What did you do to your truck today? - Page 187 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

_1966ChevyPU · 04-29-2012, 01:36 AM

1&2) Pressure washed the frame
3&4) Painted inner fenders and grille support
5) Mocking the motor with the cab

_1966ChevyPU · 04-29-2012, 01:40 AM

1&2) Mocking up how similar size tire/wheel will look
3) Did some sanding (no after... WTF? LOL)
4&5) Frame all nice and shiny

robber grin · 04-29-2012, 09:45 PM

I pulled the front crossmember and torsion bars out of my 62 C10.

66-PMD-GMC · 04-29-2012, 11:15 PM

What did I do on my truck???
Actually for my truck was work... to make money... to feed the addiction.

mud.man.rj · 04-29-2012, 11:27 PM

I am hoping for not dead me on the sled, do have a speed need though, that is why I went back to trucks from Muscle cars, lots of big block fun with truck but less tickets and good all year round.

GMR-PERFORMANCE · 04-30-2012, 08:33 PM

Take a look into the champion aluminum rad. Vs the cost of a re core. I know that I was less money to buy new.

Rich 5150 69 · 04-30-2012, 09:09 PM

Quote:

Originally Posted by gmr-performance

take a look into the champion aluminum rad. Vs the cost of a re core. I know that i was less money to buy new.

x2

CRGRS 66 · 05-10-2012, 09:07 PM

Quote:

Originally Posted by GMR-PERFORMANCE

Take a look into the champion aluminum rad. Vs the cost of a re core. I know that I was less money to buy new.

Quote:

Originally Posted by Rich 5150 69

x2

Thanks for the advice GMR and Rich, new rad arrived today, headed out for an extra long weekend in the morning will get it in next week.

hopped up · 04-30-2012, 09:25 PM

Hey rich5150 where'd you get that fan shroud from? Looks new so it's notstock, I need one soon
Posted via Mobile Device

Rich 5150 69 · 05-01-2012, 12:42 AM

Quote:

Originally Posted by hopped up

Hey rich5150 where'd you get that fan shroud from? Looks new so it's notstock, I need one soon
Posted via Mobile Device

Its original to the truck, just gave it a light wet sanding with 600 grit and reshot with semi gloss.

CRGRS 66 · 05-01-2012, 12:17 PM

Thanks guys! Looking into a few different available "new" options.

Quote:

Originally Posted by Rich 5150 69

x2

Shroud looks good Rich, mine looked good too, but now that I have it off, I see that it has some damage which was repaired rather poorly. *Do you know if these original shrouds are made of fibreglass?

Quote:

Originally Posted by GMR-PERFORMANCE

Take a look into the champion aluminum rad. Vs the cost of a re core. I know that I was less money to buy new.

Quote:

Originally Posted by ABX131

I bought a new champion radiator off ebay for $200 with shipping for my son's 67 Pontiac Lemans...you can't beat the price for what you get and they look great....I do recommend spending the extra money for a 3 or 4 core model VS a 2 core.

CRGRS 66 · 05-01-2012, 01:15 PM

Just ordered an American Eagle Rad from Ledfoot (same as Champion), thanks for the heads up guys, it really pays to post sh&&t here!!!!!!. I have a couple weeks now to do some clean up before the rad shows up, that will make the next outing that much more enjoyable.

I have a new top rad hose, any suggestions for a new bottom hose?

Rich 5150 69 · 05-01-2012, 08:54 PM

Quote:

Originally Posted by CRGRS 66

Thanks guys! Looking into a few different available "new" options.

Shroud looks good Rich, mine looked good too, but now that I have it off, I see that it has some damage which was repaired rather poorly. *Do you know if these original shrouds are made of fibreglass?

Yes they are, but with age they get more brittle, treat them with respect...one word of caution to all of those that buy new radiators, if the vendor is suppling a rad cap with it watch the pressure as mine would not open up at 13 lbs, so it blew my heater core out and it was only three years old, could have been a cheap china core I guess, but who is to know anymore...

CRGRS 66 · 05-01-2012, 11:17 PM

Quote:

Originally Posted by Rich 5150 69

Yes they are, but with age they get more brittle, treat them with respect...one word of caution to all of those that buy new radiators, if the vendor is suppling a rad cap with it watch the pressure as mine would not open up at 13 lbs, so it blew my heater core out and it was only three years old, could have been a cheap china core I guess, but who is to know anymore...

Thanks for the heads up!
When I order goods form the USA, I need to get country of origin on everything for my customs broker in Buffalo (FYI, Champion/AE Rads are chinese). If you want to know, you can ask whoever you order goods from for the country of origin. Tell them the parts will be ending up in Canada, and you need the Info for NAFTA purposes. They MUST tell you this if you ask.

