Do you need '64-'66 Chevy Truck Parts? - Page 19 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

*LILRED66* · 01-16-2009, 10:41 AM

I am looking for a factory "hard pipe" radiator hose, like this one. If you have one, I am willing to trade for parts you need.

joe231 · 01-16-2009, 11:09 AM

Quote:

Originally Posted by LILRED66

Thanks for the inquiry. I have a few good, used factory bench bottom foam inserts. They are $60.00, plus $32.00, packaging & shipping.

Please let me know if I can help you with this item or other 4-5-6 Chevy truck parts in the future.

cool Thanks, can you get pics?

oh and also wondering about a auto column shift lever and retainer pin to use in my factory auto column.
and do you have an auto cross member with the e-brake bar?
like this one....

*LILRED66* · 01-16-2009, 11:22 AM

I don't currently have any pictures, but I will get a few...after the mild blizzard and 8 degree weather clears up.

joe231 · 01-16-2009, 11:36 AM

i edited my previous post
thought of some other stuff

*LILRED66* · 01-20-2009, 05:54 PM

I have a factory automatic transmission cross member, but it does not have the e-brake assembly, as shown in your picture. The holes are there, but no assembly. Unfortunately, the only auto shift lever and keeper pin is on a complete column that is ear-marked for my '66 Chevy K10, BCKNBLK.

Sorry I couldn't help you with these items, but please keep me in mind for other 4-5-6 Chevy truck parts in the future.

joe231 · 01-20-2009, 06:10 PM

Thanks Tony,
i'm still interested in the seat bottom foam.
and how about the lower U pieces and the upper holder for a desert cooler radiator, oh and rubber also if you have them....

*LILRED66* · 01-20-2009, 06:32 PM

Joe:

Thanks for your interest. I have a set of lower radiator tank cradles & rubber cushions, as well as, a top radiator support & rubber cushions for a 4-core Desert Cooler radiator.

283 Man · 01-20-2009, 07:24 PM

Tony, looking for a good running 283 motor for my new 66 .do you have one and price of it?? Would you do a trade on it??? got few exta parts that you might be interested in.. THANKS MORTON

*LILRED66* · 01-20-2009, 07:43 PM

Morton:

Good to hear from you. The only 283 I have is from my '66 Chevy C20 Custom Camper, but it is making a noise on the lower end and I can't figure it out. I pulled it, so I wouldn't do any damage to it, since it was original to the truck. It is on one of my engine dollies right now.

It started and ran fine, without overheating or anything, but I couldn't figure out the origin of the noise, even after replacing the timing chain and gears. It may not be something you want to deal with or try trouble-shooting, so I am not sure if I can help you.

283 Man · 01-20-2009, 08:21 PM

how much do you want for it? I love tinkering with them.got a running 230 and 3 speed trans. out of(63 LILBLUE) Id trade you for the 283 motor??Been away form my hobby a while going thur a Divorce!

*LILRED66* · 01-20-2009, 08:31 PM

Morton:

Thanks for the offer to trade the six/3-speed from the '63, but I prefer the factory 283 and 327 motors for my rigs.

Sorry to hear about the big "D". I didn't know you were going through that. Good luck.

joe231 · 01-20-2009, 11:49 PM

Quote:

Originally Posted by LILRED66

Joe:

Thanks for your interest. I have a set of lower radiator tank cradles & rubber cushions, as well as, a top radiator support & rubber cushions for a 4-core Desert Cooler radiator.

got pics of the foam yet? no hurry, just checking

how much for the radiator parts?

oh and did you ever find a factory washer reservoir and bracket?

i'm planning a trip to see you soon

shortbed70 · 01-21-2009, 07:34 PM

Do you have anymore pics of the 64-66 cabs? I think I'm going to do this other than put 400+ into my cab. I thought there were some on here but couldn't find them.

*LILRED66* · 01-21-2009, 08:22 PM

Quote:

Originally Posted by joe231

got pics of the foam yet? no hurry, just checking

how much for the radiator parts?

oh and did you ever find a factory washer reservoir and bracket?

i'm planning a trip to see you soon

Here are two different factory foam seat bottoms. Both have some wear on the drivers area, but they are useable and can be repaired piecing in a good chunk of seat foam.

The top radiator support, cushions and bottom craddles & cushions are $40.00, plus $8.00 packanging & shipping.

I don't have a good, used wiper fluid bottle, but I do have a few good, used factory wiper fluid bottle brackets. They are $20.00, plus $6.00 packaging & shipping.

I can combine shipping or you can make a trip up to my shop to pick up in person. Please let me know your thoughts on these items or other 4-5-6 Chevy truck parts in the future.

