GRIZZ’s English 2001 S10 Extra Cab 4.3 V6 Truck

[Grizz1963]

So mate Fil came down from Cambridge this morning at 10.00 to play and possibly sleep over, though he had a work appointment at 09.00 tomorrow.

Seems yellow is the operative colour at this point.



Of course it was Grizzmas too…….

Gifts.



He also brought some industrial flooring for the S10 which he originally named as the Rumblegrizzkin.

Some money was exchanged for top secret parts with Sally.

These small grids weigh 15kg each…….



And then he unloaded the Sip welder NeilDD had gifted the two of us with.

And with my welder temporarily out of action (we hope) and the Rezin Rockit chassis needing a small patch, and some gussets welded in, it was just perfectly time.



The generosity of this amazing community never ceases to make me feel humble and fortunate, or blessed, whichever way you want to see it.



I will update the work Fil and I did today in the morning, after bootfair.


In the mean time, the Canary is out of its cage.









Excited, YES.

.

[Palf70Step]

Looking forward to your photo shoot of the Miata.

[Grizz1963]

Originally Posted by Palf70Step

Looking forward to your photo shoot of the Miata.

Delivery moved to Monday, lets hope he manages to get it done tomorrow

Yes, there will be a few photos for the record of course.






So, on with reporting the rest of yesterdays work.

I really went at a reasonably slow pace, deliberately as it is great actually visiting with friends and getting stuff done, rather than the usual flat out pace to just get a job done.

Fil is great company and comes up with some great ideas, like the voices in my head.

After all, he named the S10 as Rumblegrizzkin.

So the first job that needed doing and needed two sets of hands, was to remove the body table we put the Jeep body on two weeks ago.

Lift rear, fit taller box under floor to then free rear of table, lift front, fit a pair of axle stands either side, and a 2x4 on them, put body down, slide table out.

Easy Peasy.

So while I did some other stuff like gathering tools, finding coach screws, Fill cut the four legs off the table.



Then drill pilot holes for the,wheels, zip in the coach screws with Mr Rattle gun.



Once the rolling table was done, we got the body back onto it, tried it out with the two steering trolley wheels in,front, moved it about to test……



Then things got silly just before we went in for some coffee and toast.

Fil fetched Glen’s spare glassless screen frame and we grabbed a broomstick, the RX8 drivers seat…..….. oh, and some wheels and hey presto.



Got in, cautiously



Steering wheel needs to be lower and a touch further away from the driver.



Then Fil got a turn to sit in the drivers seat, and we tilted the screen back a bit, as the plan was to cut it shorter and fit new glass, but this may work, depending on how the ex-56 Chevy roll cage/hoop from @pauly may force my hand on the aesthetics department if I cannot tilt it back to follow the body/B-pillar, screen and seat line.






Next job was to get the canvas ready for the sand blasting of the frame, and then moving the frame onto the axle stands, on there.

Planning.



Once placed, the wheels came out again.



Tally-Ho Mo-Fo’s !!!




And finally ready to start blasting as soon as the air dies in the morning.



Wish me luck with the compressor and enough air volume.

[Grizz1963]

Public holiday today, means we had a long weekend, which means two bootfairs, one yesterday and one today.

Yesterday was massive, and delivered nothing for me, a few ornamental plates for Craigs new house and Sally got a very pretty teapot and milk jug and sugar pot for her own use.

Today she had gone to do overtime.

I was awake at 03.50 and ended up chatting with Dennis as I could not get back to sleep.

Bootfair was much smaller, and again not really anything spectacular as I was really just looking for a Cherry Bomb exhaust, as I have seen at least two over time, usually around the £5.00 to £10.00 mark

However, I did find a super sized wheel spanner/ or wheel brace for £2.00 that had to come home, as I have a new home in mind for it.

And six new, unused coffee mugs, 50p each or £2.00 for all of them. Guess I paid £2.00 then.

Same guy had the massive dice or is it die and the pretty wooden box.

Box for Sally, and dice may become a gearknob on the Rezin Rockit.





