OR 100's of misc parts from the last 6 trucks parted out

[swamp rat]

This is the color.. but like mentioned if you have a lighter green I'd consider it too if its close to Medium green.

[beetle1960]

Gauge cluster available?
Posted via Mobile Device

[flyingcubby]

Tom, Just a quick question during your busy time, but by chance do you have a transfer case skid plate for a 71 blazer?...Thanks for your time. Mike

[Wide_Nalgas]

by any chance, im looking for: 1972 P.Steering Gearbox with pitman-arm complete with hardware (p.steering upgrade)??

[buddylj1990]

do u got the CARBS if so any of them the rochester 4gc

[RetiredUSAF]

I will take the 2wd automatic trans cross member. Do you have a 71-72 gas pedal and hardware?

[69GMC1500]

I would like to buy the GMC eyebrow (lh and rh )chrome trim for $15 per side if its still available and will fit a 69. Pm me address for mailing money order and total shipped, I'm in Rapid City South Dakota.
Posted via Mobile Device

[tll74]

Originally Posted by NC_John

How about an exhaust manifold (I saw some in one of the pics) for a '70 350? I need the LH side- PN 39322473. Shipping to 28138, NC.

thanks.

I just sold the one in the pic to another member. I'll look for a match to it.

Originally Posted by beetle1960

Gauge cluster available?
Posted via Mobile Device

Originally Posted by flyingcubby

Tom, Just a quick question during your busy time, but by chance do you have a transfer case skid plate for a 71 blazer?...Thanks for your time. Mike

I might have one. I'll look.

Originally Posted by Wide_Nalgas

by any chance, im looking for: 1972 P.Steering Gearbox with pitman-arm complete with hardware (p.steering upgrade)??

Complete SBC 72 P/S pump assy. 60.00 plus shipping

Originally Posted by buddylj1990

do u got the CARBS if so any of them the rochester 4gc

No carbs at this time.

Originally Posted by RetiredUSAF

I will take the 2wd automatic trans cross member. Do you have a 71-72 gas pedal and hardware?

Yes I have the 71-72 gas pedal assy. 20.00 plus shipping

Originally Posted by 69GMC1500

I would like to buy the GMC eyebrow (lh and rh )chrome trim for $15 per side if its still available and will fit a 69. Pm me address for mailing money order and total shipped, I'm in Rapid City South Dakota.
Posted via Mobile Device

I have sold one side or the other local I'll look.


Sorry guys for delayed reponse. Recently had a week vacation and then my work sent me out of town for a few days. Just now getting time to catch up online.
Thanks, Tom

[TBONE1964]

Hey Tom,

Maybe I can help with the photo downloads. I think they are/have reduced the size of the photo file you can download. Here is what you need to do:

The instructions are for Windows 7 but should work on other programs as well.

Right click on the photo and select "open with"
select "paint"
At this time your photo will display with a tool bar above. This is the paint tool bar.
From the tool bar you should see "resize"
Select "resize and a window will pop up and show percent or pixels.
Select "pixels and change the number to 450 and select "save"

You should now be able to download that pic on to the site. Once you do this a couple of times it will be a piece of cake. let me know if you need more help.

[JimH2828]

Tom, I see you have the turquoise seat belts on hold for the wife. I have two frame mount rear view mirror bracket covers you may be interested in. I forget if 68 mirrors come off the frame or glass. I bought the top two thinking they were blue, as it's hard to tell when they are by them selves.



-JimH2828

[BIGCAT19]

I would like to purchase these items if you still have them. I didn’t see sold next to the items at the beginning or the thread. I can do PayPal or mail a cashier’s or personal check which ever you prefer. To figure out shipping my Zip code is 56701 Thief River Falls, MN.

Pic 3
67-72 GMC RH chrome headlamp bezel nice 17.50
RH GMC eyebrow minor ding nice driver 15.00
LH GMC eyebrow ding lower corner DQ 15.00
Pic 4
3 tail lamp wiring harnesses for lwb (from cab to bumper) 15.00 each
I’ll take one if it will work on my ’67 GMC Long Box Wood floor?

[BIGCAT19]

Originally Posted by BIGCAT19

I would like to purchase these items if you still have them. I didn’t see sold next to the items at the beginning or the thread. I can do PayPal or mail a cashier’s or personal check which ever you prefer. To figure out shipping my Zip code is 56701 Thief River Falls, MN.

