Project Vitamin C-10 - Page 18 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

4dranch · 01-22-2009, 08:37 PM

Alan,,
Thanks for the updates, I can already see your truck on the cover of them fancy magazines.

How far are you away from Dalton Ga.? keep the informational post coming.
David

Alan's Classic · 01-23-2009, 01:00 AM

Quote:

Originally Posted by shortbed70

So did you weld the seam on the side of the bed? I am wanting to do this to clean it up.

Yes, I welded all of the gaps. It took a while, but I think it will be well worth it.

Quote:

Originally Posted by 4dranch

Alan,,
Thanks for the updates, I can already see your truck on the cover of them fancy magazines.

How far are you away from Dalton Ga.? keep the informational post coming.
David

Thanks David. That would be nice to see it in print, well see. I'm a little over an hour from Dalton I think. I'm about 15 minutes south of Jasper.

This is what me and sdailey got done tonight. We sprayed the inside of the cab back panel with the sprayable seam sealer. It actually turned out great.
It took 2 tubes and that was barely enough. I wish I had one more to get it a little thicker. It looks thick but if you look on the paper you can get an idea of how much is actually on it.

Taped up

Finished texture

aggie91 · 01-23-2009, 11:14 AM

I am just curious, why did you use a sprayable seam sealer on the entire back wall fo the cab? Is it for sound deading properties or ??

Looking good, I just wish I had half your skills....

Anyway, you are making me wish my shop was done (its not even started yet) so that I could work on my '65...

custom63 · 01-23-2009, 03:18 PM

Awesome work Alan! Keep up the good work and keep those pics a flowin.

MacAttack · 01-23-2009, 05:45 PM

That cab spray is fantastic. Great texture!

Mac.

Alan's Classic · 01-23-2009, 08:07 PM

Quote:

Originally Posted by aggie91

I am just curious, why did you use a sprayable seam sealer on the entire back wall fo the cab? Is it for sound deading properties or ??

Looking good, I just wish I had half your skills....

Anyway, you are making me wish my shop was done (its not even started yet) so that I could work on my '65...

I did it mainly to cover the back side of my welds on the cab corners since I was too lazy to dress them down.

It is also a good sound deadener and looks alot better than dyamat. Thanks for the compliment.

Quote:

Originally Posted by custom63

Awesome work Alan! Keep up the good work and keep those pics a flowin.

Thanks and you know I will.

Quote:

Originally Posted by MacAttack

That cab spray is fantastic. Great texture!

Mac.

*LILRED66* · 01-23-2009, 08:12 PM

Alan strikes again...nice work.

Alan's Classic · 01-23-2009, 11:01 PM

Quote:

Originally Posted by LILRED66

Alan strikes again...nice work.

Thanks Tony

I struck a pretty good deal I think on this aluminum radiator that a friend of mine took out of his 72 Chevelle. Now I have to figure out how to mount it. Hey Shannon you got an old 67-72 core support and top radiator hold downs still?

4dranch · 01-23-2009, 11:05 PM

Nice score Alan,
Ooh and if anyone could fab some supports and hold downs it's you.

BuiltByBrooks · 01-23-2009, 11:09 PM

Lookin really good!!

sdailey · 01-23-2009, 11:10 PM

Quote:

Originally Posted by Alan's Classic;3104273

I struck a pretty good deal I think on this aluminum radiator that a friend of mine took out of his 72 Chevelle. Now I have to figure out how to mount it. Hey Shannon you got an old 67-72 core support and top radiator hold downs still?

[IMG

http://i369.photobucket.com/albums/oo140/cooters1/1965%20Chevy%20C10%20Build/DSC08585.jpg[/IMG]

Why yes I do. I even have an OE radiator if the aluminum one doesn't work out.

Alan's Classic · 01-23-2009, 11:12 PM

Quote:

Originally Posted by sdailey

Why yes I do. I even have an OE radiator if the aluminum one doesn't work out.

Is it rusted out I need it for parts.

Alan's Classic · 01-23-2009, 11:13 PM

Quote:

Originally Posted by 4dranch

Nice score Alan,
Ooh and if anyone could fab some supports and hold downs it's you.

I got something in mind.

4dranch · 01-23-2009, 11:17 PM

I never doubted that for a minute.

Alan's Classic · 01-23-2009, 11:18 PM

Quote:

Originally Posted by Morbid Fabrication

Lookin really good!!

sdailey · 01-23-2009, 11:20 PM

Quote:

Originally Posted by Alan's Classic

Is it rusted out I need it for parts.

I have my original one that you can scrap if needed. I also have the one that came off the '72 that you/we got from Chris, but I'll probably keep that one for myself.

