Project "Just an Old Truck" - Page 19 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Rusbuilt · 02-24-2013, 03:17 PM

Nice arms!

Bennett68C10 · 02-24-2013, 06:58 PM

Nice arms buck

now hurry up and get those suckers installed.

C10_ustacould · 02-24-2013, 07:47 PM

Well, the test drive went okay but there was a glitch. The pads were rubbing on the "hat" portion of the rotor. Luckily my test drive was to a friends house so we pulled the wheels and calipers off and ground the backing plates on the pads for clearance. Another test drive and the ride home went well. Here is a pic of the groove the pad had started to make.

C10_ustacould · 02-24-2013, 07:49 PM

Quote:

Originally Posted by Bennett--G4L

Nice arms buck

now hurry up and get those suckers installed.

I am going to have to collect up some more parts first, mainly lower ball joints a new sway bar. Shouldn't be too awful long.

**Hart_Rod** · 02-24-2013, 07:58 PM

Quote:

Originally Posted by BucksSS

I am going to have to collect up some more parts first, mainly lower ball joints a new sway bar. Shouldn't be too awful long.

Check Rockauto for the ball joints, they were half of the price of the local parts stores.

C10_ustacould · 02-24-2013, 08:19 PM

Quote:

Originally Posted by Hart_Rod

Check Rockauto for the ball joints, they were half of the price of the local parts stores.

I think you are spot on with that suggestion Rob, Thanks! You don't happen to have a sway bar that will work with PB arms do ya?

**lolife99** · 02-24-2013, 08:26 PM

Quote:

Originally Posted by BucksSS

I think you are spot on with that suggestion Rob, Thanks! You don't happen to have a sway bar that will work with PB arms do ya?

Get an Addco bar.
Not sure on a source,... but Porterbuilt sells them.
Stock and a narrowed version for the Dropmember.
Edit:
http://www.summitracing.com/parts/ac...del/c10-pickup

C10_ustacould · 02-24-2013, 08:45 PM

Thanks for the link Keith!

**lolife99** · 02-24-2013, 08:47 PM

I don't know what difference there would be.
One is listed as 73-87.
Both are 1-1/8".
Buy the cheaper one!
http://www.addco.net/aftermarket/catalog/chevrolet/

C10_ustacould · 02-24-2013, 08:50 PM

Yeah I deleted all that babble. I think your link was the correct bar.

Chvy2NV · 02-25-2013, 01:08 AM

Quote:

Originally Posted by jmedero

Road trip!!!
Posted via Mobile Device

Heck yea!!!

Quote:

Originally Posted by BucksSS

It's funny you say that, I am thinking about doing a thread about all of the things I believe I've done wrong on this build. Now I need some PB parts to center the rear wheels too, I guess I'm going to have to contact Nate

Thanks, I am trying my best to build a solid driver. You never know, when Rob gets his LS swap done we may just swing down your way for a visit!

Posted via Mobile Device
That would be awesome!!

**cericd** · 02-25-2013, 10:29 AM

Quote:

Originally Posted by BucksSS

It's funny you say that, I am thinking about doing a thread about all of the things I believe I've done wrong on this build.

Quote:

Originally Posted by Chvy2NV

Heck yea!!!

Posted via Mobile Device
That would be awesome!!

I agree!

**67cheby** · 02-25-2013, 11:32 AM

man, it is looking great !

shearjs · 02-25-2013, 06:22 PM

Love the truck! This is one of my favorites. If you don't mind me asking, what did you use for the shift linkage from column to tranny?

shawno72 · 02-25-2013, 07:18 PM

Very nice!!

PBFAB.COM · 02-25-2013, 09:32 PM

The addco bar that we sell is 1.25 od. they make it special for us.....at least that's what they tell us!

Nate
Posted via Mobile Device

C10_ustacould · 02-25-2013, 09:35 PM

Quote:

Originally Posted by Porterbuilt Street Rods

The addco bar that we sell is 1.25 od. they make it special for us.....at least that's what they tell us!

Nate
Posted via Mobile Device

Thanks Nate maybe I'll order one with the trailing arm crossmember we are discussing.

C10_ustacould · 02-25-2013, 10:05 PM

Quote:

Originally Posted by 67cheby

man, it is looking great !

Thanks Mike, I appreciate it.

Quote:

Originally Posted by shearjs

Love the truck! This is one of my favorites. If you don't mind me asking, what did you use for the shift linkage from column to tranny?

I used the Lokar shift linkage you can check it out here: http://www.summitracing.com/parts/lok-aca-1800

Quote:

Originally Posted by shawno72

Very nice!!

Thanks bro, I wish I could come out and do one of your cruise nights! So jealous...

shearjs · 02-26-2013, 02:56 PM

Quote:

Originally Posted by BucksSS

Thanks Mike, I appreciate it.

