68' Chevy c10

[litew8]

Nice job John! Bet they look even better in person.

[chapster]

Those gauges turned out great, really love where you build is going!

Keep it up...
Posted via Mobile Device

[jlsanborn]

Hey John, any movement this weekend?? Thanks for the encouragement over on my page, I really appreciate it!! Your skills here are pie-in-the-sky for me and really something I strive for on my build. Thanks for doin it and showing us all how! I'll expect a link when you start the Chevelle thread on that site!

Couple more for ya!

[jlsanborn]

Nice! So the clock is going in the cluster? What else did you order?

[XxCHEVYMANxX]

Originally Posted by jlsanborn

Nice! So the clock is going in the cluster? What else did you order?

Thanks Johnny ! the clock will go in the cluster where the vac gauge would go. as far as the orders, here goes...
LH door latch mech, chrome door lock knobs, vent window repair kit,(already have all my rubber seals) ignition bezel, lower door carpet, sun visors, dash knob bezels, turn signal lever, ash tray/glove box bumpers, glove box insert, lower steering column bearing. I think I have an Ice Machine sold ! as soon as that deal is sealed, I can get my 5 lug axles, brake drums, master cyl. prop valve, power steering pump/brackets/hoses. after all that I'll only need a windshield, stereo, and maybe some wheels down the road.

[jlsanborn]

Exciting! You'll have to share your vent window adventure. I pulled mine from the doors and stashed them away. The rubber kit I got from GMC Pauls comes with new rubber bits, but I haven't looked any further into it or ordered the repair kit. Not sure If I need it???

[FrankieD]

Originally Posted by XxCHEVYMANxX

I can get my 5 lug axles, brake drums, master cyl. prop valve, power steering pump/brackets/hoses. after all that I'll only need a windshield, stereo, and maybe some wheels down the road.

John you might save some coin if you get the rear axles, drums, backing plates and brakes from a 71 or 72 that is what I did on my 70. The only thing I bought new was the shoes, spring kit and new axel bearings just so there wasn't any failure later down the road

[Low Elco]

Checked the Facebook page- I bow to the master! That's nice work!
Posted via Mobile Device

[Low Elco]

Just went through the whole thing, this is gonna be really nice. Hope you get some exterior shot before the snow flies!
Posted via Mobile Device

[XxCHEVYMANxX]

Originally Posted by litew8

Nice job John! Bet they look even better in person.

Thanks Man ! thats why I took so many pics of it, and I just cant capture how it looks in person. lol

Originally Posted by chapster

Those gauges turned out great, really love where you build is going!

Keep it up...
Posted via Mobile Device

Thank you sir !

Originally Posted by jlsanborn

Hey John, any movement this weekend?? Thanks for the encouragement over on my page, I really appreciate it!! Your skills here are pie-in-the-sky for me and really something I strive for on my build. Thanks for doin it and showing us all how! I'll expect a link when you start the Chevelle thread on that site!

Couple more for ya!

Thanks Johnny ! not much done this weekend. I love this site ! havent been a member for very long, but everyone here seems like one giant family. willing to help out with problems or encouraging words to keep us motivated. On another note, I was thinking of putting the chevelle pics I have in the "alternate tinkerings" thread.

Originally Posted by Low Elco

Checked the Facebook page- I bow to the master! That's nice work!
Posted via Mobile Device

Hahaha ! I wouldnt go that far, but thanks Man I appreciate the kind words.

Originally Posted by Low Elco

Just went through the whole thing, this is gonna be really nice. Hope you get some exterior shot before the snow flies!
Posted via Mobile Device

Thanks again ! you and me both brother ! this time of year here the temps are all over, highs range from 45 - 75. I just need to be at the ready.lol

[XxCHEVYMANxX]

Finally ordered LEDs for gauges and dome light. I'll be putting in a couple more parts orders today ! also picked up a clock out of a mid 80s chevy truck from the boneyard yesterday.... $7.50 and it works too.

[XxCHEVYMANxX]

ordered my other parts, from Classic Parts of America, and a few from LMC. have to save up a little more cabbage then I can put in an order to CPP !

[jlsanborn]

Found this.....

http://67-72chevytrucks.com/vboard/s...d.php?t=351471

[XxCHEVYMANxX]

Thanks Man ! now I know where to look.lol

[XxCHEVYMANxX]

Wow ! I never knew this guy is my neighbor. I can see his shop from my back yard. Always wondered who was revin up those monster motors.
http://burkhartchassis.com/gallery.html

[FrankieD]

Originally Posted by XxCHEVYMANxX

Wow ! I never knew this guy is my neighbor. I can see his shop from my back yard. Always wondered who was revin up those monster motors.
http://burkhartchassis.com/gallery.html

Time to make a friend

[longbed67]

I'm doing my vent windows now.... They suck! nuff said!

[nuke1]

Truck is looking really nice, I really dig the leafing. good job!!

[XxCHEVYMANxX]

Originally Posted by nuke1

Truck is looking really nice, I really dig the leafing. good job!!

Thanks Man! Looking at your sig, you've got a few irons in the fire ! I read thru the Havoc build up to the part where they said you cant drive it. what a load of BS ! Hope you can get that turned around.

[jlsanborn]

Ordered my repair kit and am going today to grab a little more paint. If I can get the mess cleaned up, I'll tear down my vent windows tonight. We can do this and make it easier for the next guy!

[XxCHEVYMANxX]

Originally Posted by jlsanborn

Ordered my repair kit and am going today to grab a little more paint. If I can get the mess cleaned up, I'll tear down my vent windows tonight. We can do this and make it easier for the next guy!

Avatar change, Nice ! so you did need the repair kit after all. seems like with some patience, and following some guidelines the vent window thing would be simple. I just doubt it will be though. keep me updated Johnny.

Brown truck should be here today ! I post pics of all the goods !!

[jlsanborn]

Originally Posted by XxCHEVYMANxX

Avatar change, Nice ! so you did need the repair kit after all. seems like with some patience, and following some guidelines the vent window thing would be simple. I just doubt it will be though. keep me updated Johnny.

Brown truck should be here today ! I post pics of all the goods !!

Have'nt dug in yet, but I'm guessing the sucky part is staking down them rivets all pretty-like with the jiffy little tool they give you. Other than that, what could be soo tough???

[FrankieD]

have the new rubbers for my vents they came with the truck but when I stripped the 72 they were a PIA to get out I don't want to think about it.

[jlsanborn]

So the little black rubber thing..... Best I can tell its one of them sealing boots for a bat type toggle switch???? No idea. More hints!

What else did you get? What's the carpeted piece? There's sumthin else in a blue and white baggie there on the left.

[XxCHEVYMANxX]

Originally Posted by jlsanborn

So the little black rubber thing..... Best I can tell its one of them sealing boots for a bat type toggle switch???? No idea. More hints!

What else did you get? What's the carpeted piece? There's sumthin else in a blue and white baggie there on the left.

I got the visors from Classic Parts, I'm happy with 'em. the door latch control is in the b/w bag. thats lower door carpet, got it from LMC because I already had carpet from them. dash nob bezels, turn signal lever, and lower steering column bearing also from LMC. and yeah the rivet tool is a POS !

As for the black thing I can say it's 10 times bigger than a toggle switch boot.

I have to take one of my dogs to the vet this morning. his paw is real swollen around his claw. when I get back it's back to fitting the clock, and cutting tach hole. then I can get the tin painted, also the clock hands.