The Project Havoc.... - Page 18 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

nuke1 · 01-23-2010, 11:57 PM

A few more. 15.5 inches width now! can you say 335/40/18

*highperf4x4* · 01-24-2010, 12:48 AM

Quote:

Originally Posted by nuke1

A few more. 15.5 inches width now! can you say 335/40/18

I could but it would just make me jealous.

69GMCor70Chevy · 01-25-2010, 03:43 PM

Nuke, as another SK Gov't employee I can tell you that you can't beat it!!

My cousin's husband Rob is an appraiser in Regina for SGI.

nuke1 · 01-25-2010, 10:28 PM

Quote:

Originally Posted by 69GMCor70Chevy

Nuke, as another SK Gov't employee I can tell you that you can't beat it!!

My cousin's husband Rob is an appraiser in Regina for SGI.

Thank you! where do you work?

69GMCor70Chevy · 02-01-2010, 05:14 PM

Quote:

Originally Posted by nuke1

Thank you! where do you work?

Missed that one.....I work for the Ministry of Environment.

nuke1 · 02-07-2010, 04:49 PM

I guess i promised a pic of that cheap paint job of mine, i never did do it, but i did do a small test panel of it, found it out in the shop this morning, so here you go. Home brewed rustoleum Patina'd paint.

mcbassin · 02-07-2010, 04:57 PM

so you going for the "shop truck" look? That will be cool!

chevy88 · 02-07-2010, 05:29 PM

When do you plan on painting it?

squareshane33 · 02-07-2010, 06:39 PM

Just read almost all of the post! Wow! Good luck with the new career and the rest of the build. Can't wait to see more.

nuke1 · 02-07-2010, 07:00 PM

Quote:

Originally Posted by mcbassin

so you going for the "shop truck" look? That will be cool!

I still want this one to be painted, just do not know when it will happen.

Quote:

Originally Posted by chevy88

When do you plan on painting it?

I hope next winter, but knowing me, in another ten years

Quote:

Originally Posted by squareshane33

Just read almost all of the post! Wow! Good luck with the new career and the rest of the build. Can't wait to see more.

Thanks alot.

BTW I MISS MY TRUCK, I WANT SUMMER BACK SO I CAN DRIVE IT.

noonzor · 02-07-2010, 08:25 PM

dont we all miss summer...... at least us snow'd in sure do!

watahyahknow · 02-08-2010, 02:39 PM

seen them use the patina look on the west coast customs series a while back when they made the rad rod for there clothing brand (think it was called wrench not sure ) they used a verry thin rattle can type layer in between like first coat blackish grey/ charcoal second coat light grey thirth coat colour it made the wear through pop a little more might even use a brown under that as a first coat and only sand slightly throught he charcoal to give a slightly rusty impression

*87 chevy silverado* · 02-25-2010, 11:36 PM

nice projects

sourkraut · 02-25-2010, 11:48 PM

nuke did you have this blasted or did you clean it the hard way? you might have mentioned but did not notice if you did.

nuke1 · 02-26-2010, 12:04 AM

Quote:

Originally Posted by sourkraut

nuke did you have this blasted or did you clean it the hard way? you might have mentioned but did not notice if you did.

Ummm, which one? the camaro or the truck, I blasted the truck frame and sanded the camaro on here.

nuke1 · 02-26-2010, 12:11 AM

Well since there was a reply on here, I gotta show something, my truck in the snow, how sad. I pulled out the distributor, for something else and got myself a complete MSD ignition, pro billet distributor, 6AL, wires, and coil, gonna be nice. Also, when I was up in edmonton visiting Cory, we decided to build something for my truck.......

A SHEETMETAL RAMJET FUEL INJECTED INTAKE!!!!!!!!!!

We are gonna start on the fab soon, will be done for next teardown, sequential fuel injection, 8 injectors, 8 nitrous injectors, megasquirt controller, LS6 throttle body, heavily massaged, tone ring on my camshaft gear.....

It will be great.

nuke1 · 02-26-2010, 12:17 AM

Thanks!!!!!!!!

Quote:

Originally Posted by 87 chevy silverado

nice projects

*highperf4x4* · 02-26-2010, 12:24 AM

That my friend sounds like alot of Havoc!

sourkraut · 02-26-2010, 10:35 AM

sorry nuke, i thought i was on the clone thread and was asking about the camaro. your new set up sounds sweet! will you fab the plenum out of aluminum?

nuke1 · 02-26-2010, 01:46 PM

Quote:

Originally Posted by highperf4x4

That my friend sounds like alot of Havoc!

Your telling me, everytime Cory gets an idea in his head, we run with it, besides I am up for anything.

Quote:

Originally Posted by sourkraut

sorry nuke, i thought i was on the clone thread and was asking about the camaro. your new set up sounds sweet! will you fab the plenum out of aluminum?