.

And in other News, while rummaging in the big shed (large tools like engine hoist, engine stand, metalfolder, cab trolley etc) to get the canvas out for the media blasting on the Rezin Rockit chassis, a rather heavy part of the cab trolley steel slipped where I had it propped on top of another item and bypassed the patented Grizz Toeteckters. Thankfully a drop of no more than 200mm

Not at all sore or debilitating, guess I got lucky. This time.



And then much more importantly, I am awaiting with much excitement the delivery of a canary.

Think back to the miners who carried a canary into the mines to monitor noxious gasses underground.

In effect, the canary was SACRIFICED to save the miners lives.

Nothing that dramatic here.

But our own KevFromWales on RetroRides is hopefully on his way in a 300 mile delivery trip to bring me a donor for the Rezin Rockit

Story here: https://forum.retro-rides.org/thread...-rockit-yellow

I always wanted a yellow car…….

Today will be a slow/fast day.

.

[Grizz1963]

So yesterday was not wasted.

But it certainly will be filed under Fail.

I used more PPE than I have ever done, including gloves, hoody and shoes.

What’s the world coming to?



Using the blasting pot that @pauly had lent to me, after struggling an hour to find the right hose connector it soon became apparent that a combination of “lack of,air” and a very thick layer of sprayed on under-seal and two layers of red oxide and some strong paint, meant that I was not getting a fast outcome.



Leaving me with this sort of result, a really good clean steel surface,,alternating with underseal that it struggled to knock off.



You can see how thick it is applied.



It Necessitated this old guy, along with safety eyewear and gloves.



To,scrape off as much of the thick layers of paint and sealer. In some places the paint is not,shifting,very easily either.

Hopefully the blaster will help.



This is a slow, laborious job, but I think it will be the right way to do it.



Loads more to,do, but it too will come to an end.


.

[Grizz1963]

Forgot add this

https://youtube.com/shorts/XBkRSdpQXHo?feature=share

What it looked like.

[Grizz1963]

[font size="7"][font color="e619de"]ONE YEAR OF REZIN ROCKIT ALREADY [/font][/font]

I was amazed to see this thread was started August 28th.last year.

So today KevFromWales as he is known, or Kev delivered the Canary to be sacrificed all the way from Wales, bringing it 290 miles.

We spent three hours inspecting various parts of my shop,

Unloading the MX5, messing around and eating dinner that Sally had gone and cooked for us as she saw we were having a great time catching up, it’s been a while.

So photos.

From upstairs.



Zoooooommmm….Zoom




Up close it is rough as a badgers butt.

Perfect.





There was nothing wrong here, Kev just wanted to show me the simple wiring loom and where it ran.





Then untying the car, as a qualified Tat-Hauler and trailer driver, Kev had this thing so strapped down, you could not shake iff in a week of Sundays.

Do note the rear lights and bumper, accidental damage while getting out of its barn resting place.





Rust? Who said rust….?

License plate lights, a tad loose.



Paint?



Close up.




There will be a few bits for sale if any interest.

Heated rear glass roof, has damage to thecanvas, but maybe the glass can be transferred



Internal wind deflector, these work real well.





We also made a movie…….

Includes a moment of madness and a small burnout.

CLICK THE VIDEO LINK.


https://youtu.be/YgX-rsBErjU


Once done in the street, the canary was brought through into the back yard, followed by the S10 .





So a 4 day weekend, where I did very little today, but overall, the weekend delivered.

Back to work tomorrow.

[Palf70Step]

Nice little canary Rian

[Grizz1963]

Originally Posted by Palf70Step

Nice little canary Rian

Not so sure, but will test all of it to see if the bits I want, work.

The rest will comeback as a refrigerator or AK47

[Grizz1963]

I forgot to mention, the super sized wheel brace I got at the bootfair and a large, magnetic Green Doctors strobe light managed to find their way into KevFromWales 525 diesel.

One for drifting, one for trucking.