*LILRED66* · 01-21-2009, 08:32 PM

Quote:

Originally Posted by shortbed70

Do you have anymore pics of the 64-66 cabs? I think I'm going to do this other than put 400+ into my cab. I thought there were some on here but couldn't find them.

Here are a few more.

*LILRED66* · 01-21-2009, 09:38 PM

and a few more of the cab.

*LILRED66* · 01-21-2009, 09:40 PM

Don't let the surface rust scare you...it is very solid, but the previous owner stripped it, but did not protect with primer, so it has lots of natural rust patina.

joe231 · 01-21-2009, 09:48 PM

Quote:

Originally Posted by LILRED66

Here are two different factory foam seat bottoms. Both have some wear on the drivers area, but they are useable and can be repaired piecing in a good chunk of seat foam.

The top radiator support, cushions and bottom craddles & cushions are $40.00, plus $8.00 packanging & shipping.

I don't have a good, used wiper fluid bottle, but I do have a few good, used factory wiper fluid bottle brackets. They are $20.00, plus $6.00 packaging & shipping.

I can combine shipping or you can make a trip up to my shop to pick up in person. Please let me know your thoughts on these items or other 4-5-6 Chevy truck parts in the future.

cool, thanks Tony
that foam doesn't look better than what we have so I'll pass on it, but i want the radiator parts and the washer bottle bracket.
I am planning on coming your way in the next few weeks, I will let you know soon
Thanks!

jgh64pkup · 01-22-2009, 01:58 PM

Quote:

Originally Posted by LILRED66

I have a complete set, including the glove box door hinge, glove box button and the mounting screws. How about $20.00, including packaging & shipping?

Please let me know if I can help you with these items or other 4-5-6 Chevy truck parts in the future.

I will pm you

shortbed70 · 01-22-2009, 08:18 PM

Thank you let me see what I can do I'll let you know.

*LILRED66* · 01-22-2009, 09:45 PM

Quote:

Originally Posted by joe231

cool, thanks Tony
that foam doesn't look better than what we have so I'll pass on it, but i want the radiator parts and the washer bottle bracket.
I am planning on coming your way in the next few weeks, I will let you know soon
Thanks!

How about $25.00 for the radiator support, lower craddle and cushions and $15.00 for the washer bottle bracket for a total of $40.00, including packaging & shipping? Do you want to do the deal now or wait until you come up to KC?

*LILRED66* · 01-22-2009, 09:50 PM

Quote:

Originally Posted by jgh64pkup

I will pm you

I received your PM and replied. Please let me know if I can help you with these items or other 4-5-6 Chevy truck parts in the future.

*LILRED66* · 01-22-2009, 09:53 PM

Quote:

Originally Posted by shortbed70

Thank you let me see what I can do I'll let you know.

Great, thanks and let me know your intentions and please keep me in mind for other 4-5-6 Chevy truck parts in the future.

dirty trucker · 01-23-2009, 10:08 AM

Hello, I usually hang-out on the Blazer board, but my father-in-law just picked up a 65' swb fleet from Chattanooga. The box has some very shady bodywork, do you have any nice boxes sitting around?? And what do they go for?? I'll pass the word along.
Thanks
Joe

*LILRED66* · 01-27-2009, 12:58 AM

dirty trucker:

Thanks for the inquiry. I just sold the last decent swb fleetside that I had in my inventory. I come across them from time-to-time, so I will post a thread when the next one comes along.

Sorry I couldn't help you with this item, but please keep me in mind for your other 4-5-6 Chevy truck parts in the future.

01-16-2009, 10:41 AM	#451
LILRED66 Account Suspended Join Date: May 2005 Location: Kansas City, KS Posts: 3,906	Re: Do you need '64-'66 Chevy Truck Parts? I am looking for a factory "hard pipe" radiator hose, like this one. If you have one, I am willing to trade for parts you need. Attached Images

01-16-2009, 11:22 AM	#453
LILRED66 Account Suspended Join Date: May 2005 Location: Kansas City, KS Posts: 3,906	Re: Do you need '64-'66 Chevy Truck Parts? I don't currently have any pictures, but I will get a few...after the mild blizzard and 8 degree weather clears up.

01-16-2009, 11:36 AM	#454
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: Do you need '64-'66 Chevy Truck Parts? i edited my previous post thought of some other stuff __________________ *CHEVY ONLY*

01-20-2009, 05:54 PM	#455
LILRED66 Account Suspended Join Date: May 2005 Location: Kansas City, KS Posts: 3,906	Re: Do you need '64-'66 Chevy Truck Parts? I have a factory automatic transmission cross member, but it does not have the e-brake assembly, as shown in your picture. The holes are there, but no assembly. Unfortunately, the only auto shift lever and keeper pin is on a complete column that is ear-marked for my '66 Chevy K10, BCKNBLK. Sorry I couldn't help you with these items, but please keep me in mind for other 4-5-6 Chevy truck parts in the future.