The Camaro was initially sandblasted, but in the end I sasnded the entire car down. You can not leave it blasted and prime it, the paint will sink back horrible in sheen....... And yes the new plenum will be made of Aluminum, gotta get the pieces cnc'd and then start fabbing, but I needto get a few peices first.

sourkraut · 02-26-2010, 02:32 PM

That is really a neat project with the new fuel system, I am excited to see it come together. The reason I had asked about the blasting is I am still undecided whether to take my cab out to the blaster or just sand it and then blast the tight spots with my 50 lb tird blaster!

*highperf4x4* · 02-27-2010, 12:00 AM

Quote:

Originally Posted by sourkraut

with my 50 lb tird blaster!

Can I borrow that. I'd like to do some helpful things for my neighbors.

I'm just sayin.....................

sourkraut · 02-27-2010, 12:32 AM

anytime but no guarentees come with it!

*highperf4x4* · 02-27-2010, 12:45 AM

well now you got me nervous ...........

sourkraut · 02-27-2010, 12:48 AM

and for good reasons!

01-23-2010, 11:57 PM	#426
nuke1 Registered User Join Date: Jun 2007 Location: Saskatoon, Saskatchewan,: Posts: 2,901	Re: The Project Havoc.... A few more. 15.5 inches width now! can you say 335/40/18 Attached Images __________________ James 1968 GMC "HAVOC" 1986 GMC "Frank" J.J.R.H. Design & Consulting My 68`Rebuild "HAVOC": http://67-72chevytrucks.com/vboard/s...d.php?t=316300 A 58' chev build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=311238 1969 Camaro Pro Touring http://67-72chevytrucks.com/vboard/s...61#post3513361 Swiss Cheese: http://67-72chevytrucks.com/vboard/s...d.php?t=384390 Adjustable Trailing Arm How-To: http://67-72chevytrucks.com/vboard/s...d.php?t=321100 1968 Ford Farm Truck: http://67-72chevytrucks.com/vboard/s...=1#post6555587

01-25-2010, 03:43 PM	#428
69GMCor70Chevy Registered User Join Date: Jul 2007 Location: Greenwater Lake, SK Posts: 175	Re: The Project Havoc.... Nuke, as another SK Gov't employee I can tell you that you can't beat it!! My cousin's husband Rob is an appraiser in Regina for SGI. __________________ 68 Camaro - 327 Original Red on Red Car 69 GMC LWB - Built 350 a Blast To Drive 69 GMC LWB - "Green Machine" One Family Truck 70 Mercury Marauder - Future Project

02-07-2010, 04:49 PM	#431
nuke1 Registered User Join Date: Jun 2007 Location: Saskatoon, Saskatchewan,: Posts: 2,901	Re: The Project Havoc.... I guess i promised a pic of that cheap paint job of mine, i never did do it, but i did do a small test panel of it, found it out in the shop this morning, so here you go. Home brewed rustoleum Patina'd paint. Attached Images __________________ James 1968 GMC "HAVOC" 1986 GMC "Frank" J.J.R.H. Design & Consulting My 68`Rebuild "HAVOC": http://67-72chevytrucks.com/vboard/s...d.php?t=316300 A 58' chev build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=311238 1969 Camaro Pro Touring http://67-72chevytrucks.com/vboard/s...61#post3513361 Swiss Cheese: http://67-72chevytrucks.com/vboard/s...d.php?t=384390 Adjustable Trailing Arm How-To: http://67-72chevytrucks.com/vboard/s...d.php?t=321100 1968 Ford Farm Truck: http://67-72chevytrucks.com/vboard/s...=1#post6555587

02-07-2010, 04:57 PM	#432
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: The Project Havoc.... so you going for the "shop truck" look? That will be cool! __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

02-07-2010, 05:29 PM	#433
chevy88 Registered User Join Date: May 2007 Location: Southern, Saskatchewan Posts: 640	Re: The Project Havoc.... When do you plan on painting it? __________________ Kerry My build thread. http://67-72chevytrucks.com/vboard/s....php?p=3657823 1971 Chev SWB with 68 nose, 6.2 diesel th350, and 3.73 rear gears 1988 Chev Extendacab 2010 Honda VT1300CS Sabre 2005 Buick Rendezvous wife's ride

02-07-2010, 06:39 PM	#434
squareshane33 Registered User Join Date: Oct 2009 Location: Tulsa, OK Posts: 30	Re: The Project Havoc.... Just read almost all of the post! Wow! Good luck with the new career and the rest of the build. Can't wait to see more. __________________ *SquareShane33* 1987 SWB (Future Project) 1958 BBW Short Bed Fleetside 1978 SWB (RIP) Last edited by squareshane33; 02-07-2010 at 06:40 PM. Reason: sentence structure

02-07-2010, 08:25 PM	#436
noonzor Registered User Join Date: Aug 2009 Location: Edmonton, Alberta Posts: 818	Re: The Project Havoc.... dont we all miss summer...... at least us snow'd in sure do! __________________ 69 c10 Shortbox Build http://67-72chevytrucks.com/vboard/s...d.php?t=360622