Pic 3
67-72 GMC RH chrome headlamp bezel nice 17.50
RH GMC eyebrow minor ding nice driver 15.00
LH GMC eyebrow ding lower corner DQ 15.00
Pic 4
3 tail lamp wiring harnesses for lwb (from cab to bumper) 15.00 each
I’ll take one if it will work on my ’67 GMC Long Box Wood floor?

Since I can't edit my previous message I figured I would do this:
I would only be interested in these items if you still have them.
Pic 3
67-72 GMC RH chrome headlamp bezel nice 17.50
Pic 4
3 tail lamp wiring harnesses for lwb (from cab to bumper) 15.00 each
I’ll take one (1) if it will work on my ’67 GMC Long Box Wood floor?

[buddylj1990]

do u got the zbar or also called bell crank for clutch linkage its the v8

[JWSmith]

I need one coil spring cup that goes on the trailing arms on my 70 shortbed. When loosening to put on my drop coils i broke the nut that is welded to the cup so now i cant bolt the cup down. Do you have any of these?
Posted via Mobile Device

[1cool69]

I was wondering if you had any high humps?thanks

[tll74]

Originally Posted by BIGCAT19

Since I can't edit my previous message I figured I would do this:
I would only be interested in these items if you still have them.
Pic 3
67-72 GMC RH chrome headlamp bezel nice 17.50
Pic 4
3 tail lamp wiring harnesses for lwb (from cab to bumper) 15.00 each
I’ll take one (1) if it will work on my ’67 GMC Long Box Wood floor?

Yes on both 42.00 shipped on both.

Originally Posted by buddylj1990

do u got the zbar or also called bell crank for clutch linkage its the v8

Yes, 37.00 shipped

Originally Posted by JWSmith

I need one coil spring cup that goes on the trailing arms on my 70 shortbed. When loosening to put on my drop coils i broke the nut that is welded to the cup so now i cant bolt the cup down. Do you have any of these?
Posted via Mobile Device

Yes I do nice ones that have been media blasted and ready for some paint. 13.00 shipped

Originally Posted by 1cool69

I was wondering if you had any high humps?thanks

Yes, 50.00 plus 18.00 shipping.

Thanks, Tom

[BIGCAT19]

Originally Posted by tll74

Yes on both 42.00 shipped on both.

Yes, 37.00 shipped

Yes I do nice ones that have been media blasted and ready for some paint. 13.00 shipped

Yes, 50.00 plus 18.00 shipping.

Thanks, Tom

Tom, Let me know how you want me to pay you for the $42.00 and I'll get my address and payment over to you. Thanks, Brandon (BIGCAT19)

[greyno3]

Still have the firewall side heater housing faded but in excellent cond. 35.00 plus shipping?

Will it fit a '72 w/o AC?
?? shipping to Spokane wa, 99205

[greyno3]

Can't edit so, Do you have a '72 gas pedal assembly w/hardware too?

[Homebuilt Hotrods]

I'm looking for a steel box floor section. very small section as outlined in photo. Drivers side just forward of the wheel well. If you have one that's rust free, ill take it pending cost. Let me know paypal or money order.

[1cool69]

any pictures of the high hump?thx

[tll74]

Originally Posted by Homebuilt Hotrods

I'm looking for a steel box floor section. very small section as outlined in photo. Drivers side just forward of the wheel well. If you have one that's rust free, ill take it pending cost. Let me know paypal or money order.

Yes, no problem. 20.00 plus shipping. Let's say 13.00 shipping.

Originally Posted by 1cool69

any pictures of the high hump?thx

I looked and don't have one removed. I have about 10 of them still in trucks.

Thanks, Tom

[1cool69]

let me know when you have one removed. 50.00 plus 18.00 shipping. sounds good. thanks

[greyno3]

I am still interested on the firewall heater housing w/o AC & '72 gas pedal assembly???

[tll74]

Originally Posted by greyno3

Still have the firewall side heater housing faded but in excellent cond. 35.00 plus shipping?
Do you have a '72 gas pedal assembly w/hardware too?

Not sure if I have that one still. If not I know for sure that I have a nice one for 40.00 and a 71-72 gas pedal assy for 25.00 plus 19.00 shipping for both.

Originally Posted by Keating121

Do you still have an ash tray? My 67 has straight tracks, will yours fit and work? And is the cigarette lighter the entire assembly and available?

Yes 20.00 plus 8.00 shipping for a 67 only ash tray. 15.00 for a the 67 only cigarette lighter assy.

Originally Posted by 1cool69

let me know when you have one removed. 50.00 plus 18.00 shipping. sounds good. thanks

Ok..I'll pull one Monday.


Thanks Guys, Tom