ABX131 · 04-30-2012, 09:27 PM

I bought a new champion radiator off ebay for $200 with shipping for my son's 67 Pontiac Lemans...you can't beat the price for what you get and they look great....I do recommend spending the extra money for a 3 or 4 core model VS a 2 core.

Narxoleptic Customs · 05-02-2012, 01:42 PM

Drilled the mount holes in the floor for the seat and seat belts. Headed to the parts store for shocks for the front...
Posted via Mobile Device

CRGRS 66 · 05-02-2012, 02:38 PM

Quote:

Originally Posted by Narxoleptic Customs

Drilled the mount holes in the floor for the seat and seat belts. Headed to the parts store for shocks for the front...
Posted via Mobile Device

Have a look at this thread for shocks, there is an attachment as well for selecting the right Monroe shock.
http://67-72chevytrucks.com/vboard/f...splay.php?f=25

CdM · 05-02-2012, 05:21 PM

day three of cleaning the front crossmember out sanding for paint today... finally.. probably removed 25 lbs of grease dirt combo. hard as a rock but thanks to denatured alcohol its broke up kinda easy

K5 Addiction · 05-02-2012, 07:25 PM

C Notched the rear & dropped another it more 3inches
Before & after. Wish I could say I did it. My far more talented friend did all of this.

Kerlijah · 05-03-2012, 02:11 AM

Quote:

Originally Posted by K5 Addiction

C Notched the rear & dropped another it more 3inches
Before & after. Wish I could say I did it. My far more talented friend did all of this.

That's some nice work! And a beautiful truck, congrats!

61_FL_Apache · 05-02-2012, 07:39 PM

Is that static or on bags?

K5 Addiction · 05-02-2012, 10:50 PM

Quote:

Originally Posted by 61_FL_Apache

Is that static or on bags?

It's Static.

shrunken66stroker · 05-02-2012, 09:56 PM

Cut the pinch welds off the bottom of the cab and when I hit the frame support with a hammer this came out. I thought I'd beat all the dirt out of it but I guess I was wrong.

coulter · 05-03-2012, 02:18 AM

Quote:

Originally Posted by shrunken66stroker

I thought I'd beat all the dirt out of it but I guess I was wrong.

lol ive thought the same thing several times on mine!!! lol

dantimdad · 05-02-2012, 10:04 PM

Got in 108 button head stainless bolts from allensfasterners. These will replace all the visible body bolts and engine accessory bolts.

I also finished stitch welding in half the panel to smoothe the cowl.

Steven

04-29-2012, 01:36 AM	#1
_1966ChevyPU Registered User Join Date: Feb 2012 Location: Chandler, AZ Posts: 97	Re: What did you do to your truck today? 1&2) Pressure washed the frame 3&4) Painted inner fenders and grille support 5) Mocking the motor with the cab Attached Images __________________ Bryan (Redneck) '66 Chevy Longbed Fleetside '12 Dodge Ram 3500 '08 BigDog Pitbull '11 Cargomate Trailer (Toy Hauler)

04-29-2012, 01:40 AM	#2
_1966ChevyPU Registered User Join Date: Feb 2012 Location: Chandler, AZ Posts: 97	Re: What did you do to your truck today? 1&2) Mocking up how similar size tire/wheel will look 3) Did some sanding (no after... WTF? LOL) 4&5) Frame all nice and shiny Attached Images __________________ Bryan (Redneck) '66 Chevy Longbed Fleetside '12 Dodge Ram 3500 '08 BigDog Pitbull '11 Cargomate Trailer (Toy Hauler)

04-29-2012, 09:45 PM	#3
robber grin Registered User Join Date: Apr 2012 Location: Sunny Youngwood PA Posts: 463	Re: What did you do to your truck today? I pulled the front crossmember and torsion bars out of my 62 C10.

04-29-2012, 11:15 PM	#4
66-PMD-GMC The 60-66 GMC/Pontiac guy.... Join Date: Oct 2010 Location: Apache Junction, Arizona Posts: 1,306	Re: What did you do to your truck today? What did I do on my truck??? Actually for my truck was work... to make money... to feed the addiction. __________________ Building Genuine Pontiac Firepowered cars and trucks for several decades. Why Pontiac?? That's just me daring to be different. Projects.. 63 C10 Short Wheel Base fleetside (The Pro-Street) currently under reconstruction. 440CID 2X4 Pontiac

04-29-2012, 11:27 PM	#5
mud.man.rj Registered User Join Date: Dec 2011 Location: Creighton Sask. Canada Posts: 4,121	Re: What did you do to your truck today? I am hoping for not dead me on the sled, do have a speed need though, that is why I went back to trucks from Muscle cars, lots of big block fun with truck but less tickets and good all year round.