01-20-2009, 06:10 PM	#456
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: Do you need '64-'66 Chevy Truck Parts? Thanks Tony, i'm still interested in the seat bottom foam. and how about the lower U pieces and the upper holder for a desert cooler radiator, oh and rubber also if you have them.... __________________ *CHEVY ONLY* Last edited by joe231; 01-20-2009 at 06:10 PM.

01-20-2009, 06:32 PM	#457
LILRED66 Account Suspended Join Date: May 2005 Location: Kansas City, KS Posts: 3,906	Re: Do you need '64-'66 Chevy Truck Parts? Joe: Thanks for your interest. I have a set of lower radiator tank cradles & rubber cushions, as well as, a top radiator support & rubber cushions for a 4-core Desert Cooler radiator. Attached Images

01-20-2009, 07:24 PM	#458
283 Man Registered User Join Date: Apr 2007 Location: Jane,Missouri Posts: 844	Re: Do you need '64-'66 Chevy Truck Parts? Tony, looking for a good running 283 motor for my new 66 .do you have one and price of it?? Would you do a trade on it??? got few exta parts that you might be interested in.. THANKS MORTON __________________ 283 the mighty small block

01-20-2009, 07:43 PM	#459
LILRED66 Account Suspended Join Date: May 2005 Location: Kansas City, KS Posts: 3,906	Re: Do you need '64-'66 Chevy Truck Parts? Morton: Good to hear from you. The only 283 I have is from my '66 Chevy C20 Custom Camper, but it is making a noise on the lower end and I can't figure it out. I pulled it, so I wouldn't do any damage to it, since it was original to the truck. It is on one of my engine dollies right now. It started and ran fine, without overheating or anything, but I couldn't figure out the origin of the noise, even after replacing the timing chain and gears. It may not be something you want to deal with or try trouble-shooting, so I am not sure if I can help you.

01-20-2009, 08:21 PM	#460
283 Man Registered User Join Date: Apr 2007 Location: Jane,Missouri Posts: 844	Re: Do you need '64-'66 Chevy Truck Parts? how much do you want for it? I love tinkering with them.got a running 230 and 3 speed trans. out of(63 LILBLUE) Id trade you for the 283 motor??Been away form my hobby a while going thur a Divorce! __________________ 283 the mighty small block

01-20-2009, 08:31 PM	#461
LILRED66 Account Suspended Join Date: May 2005 Location: Kansas City, KS Posts: 3,906	Re: Do you need '64-'66 Chevy Truck Parts? Morton: Thanks for the offer to trade the six/3-speed from the '63, but I prefer the factory 283 and 327 motors for my rigs. Sorry to hear about the big "D". I didn't know you were going through that. Good luck.

01-21-2009, 07:34 PM	#463
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: Do you need '64-'66 Chevy Truck Parts? Do you have anymore pics of the 64-66 cabs? I think I'm going to do this other than put 400+ into my cab. I thought there were some on here but couldn't find them. __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

01-21-2009, 09:38 PM	#466
LILRED66 Account Suspended Join Date: May 2005 Location: Kansas City, KS Posts: 3,906	Re: Do you need '64-'66 Chevy Truck Parts? and a few more of the cab. Attached Images

01-21-2009, 09:40 PM	#467
LILRED66 Account Suspended Join Date: May 2005 Location: Kansas City, KS Posts: 3,906	Re: Do you need '64-'66 Chevy Truck Parts? Don't let the surface rust scare you...it is very solid, but the previous owner stripped it, but did not protect with primer, so it has lots of natural rust patina.

01-22-2009, 08:18 PM	#470
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: Do you need '64-'66 Chevy Truck Parts? Thank you let me see what I can do I'll let you know. __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

01-23-2009, 10:08 AM	#474
dirty trucker Registered User Join Date: May 2008 Location: AuGres, Mi Posts: 82	Re: Do you need '64-'66 Chevy Truck Parts? Hello, I usually hang-out on the Blazer board, but my father-in-law just picked up a 65' swb fleet from Chattanooga. The box has some very shady bodywork, do you have any nice boxes sitting around?? And what do they go for?? I'll pass the word along. Thanks Joe



Register or Log In To remove these advertisements.

01-27-2009, 12:58 AM	#475
LILRED66 Account Suspended Join Date: May 2005 Location: Kansas City, KS Posts: 3,906	Re: Do you need '64-'66 Chevy Truck Parts? dirty trucker: Thanks for the inquiry. I just sold the last decent swb fleetside that I had in my inventory. I come across them from time-to-time, so I will post a thread when the next one comes along. Sorry I couldn't help you with this item, but please keep me in mind for your other 4-5-6 Chevy truck parts in the future.

Register or Log In To remove these advertisements.