My 56 build

[Tempest67]

that is a beauty, keep at it

[Jason 56]

Originally Posted by dsraven

looks really good. curious, what is thatbig box above the drivers front wheel, does it have clearance for the tire to go through a full suspension travel with the wheels turned to the right? looks tight in the pics but then pics can do that.
I like the color combo, looks rich.

It’s where all the engine electronics are housed. The fuse panel bolts to the inside of the cover. All you see is the wire loom entering the fender. There’s about 8” of clearance. So no problem with the static suspension.

[dsraven]

great idea on the electrical box, thanks for the pics.
HAPPY NEW YEAR!

[dsraven]

is your fuse/relay panel in there too? good access to work on it if required?

[8man]

I just went through your build, and it is awesome. Some real thought and skill went into it. Glad I found it.

[8man]

Did you use the Specialty Power Windows kit? If not, which one did you use and is it working well for you?

Also, I've seen a couple of one piece window kits that have the glass with them, what kit did you use for the one piece and did a local glass company cut the window?

Thanks.

[Jason 56]

Originally Posted by 8man

Did you use the Specialty Power Windows kit? If not, which one did you use and is it working well for you?

Also, I've seen a couple of one piece window kits that have the glass with them, what kit did you use for the one piece and did a local glass company cut the window?

Thanks.

Yes they are Specialty Power Windows. Kit is from classic parts. I got my side window glass and seals from Vintage Glass: Balls Rod and Kustom.

[Jason 56]

Originally Posted by dsraven

is your fuse/relay panel in there too? good access to work on it if required?

Yes, it’s in there too. There’s a cover to the box. The panel bolts to the inside of the cover. So the panel can be pulled out. You can see the 4 screw heads in the picture. It’s snug, but well ventilated.

[Kevin_C]

its really coming together. Color looks great

[6DoF]

good lord, those colors look even better as it's going together

[Jason 56]

Funny story… I was reading another post on the forum. It was mentioned to make sure your windshield fits if you are replacing the upper eyebrow area over the window. That was about a month ago. So I’ve been sweating a little. I’m nearly ready to install my new windshield in its new hole that hasn’t been fitted. After some thought I decided to install the old seal on the windshield and cut both the inner and outer lip seals off. Just left me with the windshield as it should sit without the rubber pulling on it. With much relief everything fit. soon to be installed permanently!

[Jason 56]

Otherwise I’ve been wiring for about 2 weeks now. Getting cliose to finishing that. Airbox is also installed.

[my56chevytruck]

Originally Posted by Jason 56

Otherwise I’ve been wiring for about 2 weeks now. Getting cliose to finishing that. Airbox is also installed.

great job Jason, all your pics show great work, detail and perfection. Again, great job.

[Jason 56]

Radiator and fan are installed. Finished the a/c system. Dryer is installed and it’s ready for a charge.

[Jason 56]

Installed the windshield and rear glass this weekend. Hands are sore, but they’re in. Now that the glass is in it's starting to look like a truck! Working on the doors next.

[57FleetsideC4]

Originally Posted by Jason 56

Installed the windshield and rear glass this weekend. Hands are sore, but they’re in. Now that the glass is in it's starting to look like a truck! Working on the doors next.

Looks really nice!! How much help did you have on the glass?? I am not looking forward to installing the glass and my front has the stainless trim. I am afraid of breaking the windshield installing it. Steve

[8man]

Good looking truck!

[Tempest67]

Outstanding, looks great

[Jason 56]

Originally Posted by 57FleetsideC4

How much help did you have on the glass?? I am not looking forward to installing the glass and my front has the stainless trim. I am afraid of breaking the windshield installing it. Steve

Just one other person slapping on it as I was working the inside over the lip. Once started all the way around I pulled it the rest of the way with the rope. At that point you’ll have about 90% of the seal in place. From there is where your hands get sore. Just keep pushing and slapping until it’s in place. I had to use a large 90 degree pick to pull the bottom side over the lip. Here’s a great video from brothers truck. It’s how I figured out how to do it. I’m still pushing on it every time I walk by it. It’s slowly settling in place.

https://youtu.be/HMsdfQ2BDus?feature=shared

[57FleetsideC4]

Originally Posted by Jason 56

Just one other person slapping on it as I was working the inside over the lip. Once started all the way around I pulled it the rest of the way with the rope. At that point you’ll have about 90% of the seal in place. From there is where your hands get sore. Just keep pushing and slapping until it’s in place. I had to use a large 90 degree pick to pull the bottom side over the lip. Here’s a great video from brothers truck. It’s how I figured out how to do it. I’m still pushing on it every time I walk by it. It’s slowly settling in place.

https://youtu.be/HMsdfQ2BDus?feature=shared

Thank You. I am going to start with the back window first (less chance of breaking) then go after the front and will watch the video. Steve

[Rickysnickers]

Top notch!!

[oldman3]

nice job...Jim

[Jason 56]

Originally Posted by Tempest67

Outstanding, looks great

Originally Posted by Rickysnickers

Top notch!!

Originally Posted by oldman3

nice job...Jim

Thanks guys! It’s really starting to look like a truck with the glass in it.

[dsraven]

remember that the windshield doesn't come too far inside the rubber so it actually kinda sits against a ledge. otherwise the windshield would be pushed into the cab, worse case scenario. the rubber is kinda smaller than the glass if you think about it that way.

[6DoF]

i actually did the front first and had less issues than the back. that lock-strip thing makes it a good bit crazier