When he left, trailer in tow, the wheels seemed to be rotating like a cat on a slippery floor that had just clocked an angry Chihuahua

And a plume of black diesel smoke that darkened the already darkened sun some more.



Both front wheel arches look like this on the Mazda.



And the rear is worse, showing a previous MOT standard repair, rotten through again.



I also washed the car this morning, as dirty is less attractive in a car, than a hot date.

Back to work today, full steam ahead.

More later.

[Grizz1963]

So this morning I went and took a proper look at what I had bought as a donor for this build.

It seems this was a California, limited edition then.

The interior is a mess, with the good, original seats having been swapped for a pair of worn items, not bolted down, just thrown in there.

Perfect for when it comes to stripping looms etc.

Checked the engine fluids etc, all good and the oil seems very clean.



Not yet looked at the owners service book etc, which is actually in the car, it will be nice to add to the build as part of the history.

So, I decided it was time to wash it, before 08.00 using a broom and some Domestos toilet bleach gel.

Rear end is mullered as it was rear ended by Kevs truck, pushing it.





Front end improved from yesterday.





Better for sure.



Late afternoon, after work I went to sit and started the car up, after adding 5 liters of lawnmower fuel into the very empty tank.

So I decided to do a walk around and check lights, indicators, oil pressure, temperature etc.

Click video link:

https://youtu.be/-IA9yyN-ADI


I still need to look at more of the car as I get time.

Still happy this will be good.

Though the 1600’s 109bhp compared to the 138bhp of the,1800cc engine makes me wonder if I,will,be happy with that, or need to fit a Turbo……

Loads to do before that though.

[Grizz1963]

Scrape

Scrape

Scrape

SCRAPE


VIDEO:

https://youtu.be/rlGTtdPWPBI


It would seem I am spending 2-3 hours scraping that bloody chassis every night as the blasting was not shifting the hardened combination of red oxide, some very tough grey paint and the hardened underseal all over it.

I am sure a commercial blasting unit, with large, heavy duty blasting system would clear it in a couple of hours, but that would involve a trailer, towing and delivering it and the front and rear running gear and a small hand full of cash. So not happening.

Of course, typically, there are so many nooks and crannies and the texture keeps changing.





Also removed the brake and fuel lines in order to make progress a bit smoother, another angle grinder job as half the screws holding the saddles in place were rusted solid, or closed the heads up with rust, some responded to hammer on the screwdriver, which I managed to destroy.



Inbetween I have also been looking at other things and started to remove bits for others.

Roof did not seem to want to open more than this, what a ball ache to remove the wind deflector from behind the two loose seats, without forcing or damaging the roof with it’s heated rear glass.



Out.



Madness though……

By 7.00pm last night, I had only managed to strip back about 1/3 of the chassis on three sides, once the top is completed, it needs to be turned over and the underside done.

Followed by blasting and paint with the primer Kevin gave me.



And then the fun part……..

Clean this lot before rebuilding.



Friday, day job, then two days of weekend, where I hope to get on with this job.

[Grizz1963]

[quote author="@misteralz" source="/post/2695927/thread" timestamp="1630754166"]Noooooo! Flap wheels are too good at removing metal as well. Stick with the knotted wheel. [/quote]

Too late.

I have two going into battle.

115 mm

125 mm

And a ton of 125 discs in coarse humour.

Will try to modulate and not annihilate the chassis.

Andyes, I just removed the protection as it may allow some easier access.




So I tried to use the flap disc, not ideal in this case.



The heat and frequency/speed of the grinder just melted the underseal…….



So I switched to @pauly ‘s Knotwheel of truth tm



Soon it looked like this, I pulled a few spikes out of my wrists, flung into my skin at 12000rpm



The only rust I want to cut out on the frame (most people will pass it by, but I think getting it done is a better option)



Next up was a late linch, and I ran down to Tool station, only to be told hey had no knotwheels but if I drove another 10 miles or 16km there was stock.

Screw that was my response, so I went to two other shops, including a builders hardware where they did not even know what I wanted.

