KS Pre Valentines 2014 67-72 trucks parts SPECIAL - Page 18 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Dave** · 03-29-2014, 12:12 AM

Randy, can I get just the air cleaner lid from the picture on the first page. Since the assembly has holes in it. Lmk, thx.
Dave.

shortbed70 · 03-29-2014, 12:23 AM

Randy do you have any 3.73-4.10 5 lug rear and front disc from 72 you want rid of? Pm me...

BKSS67 · 03-29-2014, 12:30 AM

Hi Randy

I sent you a PM as well, I'll take the parchment visor clips.

Thanks
Brian

teeitup · 03-29-2014, 09:12 AM

Dave, I will today

Troy, I have a 72 1/2 truck I just hauled in last week, unsure ratio but will try to pull cover today. I get $200 for the pair

Brian, I'll pm you in a bit

Thanks Randy

hanly2 · 03-29-2014, 06:08 PM

I think they would work, but I can do $17 for them I will have to pass. sorry.

teeitup · 03-30-2014, 10:33 AM

Dave, pics today for sure

Troy, I pulled cover can't get the rearend to turn, I took off all brakes on drivers side and still doesn't turn, not sure whats going on with it. Gears all look good on inside

Brian, I will get them mailed out, Thanks

hanly2, no problem, good luck in your search

Thanks Randy

shortbed70 · 03-30-2014, 11:27 AM

Thx randy I'm going to do more tuning on my combo. If it doesn't start cooperating I'll b looking u up. Might just swap in a highway gear and th 350 trans.

teeitup · 03-30-2014, 07:46 PM

No problem Troy

Dave, I have 2

**Dave** · 04-02-2014, 11:49 PM

Randy,
I'll take the lid in the first pic, pending price shipped. Lmk, thx Dave.

teeitup · 04-03-2014, 08:05 AM

Dave. $12 plus shipping, Thanks Randy

**Dave** · 04-03-2014, 10:07 AM

Randy,
I'll take it. How do you want paid? Pm details thx Dave.

teeitup · 04-03-2014, 12:41 PM

Dave, I'll try to get you a quote tonight if time, Thanks Randy

**Dave** · 04-03-2014, 01:38 PM

Ok, thx dave.

mikeb81 · 04-03-2014, 03:25 PM

How much for a steering column and the heater control?

teeitup · 04-03-2014, 09:38 PM

Mike, I don't have any good one right now but I may have 2 71's bought if so I will be parting them out. Thanks Randy

Undone · 04-06-2014, 07:34 PM

I need a windshield trim center joining clip. Any by chance.

heavymech · 04-09-2014, 10:24 PM

Do you have two decent 67 wiper knobs?

teeitup · 04-09-2014, 10:26 PM

Sorry none right now, Thanks

bobshotrodblazer · 06-26-2014, 10:47 AM

Hi
would you have a passenger sash channel? ..$?

teeitup · 06-26-2014, 12:12 PM

Bob sorry none right now thanks Randy

burb71 · 07-01-2014, 05:42 PM

Randy I have short list of smalls needed for my restoration.
On metal parts as rust free as possible.

Upper hood latch striker.

Dash A/C ball housing set with screws.

Original nut an bolt set for front & rear bumper brackets, my originals had TR on the head

Original Tower style Hose Clamps, very much need em for upper n lower radiator, but assortment of other sizes also.

Delco Headlight switch.

Also please tell price and a little about the set of Original Delco spiral shocks you have in pics?
What year truck did they come from, front or rear, 2 or 4 wheel drive?

teeitup · 07-02-2014, 10:20 PM

Steve, I have the hood striker, I'll have the AC vents in a truck I'm getting in. None of the bolts for bumpers. I'll have to look on tower clamps and headlight switch. Sorry sold the original shocks already

Thanks Randy

burb71 · 07-02-2014, 10:28 PM

Quote:

Originally Posted by teeitup

Steve, I have the hood striker, I'll have the AC vents in a truck I'm getting in. None of the bolts for bumpers. I'll have to look on tower clamps and headlight switch. Sorry sold the original shocks already

Thanks Randy

Ok Randy let me know price on all that you have after you can check

teeitup · 07-06-2014, 10:51 PM

Steve, here is all I have. one of the ac vents has a little scratch and one tab is cracked, most have cracked tabs it seems when I remove them, it will still mount with no problem

burb71 · 07-07-2014, 05:04 PM

Ill take all thats in pic, thanks Randy

PM me, Steve

03-29-2014, 12:12 AM	#426
Dave DND Trucks Join Date: Dec 1999 Location: NW Indiana Posts: 2,397	Re: Pre Valentines 2014 67-72 trucks parts SPECIAL Randy, can I get just the air cleaner lid from the picture on the first page. Since the assembly has holes in it. Lmk, thx. Dave.

03-29-2014, 12:23 AM	#427
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: Pre Valentines 2014 67-72 trucks parts SPECIAL Randy do you have any 3.73-4.10 5 lug rear and front disc from 72 you want rid of? Pm me... __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

03-29-2014, 12:30 AM	#428
BKSS67 Registered User Join Date: Feb 2009 Location: Norcal, CA Posts: 169	Re: Pre Valentines 2014 67-72 trucks parts SPECIAL Hi Randy I sent you a PM as well, I'll take the parchment visor clips. Thanks Brian

03-29-2014, 09:12 AM	#429
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Pre Valentines 2014 67-72 trucks parts SPECIAL Dave, I will today Troy, I have a 72 1/2 truck I just hauled in last week, unsure ratio but will try to pull cover today. I get $200 for the pair Brian, I'll pm you in a bit Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-29-2014, 06:08 PM	#430
hanly2 Registered User Join Date: Mar 2014 Location: Gibbstown, NJ Posts: 176	Re: Pre Valentines 2014 67-72 trucks parts SPECIAL I think they would work, but I can do $17 for them I will have to pass. sorry.

