Do you need '64-'66 Chevy Truck Parts? - Page 18 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*LILRED66* · 12-27-2008, 12:25 AM

Quote:

Originally Posted by truckjunky

I just found one completely refurbished for $450.00 .... Does that sound like a good price? I also found one with some miles on it for $350.00??

I am not sure what a completely refurbished tranny goes for in CA, but that would be a good price here in Kansas City. Either one sounds pretty good to me, but without seeing them and having the details of what "refurbished" is, I can't really tell you for sure. If you can get the refurbished one for $450.00 with some sort of guarantee or warranty, I would go that route, but thas is if I were in your shoes.

Good luck and let me know what you decide to do. Happy Holidays.

*LILRED66* · 12-27-2008, 12:27 AM

Quote:

Originally Posted by northern 85

Tony have you come across a tach dash for a 64 yet?

I haven't seen one in a while. I have a few, but they are nestled in my trucks. Sorry I haven't seen any, but I will keep an eye out, because I see them from time to time in my travels.

Happy Holidays.

quickchevy · 12-27-2008, 03:18 AM

It has a v8 350.I need both.

*LILRED66* · 12-27-2008, 12:25 PM

Quote:

Originally Posted by quickchevy

It has a v8 350.I need both.

quickchevy:

Good morning and thanks for the clarification. I have both. How about $40.00, packaged and shipped, via UPS, Ground?

Please let me know if I can help you with these items or other 4-5-6 Chevy truck parts in the future.

quickchevy · 12-27-2008, 12:34 PM

Sounds good.Is the v6 and v8 different.Not sure what motor came with it.Has v8 now.Like i said.Thanks

*LILRED66* · 12-27-2008, 01:03 PM

Quote:

Originally Posted by quickchevy

Sounds good.Is the v6 and v8 different.Not sure what motor came with it.Has v8 now.Like i said.Thanks

The V6 was only available in the GMC trucks, not the Chevy trucks. The inline six and V8 throttle linkage is different, but the accelerator pedal is the same for the six and V8's.

I accept PayPay at:

dynamiccontracting@sbcglobal.net

or cashiers check/money order at the address in my signature.

Thanks for your business and let me know your intentions and I will proceed accordingly.

Happy Holidays.

TheDark1 · 12-29-2008, 12:43 AM

Do you have a rust free /dent free fleetside tailgate? PM me please with info. Thanks, jw

quickchevy · 12-29-2008, 04:24 PM

Oh meant to ask.Have you or anybody else you know converted the rod throttle linkage to a new pedal cable etc setup.

*LILRED66* · 01-04-2009, 11:42 AM

Here are photos of a set of four factory painted dog dish hub caps for a C10, as well as a set of four factory chrome dog dish hub caps for a C10. If you have any interest, please let me know.

rwc_27 · 01-04-2009, 02:08 PM

I am looking for fleetside bedsides for my '65 chevy. Do you have anything that would work?

SCOTI · 01-04-2009, 02:19 PM

PM sent on chrome caps......

ob1monkey · 01-05-2009, 11:07 PM

looking for fleet side wheel tubs?

jgh64pkup · 01-05-2009, 11:39 PM

do you have a short-fleetside bed

*LILRED66* · 01-06-2009, 01:51 AM

Quote:

Originally Posted by rwc_27

I am looking for fleetside bedsides for my '65 chevy. Do you have anything that would work?

Thanks for the inquiry. The only bed I currently have, that is not spoken for is a '63 lwb fleet. I can disassemble the bed sides, if that is all you need. Let me know your thoughts and I will reply accordingly.

*LILRED66* · 01-06-2009, 01:53 AM

Quote:

Originally Posted by SCOTI

PM sent on chrome caps......

Scot:

I got your PM. Thanks for your interest in the chrome dog dish hub caps and fleetside rock guards. I will ship these items, via UPS, Ground upon receipt of payment. Thanks for your business.

*LILRED66* · 01-06-2009, 01:55 AM

Quote:

Originally Posted by ob1monkey

looking for fleet side wheel tubs?

ob1monkey:

Thanks for your interest in my 4-5-6 Chevy truck parts. I am fresh-out of good, used fleetside wheel tubs. I have a few pairs that need some work on the mounting lips, but nothing that is plug-n-play. Sorry I couldn't help you with this item, but please keep me in mind of other 4-5-6 Chevy truck parts in the future.

*LILRED66* · 01-06-2009, 01:57 AM

Quote:

Originally Posted by jgh64pkup

do you have a short-fleetside bed

jgh64pkup:

Thanks for your interest in my 4-5-6 Chevy truck parts. The only good, used swb fleetside bed I currently have is spoken for. I have another one, but it has a few bullet holes in the bed sides, so it is not worth messing with.

Sorry I couldn't help you with this item, but please keep me in mind for other 4-5-6 Chevy truck parts in the future.

*LILRED66* · 01-06-2009, 01:59 AM

Quote:

Originally Posted by quickchevy

Oh meant to ask.Have you or anybody else you know converted the rod throttle linkage to a new pedal cable etc setup.

quickchevy:

Thanks for the inquiry. I haven't done this conversion, but you might try posting in the Engine & Driveline forum or in the 60-66 Chevy truck forum for more input.

Sorry I couldn't help you with your question, but please keep me in mind for other 4-5-6 Chevy truck parts in the future.