So I came home and asked my one lodger to use his Amazon Prime to order me £30.00 worth of knotwheels in flat and cup shaped .

Then I went out to carry on and used my last cup shaped wheel.



These knot wheels certainly work better and faster than the scraping, and do not get into all the tight spots.

Leaving me with another dead one and a total of 9 pricks in my skin.



Bootfair in the morning, maybe I will get lucky and find a knotwheel or two….. that would be cool.

.

[Grizz1963]

Bootfair was slim today, loads of junk that should be taken for lanfill.

Craig got another Ninja Turtles VW bus for his random VW aircooled collection, as well as the Coca Cola drum. £3.50

Sally got an unused, like new picture frame and some motorbikes for Harry total £1.50

I got her a pair of coat hooks for £1.00

And I got myself a large naval flag for £2.50 (not yet sure what to do with it)





.

Just had coffee and toast.

Decided to take the day off the Rezin Rockit as I do not have any more knotwheels until,Amazon delivers, and spend it with Sally the patient saint.

With the harvesting recently the S10 had gotten as dusty and grubby as anything, as has Sallys car.

So first thing is wash both cars, then vacuum them out.

Then we can go out in the truck, looking forward to a nice drive in that.

And go look for a super sized range cooker for her and replacement washing machine for my house, this ones bearings are grumbling a bit, so it will be consigned to scrap or if someone can use it in a workshop for overalls, rags etc, then that would be a good place for it.

[Grizz1963]

So today I took the day off with Sally.

Bootfair, followed by washing her Corsa and the S10. Then off to the appliance store.

I need a new washing machine, my typical brand is Beko, and I tend to stick with simple function 8-10kg machines.

Tha last one lasted over 10 years, and still works, only problem is the handle on the door has become partially resistant to opening, and my lodger nearly has a melt down when he has to do his laundry.

So I tried to order one instore…….. NOPE no stock.

Sally spent her motorbike and recycled stainless steel finds, buying a new cooker for £740.00 delivered, ouch. But she is happy.

We were home by 13.30, lunch, then Sally put a chair out in the sun and I grabbed a couple of bonus hours on the Rezin Rockit.

But not before her youngest came to show off his freahly MOT tested Corsa.

I like small cars……..



So down to the garage and onto the rear axle, plan was to scrape old paint, rust off.

Messy.



Eventually ready for a bit of media blasting.





David, the current longer term Lodger was having a cigarette in the garden and took a short clip too.

I have a shortage of air, and I suspect there may have been a blockage in the line that @pauly will explain later.

https://youtu.be/P-1YH6wbwww

Once again, weekend over, and to be honest, though I got a lot less achieved than intended, it was a good weekend.

Week ahead is a touch busy, so little progress expected.

[Grizz1963]

So today I managed to get some paint on after work.

Plan was a bit of red to go with the black out back, or even grey/gray but @pauly said it was too 80’s



And this tag for those who read and decipher tags.



In the end, I decided to go black all over.

Happy so far.



Tonight I also found my Amazon order out front, part 2 to be delivered later this week.\



I now need to order a set of bushes for the front and rear.

Found these, and they seem to cover pretty much everything, except the rear Anti Roll Bar bushes in the selection

At £150.00-ish probably a decent price for Poly Bushes, but I am wondering if a full set of original rubber parts can be found.




So some progress again today, unexpected as it was.

Next up, front suspension…….

[Grizz1963]

Made some time after work tonight to get going on the front end scraping.

What a horrible job.



Very messy too, and looks like it is badly damaged.



Actually not too bad,



Closed shop at 7.55 as bad light stopped play.

Hopefully get more time tomorrow night, weather permitting.

At least it has progressed.

[Grizz1963]

With running out of daylight last night I was ready to start again at 04.00 but of course decent light only comes at 6.30-ish

So I was out there by 07.00 and spent about an hour finishing the tops and front/rear surfaces.

Today I have two big training meetings and also have to do the day job.