03-30-2014, 10:33 AM	#431
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Pre Valentines 2014 67-72 trucks parts SPECIAL Dave, pics today for sure Troy, I pulled cover can't get the rearend to turn, I took off all brakes on drivers side and still doesn't turn, not sure whats going on with it. Gears all look good on inside Brian, I will get them mailed out, Thanks hanly2, no problem, good luck in your search Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

03-30-2014, 11:27 AM	#432
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: Pre Valentines 2014 67-72 trucks parts SPECIAL Thx randy I'm going to do more tuning on my combo. If it doesn't start cooperating I'll b looking u up. Might just swap in a highway gear and th 350 trans. __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

03-30-2014, 07:46 PM	#433
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Pre Valentines 2014 67-72 trucks parts SPECIAL No problem Troy Dave, I have 2 Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-02-2014, 11:49 PM	#434
Dave DND Trucks Join Date: Dec 1999 Location: NW Indiana Posts: 2,397	Re: Pre Valentines 2014 67-72 trucks parts SPECIAL Randy, I'll take the lid in the first pic, pending price shipped. Lmk, thx Dave.

04-03-2014, 08:05 AM	#435
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Pre Valentines 2014 67-72 trucks parts SPECIAL Dave. $12 plus shipping, Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-03-2014, 10:07 AM	#436
Dave DND Trucks Join Date: Dec 1999 Location: NW Indiana Posts: 2,397	Re: Pre Valentines 2014 67-72 trucks parts SPECIAL Randy, I'll take it. How do you want paid? Pm details thx Dave.

04-03-2014, 12:41 PM	#437
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Pre Valentines 2014 67-72 trucks parts SPECIAL Dave, I'll try to get you a quote tonight if time, Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-03-2014, 01:38 PM	#438
Dave DND Trucks Join Date: Dec 1999 Location: NW Indiana Posts: 2,397	Re: Pre Valentines 2014 67-72 trucks parts SPECIAL Ok, thx dave.

04-03-2014, 03:25 PM	#439
mikeb81 Registered User Join Date: Mar 2014 Location: Ocean Springs, Ms Posts: 18	Re: Pre Valentines 2014 67-72 trucks parts SPECIAL How much for a steering column and the heater control?

04-03-2014, 09:38 PM	#440
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Pre Valentines 2014 67-72 trucks parts SPECIAL Mike, I don't have any good one right now but I may have 2 71's bought if so I will be parting them out. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"



Register or Log In To remove these advertisements.

04-06-2014, 07:34 PM	#441
Undone Registered User Join Date: Aug 2010 Location: commerce ga Posts: 896	Re: Pre Valentines 2014 67-72 trucks parts SPECIAL I need a windshield trim center joining clip. Any by chance.

04-09-2014, 10:24 PM	#442
heavymech Registered User Join Date: Nov 2013 Location: Burns Harbor, IN Posts: 46	Re: Pre Valentines 2014 67-72 trucks parts SPECIAL Do you have two decent 67 wiper knobs?

04-09-2014, 10:26 PM	#443
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Pre Valentines 2014 67-72 trucks parts SPECIAL Sorry none right now, Thanks __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

06-26-2014, 10:47 AM	#444
bobshotrodblazer BigBlockBobby Join Date: Mar 2004 Location: Lake Worth, Florida Posts: 740	Re: Pre Valentines 2014 67-72 trucks parts SPECIAL Hi would you have a passenger sash channel? ..$? __________________ Bob

06-26-2014, 12:12 PM	#445
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Pre Valentines 2014 67-72 trucks parts SPECIAL Bob sorry none right now thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

07-01-2014, 05:42 PM	#446
burb71 Active Member Join Date: Oct 2002 Location: Ft. Myers, Fl Posts: 1,716	Re: Pre Valentines 2014 67-72 trucks parts SPECIAL Randy I have short list of smalls needed for my restoration. On metal parts as rust free as possible. Upper hood latch striker. Dash A/C ball housing set with screws. Original nut an bolt set for front & rear bumper brackets, my originals had TR on the head Original Tower style Hose Clamps, very much need em for upper n lower radiator, but assortment of other sizes also. Delco Headlight switch. Also please tell price and a little about the set of Original Delco spiral shocks you have in pics? What year truck did they come from, front or rear, 2 or 4 wheel drive? Last edited by burb71; 07-02-2014 at 03:47 PM.

07-02-2014, 10:20 PM	#447
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Pre Valentines 2014 67-72 trucks parts SPECIAL Steve, I have the hood striker, I'll have the AC vents in a truck I'm getting in. None of the bolts for bumpers. I'll have to look on tower clamps and headlight switch. Sorry sold the original shocks already Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

07-06-2014, 10:51 PM	#449
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,395	Re: Pre Valentines 2014 67-72 trucks parts SPECIAL Steve, here is all I have. one of the ac vents has a little scratch and one tab is cracked, most have cracked tabs it seems when I remove them, it will still mount with no problem Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

07-07-2014, 05:04 PM	#450
burb71 Active Member Join Date: Oct 2002 Location: Ft. Myers, Fl Posts: 1,716	Re: Pre Valentines 2014 67-72 trucks parts SPECIAL Ill take all thats in pic, thanks Randy PM me, Steve

Register or Log In To remove these advertisements.