How about some pics of 73-91 crew cabs - Page 187 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

North60 · 12-31-2012, 03:47 PM

Quote:

Originally Posted by jlsanborn

All in good fun here! That sure is a sweet looking truck. What engine in there?

Posted via Mobile Device
Posted via Mobile Device

454 nat asp. Starts just like the tbi 87 I had. It seems to idle high, but I think the cold thermostat is the cause the temp gauge won't run past 1/4 notch. Heat in cab is good. The truck originally came from Nevada, had all the work done in California. m thinking the stat is a 165. I'll get it sorted out.
Posted via Mobile Device

jlsanborn · 12-31-2012, 04:30 PM

Q-jet I presume? With an electric choke I wouldn't think a low engine temp would keep it on fast idle. Do the secondaries open once its warm?
Posted via Mobile Device

North60 · 12-31-2012, 04:38 PM

Good question, I will check when I get a chance. It does kick down but not as much as I would expect.
Posted via Mobile Device

North60 · 12-31-2012, 04:40 PM

I assume qjet, buy all I have done is synthetic oil change and block heaters, I haven't even had the air cleaner off. It had been in the -35 c range for weeks. -1 today. Feels tropical.
Posted via Mobile Device

jlsanborn · 12-31-2012, 04:41 PM

If it is a q-jet and you're into tinkering with that, pm me an email address. I have a great tech paper that's worth the read!
Posted via Mobile Device

North60 · 12-31-2012, 04:52 PM

Quote:

Originally Posted by jlsanborn

If it is a q-jet and you're into tinkering with that, pm me an email address. I have a great tech paper that's worth the read!
Posted via Mobile Device

Check out this squarebody, I just took the pic. It's outside my office.
Posted via Mobile Device

North60 · 12-31-2012, 04:53 PM

It's used for pushing light aircraft around
Posted via Mobile Device

jlsanborn · 12-31-2012, 05:58 PM

That is pretty cool!

Big-Sexy907 · 01-01-2013, 07:17 AM

Jittery / Comegetsome, what are you guys using for wheels? Trucks look great btw!

jitteryguy · 01-01-2013, 08:05 AM

Quote:

Originally Posted by Big-Sexy907

Jittery / Comegetsome, what are you guys using for wheels? Trucks look great btw!

thank's, 22.5" Alcoa's mill'd down to 22".

comegetsome2003 · 01-01-2013, 08:55 AM

Yea im also running 22.5s milled down to 22s.....my front suspension is narrowed 1 inch and im running a SRW rear end to get them tucked under the fenders
Posted via Mobile Device

Big-Sexy907 · 01-01-2013, 08:58 AM

Quote:

Originally Posted by jitteryguy

thank's, 22.5" Alcoa's mill'd down to 22".

Are you running a standard rear wheel or is this like TW&T's Tow Nasty wheel?

Quote:

Originally Posted by comegetsome2003

Yea im also running 22.5s milled down to 22s.....my front suspension is narrowed 1 inch and im running a SRW rear end to get them tucked under the fenders
Posted via Mobile Device

Do you have a build thread on how to switch over to the SRW axle? I'd love to lower/bag my C30 but I'm not too sure about finding a wheel that fits.

comegetsome2003 · 01-01-2013, 09:05 AM

If you go back up and look at the pics i posted my truck actually started life as a SRW 1 ton....i have a build thread over on dually scene
Posted via Mobile Device

Big-Sexy907 · 01-01-2013, 02:26 PM

Quote:

Originally Posted by comegetsome2003

If you go back up and look at the pics i posted my truck actually started life as a SRW 1 ton....i have a build thread over on dually scene
Posted via Mobile Device

Happen to have a link to the thread? I searched for it on Duallyscene and couldn't find it.

jitteryguy · 01-01-2013, 03:43 PM

Quote:

Originally Posted by Big-Sexy907

Are you running a standard rear wheel or is this like TW&T's Tow Nasty wheel?

ya, mine are the TowNasty wheel's.

comegetsome2003 · 01-01-2013, 09:20 PM

Quote:

Originally Posted by Big-Sexy907

Happen to have a link to the thread? I searched for it on Duallyscene and couldn't find it.

Yea man here is the link....it covers my first dually that was bodied with an LS swap...after a couple years of frustration from a blown up motor and frame issue i started fresh with my current dually

http://www.duallyscene.com/forums/su...ene-t4916.html
Posted via Mobile Device

twotonecrew · 01-02-2013, 12:58 AM

Quote:

Originally Posted by North60

Good question, I will check when I get a chance. It does kick down but not as much as I would expect.
Posted via Mobile Device

Nice truck! I am usually not a big fan of the dual wheel look but yours is pretty sharp.

North60 · 01-02-2013, 04:28 PM

I am having a rough time finding some running boards for my 86 crew cab dually. Anyone have some suggestions?
Posted via Mobile Device

meatwagon83 · 01-02-2013, 05:23 PM

im having a hell of a time finding a pushbar, looks like i will be building one!

North60 · 01-02-2013, 05:25 PM

You would think there are enough trucks still on the road to keep them from being obsolete.
Posted via Mobile Device

meatwagon83 · 01-02-2013, 05:26 PM

Quote:

Originally Posted by North60

You would think there are enough trucks still on the road to keep them from being obsolete.
Posted via Mobile Device

you would think wouldnt you?

Chevyrules · 01-07-2013, 05:38 PM

ha ha that should be in 73/87 projects and builds

Black 'n' Blue · 01-09-2013, 01:00 AM

Took the sides off, much better. Gonna figure out a system for easy removal so I can take them off in 5 minutes.

meatwagon83 · 01-09-2013, 08:05 PM

is that the explosive truck?

