you asking for it include shipping thanks in advance
Posted via Mobile Device

I have a tank and sender I would let go. I bought the truck and drove it home 3.5 hours, it holds gas. Send me a pm and we can work it out

oem4me · 03-26-2018, 12:37 AM

Quote:

Originally Posted by allchevy58

Have a floor mat out of my 64 C30, good condition, two rips by e-brake handle, spare tire holder, radiator, was not leaking, installed aluminum radiator and sill plates, not dinged up or rusted. Shipped from zip 89508.

Interested in both the radiator and the floor mat. If you give me a size and weight, I can send you a prepaid UPS shipping label. Would this work? Thanks, - Bruce

Larry64 · 03-26-2018, 08:39 AM

I will take the Jack hold down parts. Shipped to 37091

Pontiacgurudan · 03-26-2018, 07:52 PM

I'll take the sill plates shipped to 63052 if still available.

**allchevy58** · 03-26-2018, 09:07 PM

Quote:

Originally Posted by Larry64

I will take the under bed tire carrier Shipped to 37091

I'll check shipping cost and let you know.

**allchevy58** · 03-26-2018, 09:14 PM

[QUOTE=oem4me;8221903]Interested in both the radiator and the floor mat. If you give me a size and weight, I can send you a prepaid UPS shipping label. Would this work? Thanks, - Bruce[/QUOTe
Hi Bruce, I'll box it up and let you know. Cameron

**allchevy58** · 03-26-2018, 09:15 PM

Quote:

Originally Posted by Pontiacgurudan

I'll take the sill plates shipped to 63052 if still available.

Still available, I'll let you know. Thanks

Larry64 · 03-26-2018, 09:20 PM

Thanks. PM me the cost & how to pay you.

**allchevy58** · 03-28-2018, 11:09 PM

Quote:

Originally Posted by Larry64

I will take the under bed tire carrier Shipped to 37091

Shipping comes to $40.82 USPS.

**allchevy58** · 03-28-2018, 11:14 PM

Quote:

Originally Posted by Pontiacgurudan

I'll take the sill plates shipped to 63052 if still available.

Shipping comes to $14.24.

01-21-2018, 09:33 PM	#426
Rusty63 Registered User Join Date: Sep 2017 Location: Kincardine,Ontario Posts: 80	Re: The 60-66 "PAYING IT FORWARD" thread! Have in cab gas tank,with sender,and mounting plates with straps from 63 c-10,no rust and came out in one piece,not sure of sending unit shape,had old fuel in it and haven't pulled the sender out to check,am going with rear sub tank..

01-27-2018, 07:03 PM	#427
Rpederson46 Registered User Join Date: Apr 2017 Location: Santa Fe Nm Posts: 10	Re: The 60-66 "PAYING IT FORWARD" thread! I have aset of four 15" three-clip 6 lug wheels off 66 Chevy C10 located Santa Fe NM. Also brake drums and parts that are as old as truck. I suspect that shipping is prohibitive. Attached Images

01-29-2018, 12:42 PM	#428
LVPhotos Registered User Join Date: Jan 2013 Location: Las Vegas, NV Posts: 1,857	Re: The 60-66 "PAYING IT FORWARD" thread! Under seat jack mount, spare mount parts. BTW, who collecting bolts? I came across a can full I pulled. Attached Images __________________ 1962 shortbed 408cui small block, TKO 600 5-speed, bagged Porterbuilt suspension. 18" Salt Flats http://www.cardomain.com/ride/332579...t-c-k-pick-up/ http://67-72chevytrucks.com/vboard/s...d.php?t=560081

01-29-2018, 11:18 PM	#429
allchevy58 Senior Member Join Date: Aug 2011 Location: Reno, Nv. Posts: 1,437	Re: The 60-66 "PAYING IT FORWARD" thread! 2 Exhaust brackets off a 64' C30. Shipped from 89508. Attached Images __________________ 1927 Willy's Knight 24,000 original miles, 1958 Impala 283/Powerglide, 1971 Monte Carlo 350/350, 1972 GMC K2500 350/350, 1976 Chev. K10 350/350, 2006 GMC Sierra 2500HD LBZ Duramax/Allison, 2006 Chev. Silverado K3500 LBZ Duramax/Allison

02-02-2018, 01:31 AM	#431
slepysal Registered User Join Date: Oct 2006 Location: San Jose NOR*CAL Posts: 3,080	Re: The 60-66 "PAYING IT FORWARD" thread! passing on under seat jack mount __________________ 1960 Apache long bed fleet L6 250 Clifford intake 2 bbl carb. Langdon cast headers with dual exhaust and bellflower tips. T-5 5 speed, power steering and power disc brakes. "Over, Around or through it... "

03-13-2018, 06:31 PM	#433
Rusty63 Registered User Join Date: Sep 2017 Location: Kincardine,Ontario Posts: 80	Re: The 60-66 "PAYING IT FORWARD" thread! Hi Tom,sorry i don't have the tank any more,forgot to update the post...Darren