I am also expecting a visitor from the deep South near Southampton with a gift offered me in September/October last year.
So @alpina99 will be headed here thos afternoon after work to drop off said gift.
With the Canary sitting waiting to have its heart torn out for the Rezin Rockit Resurrection it will probably be easier having an overhead gantry and block n tackle.

Once done with the day job today I will go flip the whole crossmember over, clean the underside followed by a quick run over with a wire brush and airline.
Followed by a coat of black Hammerite paint on one side, then flip it over and do the other side.

I will not be doing or cleaning the springs or shock absorbers as they need to be replaced outright with better and shorter items once I figure how short we can go.


Morning progress





And of course while down there cleaning, I was reminded thatboth front and rear brakes are damaged and missing things like a calliper and backing plate here, who knows what else.

The rear end is no better. With a hub and possibly brake parts missing off one side.





Fun. Real Fun this has become.

Just takes time.

[Grizz1963]

So during the late afternoon Nigel @alpina99 popped in, as you do, from Southampton (well nearby it)

He came up to visit and to drop off the carrier for the block and tackle he offered me for the carport, and to use when the MX5 engine ends up being torn from the canary.





We spent some great time together, mostly sitting chatting down at the carport which proved to be a great reception area, which still would not have been enough, had we been given 10 hours, discussing all sorts of things, from life and death to Spain, America, Karma and being kind to others.

Eventually he had to leave on his trip home to Mrs Alpina99 and I went out to inspect his current new to him, whip, an E39 BMW or as he explained to me, a 5 series. As I am not good with this numbered car thing.

As a retired prison officer of 30 years, he certainly makes the car look like a 3 series.

A few subtle upgrades make it just right.



I have to say, I was totally smitten with the wheels, and had we had more time, I would have wanted to try them on the S10 truck.



After work, I went down to carry on with cleaning the front subframe and suspension.

Again, I did not clean the springs or shock absorbers as they will be replaced.

It took a long time too, finishing what I had not managed to complete this morning, followed by flipping it over and starting on all the under side and invisible paint.

Hell, I hated this job.

Top side eventually done.



Flipped over



Before



After



And at 7.00pm tonight, thankfully Sally had come around and cooked dinner, allowing me to finish.

I started the compressor up and used the blower nozzle to really blow all the scraped paint and rust and dust out of all the nooks and crannies.




Happy with that finish.

Paint next.

[Grizz1963]

Facebook just reminded me this morning.


It was a year ago that mate Fil collected this “car” for me in Scotland.


So Bill shot over to the body shop where the Rezin Rockit was stored along with mate Gordon




Finding the Eagle in the back of the yard.




Lots of green and garden











Moving it included a dead lift by Bill and Gordon to get it away from the wall.



Gordon Man-Legend




Car ready

[Grizz1963]

So today I created about 75 minutes early morning……

Followed by stealing some time this afternoon from work, clocking out at 4.00pm

So I painted the once side, then the other, taking one wheel off at a time to create easier access.

At this point I ran out of paint this morning…….

I sis not paint the springs or shocks as I am planning to add shorter springs and shocks, if I can find them, or else follow the teachings of the master @pauly and call in Mr Grinder for a loop or two.



So at lunchtime, taken at 4.00pm I ran into the village and got lucky, the local hardware guy, normally overpriced, had 1 liter of smooth Black Hammerite for £20.00 which is what B&Q charge for 750ml

Then back home and straight into finishing off the painting, and adding touch up and a second coat on parts of the structure.

Done.

Top side.



Bottom view.



I am contemplating going for vented Ford Capri 2.8 front discs and callipers.

And then of course my good mate JB Mathews in Oklahoma challenged me today, asking if the MX5 brakes and discs could not be transfered.

So there is tonights challenge question.


Ready for me to buy the Poly Bushes needed for the rebushing.




Looking for something else for work today, I found this little rocket pic.

Reminded me that I still want or need to create a logo for the Rezin Rockit



Original




One year later this is getting better every day for me.

Lockdown and working from home is not ideal.

Therapy I guess.