02-08-2010, 02:39 PM	#437
watahyahknow Registered User Join Date: Jul 2006 Location: the netherlands europe Posts: 4,335	Re: The Project Havoc.... seen them use the patina look on the west coast customs series a while back when they made the rad rod for there clothing brand (think it was called wrench not sure ) they used a verry thin rattle can type layer in between like first coat blackish grey/ charcoal second coat light grey thirth coat colour it made the wear through pop a little more might even use a brown under that as a first coat and only sand slightly throught he charcoal to give a slightly rusty impression __________________ i got a job again and having fun at it too idea's for the trucks and the order of things to do are taking shape and get closer to being realized , a few more months and i be able to start building for real i complete 2 of the trucks intoo running fashion one custom and one basicly stock the thirth will be sacrificed for parts Last edited by watahyahknow; 02-08-2010 at 02:41 PM.

02-25-2010, 11:36 PM	#438
87 chevy silverado Account Suspended Join Date: Apr 2009 Location: lexington South Carolina Posts: 2,124	Re: The Project Havoc.... nice projects

02-25-2010, 11:48 PM	#439
sourkraut Registered User Join Date: Sep 2008 Location: WI Posts: 1,243	Re: The Project Havoc.... nuke did you have this blasted or did you clean it the hard way? you might have mentioned but did not notice if you did. __________________ "The way it is" truck build http://67-72chevytrucks.com/vboard/s...d.php?t=359200

02-26-2010, 12:11 AM	#441
nuke1 Registered User Join Date: Jun 2007 Location: Saskatoon, Saskatchewan,: Posts: 2,901	Re: The Project Havoc.... Well since there was a reply on here, I gotta show something, my truck in the snow, how sad. I pulled out the distributor, for something else and got myself a complete MSD ignition, pro billet distributor, 6AL, wires, and coil, gonna be nice. Also, when I was up in edmonton visiting Cory, we decided to build something for my truck....... A SHEETMETAL RAMJET FUEL INJECTED INTAKE!!!!!!!!!! We are gonna start on the fab soon, will be done for next teardown, sequential fuel injection, 8 injectors, 8 nitrous injectors, megasquirt controller, LS6 throttle body, heavily massaged, tone ring on my camshaft gear..... It will be great. Attached Images __________________ James 1968 GMC "HAVOC" 1986 GMC "Frank" J.J.R.H. Design & Consulting My 68`Rebuild "HAVOC": http://67-72chevytrucks.com/vboard/s...d.php?t=316300 A 58' chev build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=311238 1969 Camaro Pro Touring http://67-72chevytrucks.com/vboard/s...61#post3513361 Swiss Cheese: http://67-72chevytrucks.com/vboard/s...d.php?t=384390 Adjustable Trailing Arm How-To: http://67-72chevytrucks.com/vboard/s...d.php?t=321100 1968 Ford Farm Truck: http://67-72chevytrucks.com/vboard/s...=1#post6555587 Last edited by nuke1; 02-26-2010 at 12:12 AM.

02-26-2010, 12:24 AM	#443
highperf4x4 Account Suspended Join Date: Apr 2009 Location: Oklahoma City Posts: 4,709	Re: The Project Havoc.... That my friend sounds like alot of Havoc!

02-26-2010, 10:35 AM	#444
sourkraut Registered User Join Date: Sep 2008 Location: WI Posts: 1,243	Re: The Project Havoc.... sorry nuke, i thought i was on the clone thread and was asking about the camaro. your new set up sounds sweet! will you fab the plenum out of aluminum? __________________ "The way it is" truck build http://67-72chevytrucks.com/vboard/s...d.php?t=359200

02-26-2010, 02:32 PM	#446
sourkraut Registered User Join Date: Sep 2008 Location: WI Posts: 1,243	Re: The Project Havoc.... That is really a neat project with the new fuel system, I am excited to see it come together. The reason I had asked about the blasting is I am still undecided whether to take my cab out to the blaster or just sand it and then blast the tight spots with my 50 lb tird blaster! __________________ "The way it is" truck build http://67-72chevytrucks.com/vboard/s...d.php?t=359200

02-27-2010, 12:32 AM	#448
sourkraut Registered User Join Date: Sep 2008 Location: WI Posts: 1,243	Re: The Project Havoc.... anytime but no guarentees come with it! __________________ "The way it is" truck build http://67-72chevytrucks.com/vboard/s...d.php?t=359200



Register or Log In To remove these advertisements.

02-27-2010, 12:45 AM	#449
highperf4x4 Account Suspended Join Date: Apr 2009 Location: Oklahoma City Posts: 4,709	Re: The Project Havoc.... well now you got me nervous ...........

02-27-2010, 12:48 AM	#450
sourkraut Registered User Join Date: Sep 2008 Location: WI Posts: 1,243	Re: The Project Havoc.... and for good reasons! __________________ "The way it is" truck build http://67-72chevytrucks.com/vboard/s...d.php?t=359200

Register or Log In To remove these advertisements.