I used the Lokar shift linkage you can check it out here: http://www.summitracing.com/parts/lok-aca-1800

Thanks bro, I wish I could come out and do one of your cruise nights! So jealous...

Thanks Buck. I just installed the column cable shift from Lokar last weekend but had a little trouble getting things dialed in. Does your shift indicator on your column match up pretty well to the actual gear that you're in? Mine seems to be off a bit with the cable, but it may just need more adjusting. Or maybe I should just get the solid linkage as you did. Thanks.

C10_ustacould · 02-26-2013, 04:37 PM

Quote:

Originally Posted by shearjs

Thanks Buck. I just installed the column cable shift from Lokar last weekend but had a little trouble getting things dialed in. Does your shift indicator on your column match up pretty well to the actual gear that you're in? Mine seems to be off a bit with the cable, but it may just need more adjusting. Or maybe I should just get the solid linkage as you did. Thanks.

No, mine is only correct in Park and Drive. I think I could get it pretty close by adjusting where the pushrod attaches to arm on the transmission, but I am just not that worried about it. Maybe someday i'll spend some time on it.

Xeen · 02-27-2013, 02:42 AM

Quote:

Originally Posted by BucksSS

No, mine is only correct in Park and Drive. I think I could get it pretty close by adjusting where the pushrod attaches to arm on the transmission, but I am just not that worried about it. Maybe someday i'll spend some time on it.

I saw where a guy lengthened the arm on the column to get his to be in the correct position on the indicator, apparently it works, however I don't know if there is a "correct" way to do it and if that's it or not, that's up to the engineers to argue over.

C10_ustacould · 02-27-2013, 08:45 AM

If you look at the lever that bolts to the shaft on the transmission you'll see it's sloted allowing the distance from the fulcrum (pivot point) to increase or decrease. I think if I spend some time tinkering with this adjustment I could get the shift indicator to be fairly accurate. But for know park and drive will do.

**Hart_Rod** · 02-27-2013, 09:50 AM

Quote:

Originally Posted by BucksSS

If you look at the lever that bolts to the shaft on the transmission you'll see it's sloted allowing the distance from the fulcrum (pivot point) to increase or decrease. I think if I spend some time tinkering with this adjustment I could get the shift indicator to be fairly accurate. But for know park and drive will do.

OBTW, LOKAR sells a longer rod if the one you have doesn't work. Are you ready to pull a motor Saturday?????

C10_ustacould · 02-27-2013, 09:59 AM

Yes I am! Gonna send you a PM, check your inbox.

shawno72 · 02-27-2013, 10:00 AM

Quote:

Originally Posted by BucksSS

Thanks bro, I wish I could come out and do one of your cruise nights! So jealous...

Anytime you wanna come and cruise with us, you would be treated as family. The more trucks the merrier and everyone is such a great group of guys and gals.

Posted via Mobile Device

02-24-2013, 03:17 PM	#451
Rusbuilt Registered User Join Date: Mar 2012 Location: Knoxville, TN Posts: 5,381	Re: Project "Just an Old Truck" Nice arms! __________________ -Rus PLEASE HELP WITH PROJECT UNDERHAULINPaypal donations accepted @ rus1785@yahoo.com Rusbuilt's garage 1968 Chevy C-30 Darcy SOLD Rusbuilt shop truck *SOLD*

02-24-2013, 06:58 PM	#452
Bennett68C10 Registered User Join Date: Dec 2006 Location: Toms River, NJ Posts: 5,518	Re: Project "Just an Old Truck" Nice arms buck now hurry up and get those suckers installed. __________________ Keith 66 Suburban Burb Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=751361 IG: bennett68c10

02-24-2013, 07:47 PM	#453
C10_ustacould A day late and $1 short... Join Date: Dec 2008 Location: Northwest FL Posts: 3,877	Re: Project "Just an Old Truck" Well, the test drive went okay but there was a glitch. The pads were rubbing on the "hat" portion of the rotor. Luckily my test drive was to a friends house so we pulled the wheels and calipers off and ground the backing plates on the pads for clearance. Another test drive and the ride home went well. Here is a pic of the groove the pad had started to make. Attached Images __________________ Buck Instagram: C10_ustacould 1963 SWB Fleet Side 528 Desert Beige Milly 1967 SWB Step Side 506 Medium Blue The Old Girl 1968 SWB Fleet Side 503 Light Green Ellie SOLD 1965 SWB Fleet Side 507 Light Blue Prescription Strength SOLD 1971 SWB Fleet Side 521 White Shiro SOLD 1968 SWB Step Side 503 Light Green My Old Farm Truck SOLD

