My 93 CCSSB - Page 19 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

joe231 · 04-25-2010, 01:00 AM

cool!

*highperf4x4* · 04-25-2010, 01:25 AM

So are you planning on pulling with the 3/4 or still trying to get the crew ready too?

Man you are going to be busy.

scotts62 · 04-25-2010, 10:19 AM

Ill just pull it with the ugly green machine unless i can pull off a miracle

JohnC · 04-25-2010, 11:47 AM

Quote:

Originally Posted by scotts62

Ill just pull it with the ugly green machine unless i can pull off a miracle

You Can Do It!

scotts62 · 04-25-2010, 12:57 PM

scotts62 · 05-14-2010, 11:56 AM

I havent done much at all to the crew, Joe did happen to run to Pull-a-part and picked up a lower control arm for me while he was out there, now i can start the front end swap well after the 62 gets a little farther of coarse

bjcaldwe · 05-14-2010, 11:57 AM

It is too bad with all the rain. I would like to go rummaging out at pullapart.

JohnC · 05-14-2010, 12:10 PM

Yeah, but we will be wanting this rain in a few months.

scotts62 · 05-14-2010, 12:10 PM

I know me too! I need some stuff.. just odd and end pieces and parts but its still cool to go out there.

I took my father in law one time to look for a door handle for his car and he said "Look at all the s**t, ive never seen so much junk in my life" i wanted to slap him and say man these are good parts and a lot cheaper that dealer or after market stuff

bjcaldwe · 05-14-2010, 12:12 PM

I just like looking at stuff and day dreaming what I would do with it. There was one afternoon at work I was just stressed out of my mind with bs and deadlines. So, I took off the last two hours of the day and just went and walked around there and cleared my head.

scotts62 · 05-14-2010, 12:15 PM

Yeah i do the same, pay the buck and just see what you can find and cant live without

bjcaldwe · 05-14-2010, 12:19 PM

Last time I found a gm antenna adaptor. I showed it to the guy and he waved me through. Those things are like 8-10 bucks. I bought one right before that and a week later I found one my old roommate left in the closet of his old room lol.

scotts62 · 05-14-2010, 12:19 PM

thats funny

*BGRAFX* · 05-14-2010, 12:48 PM

I went to the picknpull yesterday, $2 to walk around, didn't find what I was looking for and everything was all hacked up. But there is a clean 87chevy that they will be moing out into the yard hopefully this weekend so I will be busy.

always like taking pix at the chevy trucks.

scotts62 · 05-14-2010, 12:55 PM

Heck yeah! Post em up!

*BGRAFX* · 05-14-2010, 01:32 PM

I put them in my build thread, and I will add more as I go, Man your crew is looking good!

scotts62 · 05-14-2010, 01:46 PM

Cool ill check them out, Thanks! Just need to figure out why its not running quite right

JohnC · 05-14-2010, 01:49 PM

Quote:

Originally Posted by scotts62

Cool ill check them out, Thanks! Just need to figure out why its not running quite right

Because you are working on the 62?

scotts62 · 05-14-2010, 01:54 PM

well that too but when i take a break from it ill mess with the crew im jumping back and forth and its making me

scotts62 · 05-23-2010, 10:20 AM

Did a compression test on it yesterday while i was out there, here are the numbers..

Not too happy with #7 cylinder but at least its enough to fire the plug...

joe231 · 05-23-2010, 10:26 AM

isn't that the #7 cylinder?
are big blocks numbered the same as small blocks?

scotts62 · 05-23-2010, 10:28 AM

Quote:

Originally Posted by joe231

isn't that the #7 cylinder?
are big blocks numbered the same as small blocks?

Yeah, sorry had a my bad moment... you must have saw the first post when it was #8

joe231 · 05-23-2010, 10:48 AM

good, I thought I was loosing it

scotts62 · 05-23-2010, 10:51 AM

Thats what you think

Any luck with a schematic or whatever he was looking into?

joe231 · 05-23-2010, 11:06 AM

He is working on it, we need to find a OBD-I scanner or I need to build this

http://www.techedge.com.au/vehicle/aldl8192/8192hw.htm
so we can use my laptop to view the data stream.
he also thinks, by the code from the computer, that someone may have swapped in an older computer.....the plot thickens.....

04-25-2010, 01:00 AM	#451
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: My 93 Crewcab Build cool! __________________ *CHEVY ONLY*

04-25-2010, 01:25 AM	#452
highperf4x4 Account Suspended Join Date: Apr 2009 Location: Oklahoma City Posts: 4,709	Re: My 93 Crewcab Build So are you planning on pulling with the 3/4 or still trying to get the crew ready too? Man you are going to be busy.

