71' (gonna be) a one of a kind custom

[BossHogg69]

Things are coming together nicely - that engine looks awesome and your powdercoater is a BEAST!!!

[71' Custom]

Originally Posted by swamp rat

That just looks way too nice!

Originally Posted by BossHogg69

Things are coming together nicely - that engine looks awesome and your powdercoater is a BEAST!!!

Thanks guys, in the next two weeks or so I will be starting the ignition system. I did test fit the headers and they fit beautifully. That was a huge sigh of relief for me. So the headers will be going on permanently soon too. That means exhaust will be on the table soon too. It feels like I can almost see the finish line just over the horizon!

[71' Custom]

I just love my wheels!

I should be finally ordering a bunch of parts tomorrow. Mainly ignition parts (distributor and wires)

[Hankster]

Them wheels look cool!

[71' Custom]

Finally, parts!



I will have the secret weapon installed soon, stay tuned!

[71' Custom]

Say hello to the secret weapon

[BossHogg69]

Is that one of those fancy carb spacers that adds 150hp?

[71' Custom]

Originally Posted by BossHogg69

Is that one of those fancy carb spacers that adds 150hp?

You know it!

I had to give the solenoids and brackets a paint job.


I put the smallest jets in it to start. Still a 100 shot though!

[swamp rat]

I can hear the evil laughter now...

[71' Custom]

Originally Posted by swamp rat

I can hear the evil laughter now...

Haha, the evil laughter will be much easier to hear early next month! I don't know if I have already said what I am going to be doing carb wise yet, but it will be really nice!

....... ok, I can't take it! It is going to be the MSD Atomic EFI!

And I have plans for it too

....... ok ok, it will be getting a custom powder coating job too.
Geez I just can't keep a secret,

[71' Custom]

Thinking about changing directions with the build....

[TexasLS1]

Oooo, uhhhh... Yeah um, nice...

Edit: I will say, that was a lot of work to get the fenders and hood created and lined up,

[swamp rat]

Originally Posted by 71' Custom

Haha, the evil laughter will be much easier to hear early next month! I don't know if I have already said what I am going to be doing carb wise yet, but it will be really nice!

....... ok, I can't take it! It is going to be the MSD Atomic EFI!

And I have plans for it too

....... ok ok, it will be getting a custom powder coating job too.
Geez I just can't keep a secret,

Told ya so..

Um, donno where you found that other truck picture but... It hurt my eyes.

[71' Custom]

Originally Posted by swamp rat

Told ya so..

Um, donno where you found that other truck picture but... It hurt my eyes.

Lol, someone posted it on Facebook with the caption,"Meth, not even once"

[71' Custom]

Ok guys, I need some help here. I recently found out when I looked up my 1:6 rocker arms, somehow I chose some for a small block ford. Now I have heard of ford guys using Chevy rockers but never heard of it vice versa. They seemed fine when I installed them but I am not 100% sure what problems it may cause. Any suggestions / ideas?

[swamp rat]

Originally Posted by 71' Custom

Ok guys, I need some help here. I recently found out when I looked up my 1:6 rocker arms, somehow I chose some for a small block ford. Now I have heard of ford guys using Chevy rockers but never heard of it vice versa. They seemed fine when I installed them but I am not 100% sure what problems it may cause. Any suggestions / ideas?

I could only suggest, talk to Edelbrock about it, talk to the rocker company and ask how they are different.

What comes to mind is make sure the rocker tips are centered on the valve stems, and the push rods don't contact the heads. Could the push rods from chevy and ford have a different radius on the ends? in other words if the end of the push rod was larger or smaller than the cup on the rocker it could wear badly.

[71' Custom]

Originally Posted by swamp rat

I could only suggest, talk to Edelbrock about it, talk to the rocker company and ask how they are different.

What comes to mind is make sure the rocker tips are centered on the valve stems, and the push rods don't contact the heads. Could the push rods from chevy and ford have a different radius on the ends? in other words if the end of the push rod was larger or smaller than the cup on the rocker it could wear badly.

I did just that, contacted Edelbrock first. They were amazed that they even bolted up, and they said pretty much the same thing; if they center up on the valve and the push rod isn't making contact with the head I should be good. So I contacted Summit next and they said they wouldn't recommend taking the risk. So they told me to package them up best I could and return them for an exchange! I had even told them they were installed! I have to give it to Summit, they are awesome when it comes to taking care of their customers! I removed them last night, luckily I still have all of the packaging that they came in. However, Edelbrock does not make a 1:6 rocker for a Chevy so I will be replacing them with a set of Lunati arms. Such a load off of my mind! I could only imagine what would have happened had I not accidentally looked at the box those arms came in, I really need to be more careful in the future. What makes this so shameful for me is I work in a parts department! Looking up parts is my profession, I should have caught that before I ordered them.

[swamp rat]

Thumbs up for Summit! Hey you caught it before break in, its all good!

[roushinator]

Nice Work!!!

[71' Custom]

Originally Posted by swamp rat

Thumbs up for Summit! Hey you caught it before break in, its all good!

Yeah, those guys at Summit are awesome!

Originally Posted by roushinator

Nice Work!!!

Thanks!

The Atomic EFI should be here Monday and the replacement rockers on Tuesday.
Now I am facing a decision; If I have th TB powder coated, only the side plate and the fuel rails can be coated, the body itself will have to be painted. Now the design will be like the rest of the engine, black with the MSD and raised lines in blue. The only blue on it will be on the side plate and fuel rails though. My concern is if I pant the body and coat the other parts, is the black from the body to the other parts being off color from each other. The other problem, my powder coater I have does such a fantastic job but isn't the fastest. I really want to have this engine cranked within the next month or so and I can't do that if the powder coater has my fuel rails. I figure if I am going to have him do it, I will have to give him a time limit to have it done. Then hope he sticks to it, lol

[71' Custom]

Well, bad news. There will be no powder coating on the throttle body. Turns out the plate on the side has the ECM attached to it. Spray painting it would be next to impossible with all the sensors and wiring in the way. Hand painting it would be the only option and I do not think that would look very good. So for now it will just have to stay the way it is. I did get my new rockers today and started to install them. Getting back on track now. Next up is the dampener and a few miscellaneous parts.

[71' Custom]

So close to being able to start this puppy. I can almost hear it!

[swamp rat]

Well, guess they didn't offer the unit in black then.

Ya know what once you start the engine you'll forget about the color.

['68 Newtricks]

Mind taking a couple close pics of your upper shock mounts in front? And I was surprised that you didn't have to notch the frame for the steering rack, thought it needed a little. Nice, that's a good thing.

[71' Custom]

Originally Posted by swamp rat

Well, guess they didn't offer the unit in black then.

Ya know what once you start the engine you'll forget about the color.

Ya, I wish they would have offered it in black. That would have been nice. I have a feeling it won't be too noticeable once it is all said and done. I found out the other day there is a new brand of injection available for half the price of the MSD. It is called FiTech and comes in black. Wish I would have known about that a few weeks ago.

Originally Posted by '68 Newtricks

Mind taking a couple close pics of your upper shock mounts in front? And I was surprised that you didn't have to notch the frame for the steering rack, thought it needed a little. Nice, that's a good thing.

I will take some pictures of them in the morning for ya. They are nice, I like them a lot. I still am not sure they were worth that much money though, lol. I probably wold not have installed that kit if I had to notch the frame any more than I did. All in all I am really happy with that rack kit though. No Limit was definitely the way to go.