Alan's Classic · 01-23-2009, 11:22 PM

Quote:

Originally Posted by sdailey

I have my original one that you can scrap if needed. I also have the one that came off the '72 that you/we got from Chris, but I'll probably keep that one for myself.

Is it the one that is leaning up against the cab?

protrash64 · 01-24-2009, 02:02 AM

QUOTE from Alan's Classics........

I struck a pretty good deal I think on this aluminum radiator that a friend of mine took out of his 72 Chevelle. Now I have to figure out how to mount it. Hey Shannon you got an old 67-72 core support and top radiator hold downs still?

I've got some bungee cords laying around here, but you'd have to pay shipping

.

...nice work on the cab.

Alan's Classic · 01-24-2009, 10:09 AM

Quote:

Originally Posted by protrash64

I've got some bungee cords laying around here, but you'd have to pay shipping

.

...nice work on the cab.

Thanks man, I'll keep you in mind if my plan fails. Do those bungee cords come with a roll of duct tape?

protrash64 · 01-24-2009, 10:34 AM

......didnt think of the 'tape'.

..........seriously, nice work on the the truck.

joe231 · 01-24-2009, 11:55 AM

1966gmc · 01-24-2009, 08:52 PM

All I have to say is Holy crap!! I just spent the last 2 hours reading this thread. You do some amazing work man. Keep up the good work!

Alan's Classic · 01-24-2009, 11:43 PM

Quote:

Originally Posted by 1966gmc

All I have to say is Holy crap!! I just spent the last 2 hours reading this thread. You do some amazing work man. Keep up the good work!

Thanks man. I'm just amazed that I could entertain someone for 2 hours straight.

Alan's Classic · 01-25-2009, 06:51 PM

Making progress on the project that is keeping me from progress on my truck.
It's getting close to completion.

CSoliz · 01-25-2009, 07:17 PM

Alan, I had an idea for my gas tank supports. And since it seems you want to put a speaker back there I thought I would share with you. I plan on making a speaker box in roughly the same shape as the gas tank. I figured it was long enough to put maybe a 8" or 10" speaker in the middle and mount the amp on the box to the right of the straps and a capacitor on the left. I also planned on using the gas tank straps to hold it in place. I want to use the old velvet and resin trick to smooth it out nice so it can be painted to match the interior. Haven't done it yet, but that is the plan anyways.

01-22-2009, 08:37 PM	#426
4dranch Shloooooong bed member #2 Join Date: Aug 2008 Location: Millington Tn. Posts: 1,864	Re: My 1965 build thread Alan,, Thanks for the updates, I can already see your truck on the cover of them fancy magazines. How far are you away from Dalton Ga.? keep the informational post coming. David __________________ *David,* Daughters 66 truck: http://67-72chevytrucks.com/vboard/s...d.php?t=484601 Learning to drive a 3 on the tree: http://www.youtube.com/watch?v=CcCMvRgBo1Q

01-23-2009, 11:14 AM	#428
aggie91 I'm just glad to be here! Join Date: Jan 2008 Location: Longview, TX Posts: 4,788	Re: My 1965 build thread I am just curious, why did you use a sprayable seam sealer on the entire back wall fo the cab? Is it for sound deading properties or ?? Looking good, I just wish I had half your skills.... Anyway, you are making me wish my shop was done (its not even started yet) so that I could work on my '65... __________________ Karl 1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues) http://67-72chevytrucks.com/vboard/s...d.php?t=372424 The LST Challenge: http://67-72chevytrucks.com/vboard/s...=1#post7812257 Korbin's 1st Square: "Sunburn" http://67-72chevytrucks.com/vboard/s...d.php?t=418618 1985 GMC Sierra: "White Trash", Korbin's 2nd now... http://67-72chevytrucks.com/vboard/s...d.php?t=632305 Henry - 1984 Chevrolet, Owen's 1st Square Last edited by aggie91; 01-23-2009 at 11:14 AM.

01-23-2009, 03:18 PM	#429
custom63 Registered User Join Date: Oct 2008 Location: Auburn, Ca. Posts: 171	Re: My 1965 build thread Awesome work Alan! Keep up the good work and keep those pics a flowin.

01-23-2009, 05:45 PM	#430
MacAttack 283 Drama Queen Join Date: Dec 2004 Location: Surf City, CA Posts: 2,435	Re: My 1965 build thread That cab spray is fantastic. Great texture! Mac. __________________ For about 12 years of my adult life I had a severe speech impediment. My ex-wife never let me get a word in edgewise.