04-30-2012, 08:33 PM	#6
GMR-PERFORMANCE Registered User Join Date: Aug 2010 Location: Keller TX Posts: 836	Re: What did you do to your truck today? Take a look into the champion aluminum rad. Vs the cost of a re core. I know that I was less money to buy new. __________________ 62 long box with a little SBC http://www.67-72chevytrucks.com/vboa...d.php?t=510631 http://good-times.webshots.com/album/561798652HdwqzG

04-30-2012, 09:25 PM	#9
hopped up Registered User Join Date: Jul 2010 Location: los angeles,ca Posts: 3,617	Re: What did you do to your truck today? Hey rich5150 where'd you get that fan shroud from? Looks new so it's notstock, I need one soon Posted via Mobile Device

05-01-2012, 01:15 PM	#12
CRGRS 66 Registered User Join Date: Apr 2012 Location: Cambridge, Ontario, Canada Posts: 1,771	Re: What did you do to your truck today? Just ordered an American Eagle Rad from Ledfoot (same as Champion), thanks for the heads up guys, it really pays to post sh&&t here!!!!!!. I have a couple weeks now to do some clean up before the rad shows up, that will make the next outing that much more enjoyable. I have a new top rad hose, any suggestions for a new bottom hose? __________________ Craigerrr My build thread, CRGRS 66 Winter Build: http://67-72chevytrucks.com/vboard/s...09#post5638709

04-30-2012, 09:27 PM	#15
ABX131 Registered User Join Date: Mar 2012 Location: Seattle,WA Posts: 317	Re: What did you do to your truck today? I bought a new champion radiator off ebay for $200 with shipping for my son's 67 Pontiac Lemans...you can't beat the price for what you get and they look great....I do recommend spending the extra money for a 3 or 4 core model VS a 2 core.

05-02-2012, 01:42 PM	#16
Narxoleptic Customs Registered User Join Date: Dec 2011 Location: Blytheville/Bentonville, AR Posts: 393	Re: What did you do to your truck today? Drilled the mount holes in the floor for the seat and seat belts. Headed to the parts store for shocks for the front... Posted via Mobile Device

05-02-2012, 05:21 PM	#18
CdM Registered User Join Date: May 2011 Location: Oceano,CA Posts: 157	Re: What did you do to your truck today? day three of cleaning the front crossmember out sanding for paint today... finally.. probably removed 25 lbs of grease dirt combo. hard as a rock but thanks to denatured alcohol its broke up kinda easy __________________ Build Thread 66 custom cab lwb http://67-72chevytrucks.com/vboard/s...d.php?t=465726 66 fleet lwb- In process 64 k10 10inch lift 38.5's- In process 92k1500 400hp on 38.5-parts truck now 8(

05-02-2012, 07:25 PM	#19
K5 Addiction Registered User Join Date: Jul 2011 Location: Tennessee Posts: 404	Re: What did you do to your truck today? C Notched the rear & dropped another it more 3inches Before & after. Wish I could say I did it. My far more talented friend did all of this. Attached Images

05-02-2012, 07:39 PM	#21
61_FL_Apache Who Me? Join Date: Sep 2010 Location: Royal Palm Beach, FL Posts: 4,067	Re: What did you do to your truck today? Is that static or on bags? __________________ Steve 1997 Tahoe LT 4D 2WD (DD) 2001 Blazer 4D 2WD 1961 Apache 10 (sold) 1965 C10 Stepper (sold)

05-02-2012, 09:56 PM	#23
shrunken66stroker Registered User Join Date: Jan 2008 Location: Las Vegas, Nv Posts: 954	Re: What did you do to your truck today? Cut the pinch welds off the bottom of the cab and when I hit the frame support with a hammer this came out. I thought I'd beat all the dirt out of it but I guess I was wrong. Attached Images __________________ http://67-72chevytrucks.com/vboard/s...54#post3194654

05-02-2012, 10:04 PM	#25
dantimdad Registered User Join Date: Feb 2010 Location: Hartselle, Al. Posts: 466	Re: What did you do to your truck today? Got in 108 button head stainless bolts from allensfasterners. These will replace all the visible body bolts and engine accessory bolts. I also finished stitch welding in half the panel to smoothe the cowl. Steven __________________ “Life is and will ever remain an equation incapable of solution, but it contains certain known factors.” - Nikola Tesla Matt. 6:27 "Who of you by worrying can add a single hour to his life?” http://www.67-72chevytrucks.com/vboa...=507266&page=2



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.