Black 'n' Blue · 01-09-2013, 10:25 PM

Quote:

Originally Posted by meatwagon83

is that the explosive truck?

Yea it is.

12-31-2012, 04:30 PM	#4652
jlsanborn Registered User Join Date: Jun 2011 Location: Spokane, WA Posts: 2,372	Re: How about some pics of 73-91 crew cabs Q-jet I presume? With an electric choke I wouldn't think a low engine temp would keep it on fast idle. Do the secondaries open once its warm? Posted via Mobile Device __________________ '77 K30 3+3 - "The Crummy" http://67-72chevytrucks.com/vboard/s...d.php?t=640134 '67 C10 L/SWB - Soon to be daily driver! http://67-72chevytrucks.com/vboard/s...d.php?t=471776

12-31-2012, 04:38 PM	#4653
North60 Registered User Join Date: Dec 2012 Location: Whitehorse Yukon Territory Canada Posts: 23	Re: How about some pics of 73-91 crew cabs Good question, I will check when I get a chance. It does kick down but not as much as I would expect. Posted via Mobile Device Attached Images

12-31-2012, 04:40 PM	#4654
North60 Registered User Join Date: Dec 2012 Location: Whitehorse Yukon Territory Canada Posts: 23	Re: How about some pics of 73-91 crew cabs I assume qjet, buy all I have done is synthetic oil change and block heaters, I haven't even had the air cleaner off. It had been in the -35 c range for weeks. -1 today. Feels tropical. Posted via Mobile Device

12-31-2012, 04:41 PM	#4655
jlsanborn Registered User Join Date: Jun 2011 Location: Spokane, WA Posts: 2,372	Re: How about some pics of 73-91 crew cabs If it is a q-jet and you're into tinkering with that, pm me an email address. I have a great tech paper that's worth the read! Posted via Mobile Device __________________ '77 K30 3+3 - "The Crummy" http://67-72chevytrucks.com/vboard/s...d.php?t=640134 '67 C10 L/SWB - Soon to be daily driver! http://67-72chevytrucks.com/vboard/s...d.php?t=471776

12-31-2012, 04:53 PM	#4657
North60 Registered User Join Date: Dec 2012 Location: Whitehorse Yukon Territory Canada Posts: 23	Re: How about some pics of 73-91 crew cabs It's used for pushing light aircraft around Posted via Mobile Device

12-31-2012, 05:58 PM	#4658
jlsanborn Registered User Join Date: Jun 2011 Location: Spokane, WA Posts: 2,372	Re: How about some pics of 73-91 crew cabs That is pretty cool! __________________ '77 K30 3+3 - "The Crummy" http://67-72chevytrucks.com/vboard/s...d.php?t=640134 '67 C10 L/SWB - Soon to be daily driver! http://67-72chevytrucks.com/vboard/s...d.php?t=471776

01-01-2013, 07:17 AM	#4659
Big-Sexy907 Registered User Join Date: Jun 2012 Location: Palmer, AK Posts: 85	Re: How about some pics of 73-91 crew cabs Jittery / Comegetsome, what are you guys using for wheels? Trucks look great btw!

01-01-2013, 08:55 AM	#4661
comegetsome2003 Registered User Join Date: Dec 2012 Location: Baxley Ga Posts: 83	Re: How about some pics of 73-91 crew cabs Yea im also running 22.5s milled down to 22s.....my front suspension is narrowed 1 inch and im running a SRW rear end to get them tucked under the fenders Posted via Mobile Device

01-01-2013, 09:05 AM	#4663
comegetsome2003 Registered User Join Date: Dec 2012 Location: Baxley Ga Posts: 83	Re: How about some pics of 73-91 crew cabs If you go back up and look at the pics i posted my truck actually started life as a SRW 1 ton....i have a build thread over on dually scene Posted via Mobile Device __________________ 1991 Square CCLB Dually...laid out on 22s with an old noisy 12 valve

01-02-2013, 04:28 PM	#4668
North60 Registered User Join Date: Dec 2012 Location: Whitehorse Yukon Territory Canada Posts: 23	Re: How about some pics of 73-91 crew cabs I am having a rough time finding some running boards for my 86 crew cab dually. Anyone have some suggestions? Posted via Mobile Device

01-02-2013, 05:23 PM	#4669
meatwagon83 Registered User Join Date: Dec 2012 Location: Preble county ohio Posts: 1,914	Re: How about some pics of 73-91 crew cabs im having a hell of a time finding a pushbar, looks like i will be building one!

01-02-2013, 05:25 PM	#4670
North60 Registered User Join Date: Dec 2012 Location: Whitehorse Yukon Territory Canada Posts: 23	Re: How about some pics of 73-91 crew cabs You would think there are enough trucks still on the road to keep them from being obsolete. Posted via Mobile Device

01-07-2013, 05:38 PM	#4672
Chevyrules Registered User Join Date: Oct 2012 Location: plymouth county ma Posts: 200	Re: How about some pics of 73-91 crew cabs ha ha that should be in 73/87 projects and builds

01-09-2013, 01:00 AM	#4673
Black 'n' Blue Registered User Join Date: Jun 2011 Location: Calgary, AB, Canada Posts: 146	Re: How about some pics of 73-91 crew cabs Took the sides off, much better. Gonna figure out a system for easy removal so I can take them off in 5 minutes. __________________ -Justin. The past cannot be edited, or erased. Only accepted. Loud, proud and country by the grace of god! Bradley Anderson 1997-2011

01-09-2013, 08:05 PM	#4674
meatwagon83 Registered User Join Date: Dec 2012 Location: Preble county ohio Posts: 1,914	Re: How about some pics of 73-91 crew cabs is that the explosive truck?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.