PS-I can't remember if I replied, via PM, to your request for a V8 throttle linkage and accelerator assembly...do you still need these items?

jason65 · 01-08-2009, 02:12 PM

Hey Tony. Do you have the horn pieces that make contact between the horn button and the t/s asym? I have the white plastic piece that sticks threw the steering wheel, but something is missing between that and the button.

jgh64pkup · 01-10-2009, 12:42 AM

what about the hinge assembly for the glove box i also need the latch and all the hardware

jason65 · 01-10-2009, 11:44 PM

Quote:

Originally Posted by jason65

Hey Tony. Do you have the horn pieces that make contact between the horn button and the t/s asym? I have the white plastic piece that sticks threw the steering wheel, but something is missing between that and the button.

I got it.

spoon · 01-11-2009, 12:32 AM

What's crackin' fellas! I'm looking for a '60-'66 SWB Fleetside bed, complete. I'm on the California coast. If you have any leads, please let me know! Thanks!

-Justin

joe231 · 01-11-2009, 11:15 PM

Tony, do you have a good foam bottom for a stock bench?

*LILRED66* · 01-16-2009, 10:22 AM

Quote:

Originally Posted by jgh64pkup

what about the hinge assembly for the glove box i also need the latch and all the hardware

I have a complete set, including the glove box door hinge, glove box button and the mounting screws. How about $20.00, including packaging & shipping?

Please let me know if I can help you with these items or other 4-5-6 Chevy truck parts in the future.

*LILRED66* · 01-16-2009, 10:27 AM

Quote:

Originally Posted by joe231

Tony, do you have a good foam bottom for a stock bench?

Thanks for the inquiry. I have a few good, used factory bench bottom foam inserts. They are $60.00, plus $32.00, packaging & shipping.

Please let me know if I can help you with this item or other 4-5-6 Chevy truck parts in the future.

12-27-2008, 03:18 AM	#428
quickchevy Registered User Join Date: Apr 2008 Location: Augusta,Ga Posts: 119	Re: Do you need '64-'66 Chevy Truck Parts? It has a v8 350.I need both.

12-27-2008, 12:34 PM	#430
quickchevy Registered User Join Date: Apr 2008 Location: Augusta,Ga Posts: 119	Re: Do you need '64-'66 Chevy Truck Parts? Sounds good.Is the v6 and v8 different.Not sure what motor came with it.Has v8 now.Like i said.Thanks

12-29-2008, 12:43 AM	#432
TheDark1 Intentionally Left Blank Join Date: Dec 2008 Location: Broussard, LA Posts: 355	Re: Do you need '64-'66 Chevy Truck Parts? Do you have a rust free /dent free fleetside tailgate? PM me please with info. Thanks, jw

12-29-2008, 04:24 PM	#433
quickchevy Registered User Join Date: Apr 2008 Location: Augusta,Ga Posts: 119	Re: Do you need '64-'66 Chevy Truck Parts? Oh meant to ask.Have you or anybody else you know converted the rod throttle linkage to a new pedal cable etc setup.

01-04-2009, 11:42 AM	#434
LILRED66 Account Suspended Join Date: May 2005 Location: Kansas City, KS Posts: 3,906	Re: Do you need '64-'66 Chevy Truck Parts? Here are photos of a set of four factory painted dog dish hub caps for a C10, as well as a set of four factory chrome dog dish hub caps for a C10. If you have any interest, please let me know. Attached Images

01-04-2009, 02:08 PM	#435
rwc_27 Registered User Join Date: Jan 2009 Location: Hays, Ks Posts: 1	Re: Do you need '64-'66 Chevy Truck Parts? I am looking for fleetside bedsides for my '65 chevy. Do you have anything that would work?

01-04-2009, 02:19 PM	#436
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,064	Re: Do you need '64-'66 Chevy Truck Parts? PM sent on chrome caps...... __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

01-05-2009, 11:07 PM	#437
ob1monkey Registered User Join Date: Dec 2008 Location: sanford,fl Posts: 185	Re: Do you need '64-'66 Chevy Truck Parts? looking for fleet side wheel tubs?

01-05-2009, 11:39 PM	#438
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: Do you need '64-'66 Chevy Truck Parts? do you have a short-fleetside bed __________________ Gage 1967 C10 Shortbed Stepside

01-08-2009, 02:12 PM	#444
jason65 Registerd User Join Date: Sep 2008 Location: Oklahoma Posts: 2,118	Re: Do you need '64-'66 Chevy Truck Parts? Hey Tony. Do you have the horn pieces that make contact between the horn button and the t/s asym? I have the white plastic piece that sticks threw the steering wheel, but something is missing between that and the button.

01-10-2009, 12:42 AM	#445
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: Do you need '64-'66 Chevy Truck Parts? what about the hinge assembly for the glove box i also need the latch and all the hardware __________________ Gage 1967 C10 Shortbed Stepside

01-11-2009, 12:32 AM	#447
spoon Registered Penetrator Join Date: Feb 2008 Location: Salinas, CA Posts: 153	Re: Do you need '64-'66 Chevy Truck Parts? What's crackin' fellas! I'm looking for a '60-'66 SWB Fleetside bed, complete. I'm on the California coast. If you have any leads, please let me know! Thanks! -Justin __________________ "Some people wear Superman pajamas. Superman wears Chuck Norris pajamas." "Chuck Norris is the only person on the planet that can kick you in the back of the face." "Chuck Norris doesn't 'tea-bag'... he 'potato-sacks.'"

01-11-2009, 11:15 PM	#448
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: Do you need '64-'66 Chevy Truck Parts? Tony, do you have a good foam bottom for a stock bench? __________________ *CHEVY ONLY*



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.