[Grizz1963]

So the Rezin Rockit is due for a full Polybush makeover.

https://forum.retro-rides.org/thread...in-rockit-year

So this is a kit available from floflex https://floflex.co.uk/product/cortin...set-inc-x-mem/

Cost is £152.00 plus shipping, probably £160.00 landed.

I have looked at the parts and tried to identify and align the various bushes with parts of the front and rear suspensions and crossmember

I have failed……

Has anyone done this swap before and used these products?

If so, based on this photo from the advertising online, can you identify where they,go ?



And related to this as far as I can see, the rear has a 16mm Anti Roll Bar which I do not believe has bushes in the kit.







So question no 2 for anyone who knows their Fords……….

Is there a bush kit, or way to replace these bushes?

The one is a double with the one side having a 12mm bolt keeping it in place, the outer diameters are 25 and 30mm for the two ends where they are bushed.


Any advice, thank you.

[Grizz1963]

In other news

Dennis’ birthday today.

Not the best of dates since 9/11

Today is his best mate Roger’s (since age 5 years old) Burnout party.

So the truck which he got back out this week after the last catastrophic self destruction was tested this week and held together.



Love the helmet and cup holders in a race truck.

800 plus horsepower from a Hendricks NASCAR motor.



So last night it was loaded for the 30 mile trip down i70 to Rogers place as it has not yet been inspected and registered or insured.




Looking forward to reports later from Dennis.


His comment after his local test drive to Mittler Brothers.

The truck is a tribute to the late Mike Mittler, a good friend, whose NASCAR trucks Dennis did all the bodywork for over the years.

They all came out and took a bunch of pictures of it. Mike's brother even came out and shook my hand
It's not a very street friendly truck. It does not want to go slow.
It doesn't like low speed and low rpm's as long as you are giving it gas and driving it hard it drives fine. Deb said I guess we can't take it on a Sunday afternoon drive. Well that depends on how fast of a Sunday afternoon drive you want.

So lets see if the truck survived today.

.

[Palf70Step]

Rian, you aught to make ole red a sister/brother truck to Dennis'. Couple ole NASCAR trucks ripping up the neighborhood.

[Grizz1963]

Originally Posted by Palf70Step

Rian, you aught to make ole red a sister/brother truck to Dennis'. Couple ole NASCAR trucks ripping up the neighborhood.

Imagine that.

Problem here is both my extremely limited knowledge and zero support.

But it would be awesome.





Today I really did not want to go to the bootfair, as I only got about 4 hrs sleep in broken episodes, and was tired from the time on the chassis yesterday.

But a 4.30 am alarm had me awake, and up just after 5.00

So I went anyway.

First blood to @Craigrk wife, and second blood too.

Plates for their new home in Shropshire which is known as The Stables. £3.50 for the plates.



She asked me to keep an eye out for a less common item……..got lucky.



The rest of the bootfairs bounty was collected within the first half of the field.

Picture frame, unused £2.00
Socks 50p
Small yankee candle 20p
Seeing eye 50p
Pile up sanding discs (I still have the attachments) £1.00
35 foot or 10 meter rubber reinforced airline £2.00
Large wooden Buddha for Sallys garden £4.00
Ornate cat for the garden £2.00
Plastic coat hangers £1.00
Stick of rock £- Free



So ultimately not too bad.

Airline alone made it worthwhile for me.


And unfortunately I do not know how to download video from FB.

But a few pics of Dennis’ truck doing what it was built to do at Rogers garden party.

Some of you may remember that Roger built a concrete strip for burnouts and short drag launches a few years ago.

Any of his friends are allowed to pop in and burn some money (rubber)






Being 9/11 and Dennis’ birthday, the flag had to come out too of course.

Driving over Rogers pond/lake wall after the burnout.



Full Hendricks NASCAR race motor and all 2015 season truck under the skin.

Amazing build and detail.








If I can figure how to get a video saved from FB I will and load to YouTube.

Back to the Rezin Rockit today.

Hopefully get chassis painted both sides.

Later guys.