01-23-2009, 08:12 PM	#432
LILRED66 Account Suspended Join Date: May 2005 Location: Kansas City, KS Posts: 3,906	Re: My 1965 build thread Alan strikes again...nice work. Last edited by LILRED66; 01-23-2009 at 08:12 PM.

01-23-2009, 11:05 PM	#434
4dranch Shloooooong bed member #2 Join Date: Aug 2008 Location: Millington Tn. Posts: 1,864	Re: My 1965 build thread Nice score Alan, Ooh and if anyone could fab some supports and hold downs it's you. __________________ *David,* Daughters 66 truck: http://67-72chevytrucks.com/vboard/s...d.php?t=484601 Learning to drive a 3 on the tree: http://www.youtube.com/watch?v=CcCMvRgBo1Q

01-23-2009, 11:09 PM	#435
BuiltByBrooks Argon User Join Date: Oct 2008 Location: Qc, AZ Posts: 353	Re: My 1965 build thread Lookin really good!!

01-23-2009, 11:17 PM	#439
4dranch Shloooooong bed member #2 Join Date: Aug 2008 Location: Millington Tn. Posts: 1,864	Re: My 1965 build thread I never doubted that for a minute. __________________ *David,* Daughters 66 truck: http://67-72chevytrucks.com/vboard/s...d.php?t=484601 Learning to drive a 3 on the tree: http://www.youtube.com/watch?v=CcCMvRgBo1Q

01-24-2009, 02:02 AM	#443
protrash64 Resistance is Futile Join Date: Dec 2006 Location: Mesa,Arizona Posts: 3,520	Re: My 1965 build thread QUOTE from Alan's Classics........ I struck a pretty good deal I think on this aluminum radiator that a friend of mine took out of his 72 Chevelle. Now I have to figure out how to mount it. Hey Shannon you got an old 67-72 core support and top radiator hold downs still? I've got some bungee cords laying around here, but you'd have to pay shipping. ...nice work on the cab. __________________ 64 CHEVY PICK-UP > http://67-72chevytrucks.com/vboard/s...otrash+re-hash 64 CARRYALL >http://67-72chevytrucks.com/vboard/s...=1964+suburban 66 LB >http://67-72chevytrucks.com/vboard/s...d.php?t=427852 STRENGTH/DETERMINATION/MERCILESS/FOREVER .......posted via stationary device Last edited by protrash64; 01-24-2009 at 02:04 AM. Reason: ..screwd up

01-24-2009, 10:34 AM	#445
protrash64 Resistance is Futile Join Date: Dec 2006 Location: Mesa,Arizona Posts: 3,520	Re: My 1965 build thread ......didnt think of the 'tape'. ..........seriously, nice work on the the truck. __________________ 64 CHEVY PICK-UP > http://67-72chevytrucks.com/vboard/s...otrash+re-hash 64 CARRYALL >http://67-72chevytrucks.com/vboard/s...=1964+suburban 66 LB >http://67-72chevytrucks.com/vboard/s...d.php?t=427852 STRENGTH/DETERMINATION/MERCILESS/FOREVER .......posted via stationary device

01-24-2009, 11:55 AM	#446
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: My 1965 build thread __________________ *CHEVY ONLY*

01-24-2009, 08:52 PM	#447
1966gmc Why does it taste purple? Join Date: Sep 2007 Location: Cambridge Md Posts: 621	Re: My 1965 build thread All I have to say is Holy crap!! I just spent the last 2 hours reading this thread. You do some amazing work man. Keep up the good work!

01-25-2009, 06:51 PM	#449
Alan's Classic 1 thing at a time is progress. Join Date: Jun 2007 Location: Ball Ground GA Posts: 5,511	Re: My 1965 build thread Making progress on the project that is keeping me from progress on my truck. It's getting close to completion. __________________ Alan Philippians 2:14-16 Alan's Classic Facebook page. North Georgia Group Project 1965 Vitamin C-10 1995 GMC Sierra K1500 The "Wrecker"

01-25-2009, 07:17 PM	#450
CSoliz Torn between 66 and 78 Join Date: May 2008 Location: So. Cal. Posts: 253	Re: My 1965 build thread Alan, I had an idea for my gas tank supports. And since it seems you want to put a speaker back there I thought I would share with you. I plan on making a speaker box in roughly the same shape as the gas tank. I figured it was long enough to put maybe a 8" or 10" speaker in the middle and mount the amp on the box to the right of the straps and a capacitor on the left. I also planned on using the gas tank straps to hold it in place. I want to use the old velvet and resin trick to smooth it out nice so it can be painted to match the interior. Haven't done it yet, but that is the plan anyways. Last edited by CSoliz; 01-25-2009 at 07:18 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.