03-15-2018, 01:38 AM	#435
Tom bunch Registered User Join Date: Mar 2018 Location: Kentucky Posts: 2	Re: The 60-66 "PAYING IT FORWARD" thread! No problem thanks for the reply back

03-18-2018, 04:05 PM	#436
msg Registered User Join Date: Feb 2013 Location: GA Posts: 1,313	Re: The 60-66 "PAYING IT FORWARD" thread! Embarrassed to post what I have after seeing all the great stuff everyone else is offering, but there are some scraps from repairing my 66 that I was going to haul off but if anyone who is making some minor patches could use any of this stuff let me know. Just pay shipping from my zip 30263. The top pic is the repro patch panel scraps and below is the sandblasted original scraps. Attached Images __________________ Progress thread for my 66 http://67-72chevytrucks.com/vboard/s...d.php?t=623848

03-25-2018, 09:05 PM	#437
allchevy58 Senior Member Join Date: Aug 2011 Location: Reno, Nv. Posts: 1,437	Re: The 60-66 "PAYING IT FORWARD" thread! Have a floor mat out of my 64 C30, good condition, two rips by e-brake handle, spare tire holder, radiator, was not leaking, installed aluminum radiator and sill plates, not dinged up or rusted. Shipped from zip 89508. Attached Images __________________ 1927 Willy's Knight 24,000 original miles, 1958 Impala 283/Powerglide, 1971 Monte Carlo 350/350, 1972 GMC K2500 350/350, 1976 Chev. K10 350/350, 2006 GMC Sierra 2500HD LBZ Duramax/Allison, 2006 Chev. Silverado K3500 LBZ Duramax/Allison

03-25-2018, 09:06 PM	#438
allchevy58 Senior Member Join Date: Aug 2011 Location: Reno, Nv. Posts: 1,437	Re: The 60-66 "PAYING IT FORWARD" thread! Here's sill plates. shipped from zip 89508. Attached Images __________________ 1927 Willy's Knight 24,000 original miles, 1958 Impala 283/Powerglide, 1971 Monte Carlo 350/350, 1972 GMC K2500 350/350, 1976 Chev. K10 350/350, 2006 GMC Sierra 2500HD LBZ Duramax/Allison, 2006 Chev. Silverado K3500 LBZ Duramax/Allison

03-25-2018, 09:12 PM	#439
allchevy58 Senior Member Join Date: Aug 2011 Location: Reno, Nv. Posts: 1,437	Re: The 60-66 "PAYING IT FORWARD" thread! Also have a west coast mirror bracket, right side, I took off 64 C30, didn't match left side. Shipped from zip 89508. Attached Images __________________ 1927 Willy's Knight 24,000 original miles, 1958 Impala 283/Powerglide, 1971 Monte Carlo 350/350, 1972 GMC K2500 350/350, 1976 Chev. K10 350/350, 2006 GMC Sierra 2500HD LBZ Duramax/Allison, 2006 Chev. Silverado K3500 LBZ Duramax/Allison

03-25-2018, 09:37 PM	#440
Larry64 Registered User Join Date: Sep 2011 Location: Lewisburg, TN Posts: 315	Re: The 60-66 "PAYING IT FORWARD" thread! I will take the under bed tire carrier Shipped to 37091 __________________ Never drive faster than your Guardian Angel can fly Larry Last edited by Larry64; 03-26-2018 at 08:36 AM.

03-26-2018, 08:39 AM	#443
Larry64 Registered User Join Date: Sep 2011 Location: Lewisburg, TN Posts: 315	Re: The 60-66 "PAYING IT FORWARD" thread! I will take the Jack hold down parts. Shipped to 37091 __________________ Never drive faster than your Guardian Angel can fly Larry

03-26-2018, 07:52 PM	#444
Pontiacgurudan Registered User Join Date: Feb 2017 Location: Desoto mo Posts: 106	Re: The 60-66 "PAYING IT FORWARD" thread! I'll take the sill plates shipped to 63052 if still available.

03-26-2018, 09:14 PM	#446
allchevy58 Senior Member Join Date: Aug 2011 Location: Reno, Nv. Posts: 1,437	Re: The 60-66 "PAYING IT FORWARD" thread! [QUOTE=oem4me;8221903]Interested in both the radiator and the floor mat. If you give me a size and weight, I can send you a prepaid UPS shipping label. Would this work? Thanks, - Bruce[/QUOTe Hi Bruce, I'll box it up and let you know. Cameron __________________ 1927 Willy's Knight 24,000 original miles, 1958 Impala 283/Powerglide, 1971 Monte Carlo 350/350, 1972 GMC K2500 350/350, 1976 Chev. K10 350/350, 2006 GMC Sierra 2500HD LBZ Duramax/Allison, 2006 Chev. Silverado K3500 LBZ Duramax/Allison



Register or Log In To remove these advertisements.

03-26-2018, 09:20 PM	#448
Larry64 Registered User Join Date: Sep 2011 Location: Lewisburg, TN Posts: 315	Re: The 60-66 "PAYING IT FORWARD" thread! Thanks. PM me the cost & how to pay you. __________________ Never drive faster than your Guardian Angel can fly Larry

Register or Log In To remove these advertisements.