02-24-2013, 08:45 PM	#458
C10_ustacould A day late and $1 short... Join Date: Dec 2008 Location: Northwest FL Posts: 3,877	Re: Project "Just an Old Truck" Thanks for the link Keith! __________________ Buck Instagram: C10_ustacould 1963 SWB Fleet Side 528 Desert Beige Milly 1967 SWB Step Side 506 Medium Blue The Old Girl 1968 SWB Fleet Side 503 Light Green Ellie SOLD 1965 SWB Fleet Side 507 Light Blue Prescription Strength SOLD 1971 SWB Fleet Side 521 White Shiro SOLD 1968 SWB Step Side 503 Light Green My Old Farm Truck SOLD

02-24-2013, 08:47 PM	#459
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,699	Re: Project "Just an Old Truck" I don't know what difference there would be. One is listed as 73-87. Both are 1-1/8". Buy the cheaper one! http://www.addco.net/aftermarket/catalog/chevrolet/ __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

02-24-2013, 08:50 PM	#460
C10_ustacould A day late and $1 short... Join Date: Dec 2008 Location: Northwest FL Posts: 3,877	Re: Project "Just an Old Truck" Yeah I deleted all that babble. I think your link was the correct bar. __________________ Buck Instagram: C10_ustacould 1963 SWB Fleet Side 528 Desert Beige Milly 1967 SWB Step Side 506 Medium Blue The Old Girl 1968 SWB Fleet Side 503 Light Green Ellie SOLD 1965 SWB Fleet Side 507 Light Blue Prescription Strength SOLD 1971 SWB Fleet Side 521 White Shiro SOLD 1968 SWB Step Side 503 Light Green My Old Farm Truck SOLD

02-25-2013, 11:32 AM	#463
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Project "Just an Old Truck" man, it is looking great ! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

02-25-2013, 06:22 PM	#464
shearjs Registered User Join Date: Mar 2011 Location: Thompsons Station, TN Posts: 700	Re: Project "Just an Old Truck" Love the truck! This is one of my favorites. If you don't mind me asking, what did you use for the shift linkage from column to tranny? __________________ -Jason '72 Family Hauler Rufus' Restoration - 70 GMC, LS swap - SOLD

02-25-2013, 07:18 PM	#465
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: Project "Just an Old Truck" Very nice!! __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

02-25-2013, 09:32 PM	#466
PBFAB.COM Senior Member Join Date: Dec 2003 Location: Mesa,Az Posts: 3,981	Re: Project "Just an Old Truck" The addco bar that we sell is 1.25 od. they make it special for us.....at least that's what they tell us! Nate Posted via Mobile Device __________________ www.PorterbuiltFabrication.com Phone: 480-297-2621 E-mail: sales@pbfab.com Find us on FaceBook under Porterbuilt Fabrication Specializing in Chassis and Suspension Components for your Classic Chevrolet Truck. We offer components from the following manufacturers: Porterbuilt Accuair Ridetech (Air Ride Technologies) Air Lift Wilwood Intro Unisteer ECE Gotta Show Air Lift Borgeson CPP Supporting this forum since 2003!

02-27-2013, 08:45 AM	#472
C10_ustacould A day late and $1 short... Join Date: Dec 2008 Location: Northwest FL Posts: 3,877	Re: Project "Just an Old Truck" If you look at the lever that bolts to the shaft on the transmission you'll see it's sloted allowing the distance from the fulcrum (pivot point) to increase or decrease. I think if I spend some time tinkering with this adjustment I could get the shift indicator to be fairly accurate. But for know park and drive will do. Attached Images __________________ Buck Instagram: C10_ustacould 1963 SWB Fleet Side 528 Desert Beige Milly 1967 SWB Step Side 506 Medium Blue The Old Girl 1968 SWB Fleet Side 503 Light Green Ellie SOLD 1965 SWB Fleet Side 507 Light Blue Prescription Strength SOLD 1971 SWB Fleet Side 521 White Shiro SOLD 1968 SWB Step Side 503 Light Green My Old Farm Truck SOLD

02-27-2013, 09:59 AM	#474
C10_ustacould A day late and $1 short... Join Date: Dec 2008 Location: Northwest FL Posts: 3,877	Re: Project "Just an Old Truck" Yes I am! Gonna send you a PM, check your inbox. __________________ Buck Instagram: C10_ustacould 1963 SWB Fleet Side 528 Desert Beige Milly 1967 SWB Step Side 506 Medium Blue The Old Girl 1968 SWB Fleet Side 503 Light Green Ellie SOLD 1965 SWB Fleet Side 507 Light Blue Prescription Strength SOLD 1971 SWB Fleet Side 521 White Shiro SOLD 1968 SWB Step Side 503 Light Green My Old Farm Truck SOLD Last edited by C10_ustacould; 05-08-2016 at 11:14 PM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.