04-25-2010, 10:19 AM	#453
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,240	Re: My 93 Crewcab Build Ill just pull it with the ugly green machine unless i can pull off a miracle __________________ Scott 93 crew cab build Project 62

04-25-2010, 12:57 PM	#455
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,240	Re: My 93 Crewcab Build __________________ Scott 93 crew cab build Project 62

05-14-2010, 11:56 AM	#456
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,240	Re: My 93 Crewcab Build I havent done much at all to the crew, Joe did happen to run to Pull-a-part and picked up a lower control arm for me while he was out there, now i can start the front end swap well after the 62 gets a little farther of coarse __________________ Scott 93 crew cab build Project 62

05-14-2010, 11:57 AM	#457
bjcaldwe Registered User Join Date: Aug 2009 Location: OKC, OK Posts: 1,169	Re: My 93 Crewcab Build It is too bad with all the rain. I would like to go rummaging out at pullapart. __________________ My AD Truck Build Thread 52 GMC one day laying on the running boards 2004 Chevy Crewcab. 3/5 and notched

05-14-2010, 12:10 PM	#458
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: My 93 Crewcab Build Yeah, but we will be wanting this rain in a few months.

05-14-2010, 12:10 PM	#459
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,240	Re: My 93 Crewcab Build I know me too! I need some stuff.. just odd and end pieces and parts but its still cool to go out there. I took my father in law one time to look for a door handle for his car and he said "Look at all the s**t, ive never seen so much junk in my life" i wanted to slap him and say man these are good parts and a lot cheaper that dealer or after market stuff __________________ Scott 93 crew cab build Project 62

05-14-2010, 12:12 PM	#460
bjcaldwe Registered User Join Date: Aug 2009 Location: OKC, OK Posts: 1,169	Re: My 93 Crewcab Build I just like looking at stuff and day dreaming what I would do with it. There was one afternoon at work I was just stressed out of my mind with bs and deadlines. So, I took off the last two hours of the day and just went and walked around there and cleared my head. __________________ My AD Truck Build Thread 52 GMC one day laying on the running boards 2004 Chevy Crewcab. 3/5 and notched

05-14-2010, 12:15 PM	#461
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,240	Re: My 93 Crewcab Build Yeah i do the same, pay the buck and just see what you can find and cant live without __________________ Scott 93 crew cab build Project 62

05-14-2010, 12:19 PM	#462
bjcaldwe Registered User Join Date: Aug 2009 Location: OKC, OK Posts: 1,169	Re: My 93 Crewcab Build Last time I found a gm antenna adaptor. I showed it to the guy and he waved me through. Those things are like 8-10 bucks. I bought one right before that and a week later I found one my old roommate left in the closet of his old room lol. __________________ My AD Truck Build Thread 52 GMC one day laying on the running boards 2004 Chevy Crewcab. 3/5 and notched

05-14-2010, 12:19 PM	#463
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,240	Re: My 93 Crewcab Build thats funny __________________ Scott 93 crew cab build Project 62

05-14-2010, 12:48 PM	#464
BGRAFX Account Suspended Join Date: Jun 2009 Location: kansas city Ks Posts: 1,970	Re: My 93 Crewcab Build I went to the picknpull yesterday, $2 to walk around, didn't find what I was looking for and everything was all hacked up. But there is a clean 87chevy that they will be moing out into the yard hopefully this weekend so I will be busy. always like taking pix at the chevy trucks.

05-14-2010, 12:55 PM	#465
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,240	Re: My 93 Crewcab Build Heck yeah! Post em up! __________________ Scott 93 crew cab build Project 62

05-14-2010, 01:32 PM	#466
BGRAFX Account Suspended Join Date: Jun 2009 Location: kansas city Ks Posts: 1,970	Re: My 93 Crewcab Build I put them in my build thread, and I will add more as I go, Man your crew is looking good!



Register or Log In To remove these advertisements.

05-14-2010, 01:46 PM	#467
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,240	Re: My 93 Crewcab Build Cool ill check them out, Thanks! Just need to figure out why its not running quite right __________________ Scott 93 crew cab build Project 62

05-14-2010, 01:54 PM	#469
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,240	Re: My 93 Crewcab Build well that too but when i take a break from it ill mess with the crew im jumping back and forth and its making me __________________ Scott 93 crew cab build Project 62

05-23-2010, 10:20 AM	#470
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,240	Re: My 93 Crewcab Build Did a compression test on it yesterday while i was out there, here are the numbers.. Not too happy with #7 cylinder but at least its enough to fire the plug... __________________ Scott 93 crew cab build Project 62 Last edited by scotts62; 05-23-2010 at 10:22 AM.

05-23-2010, 10:26 AM	#471
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: My 93 Crewcab Build isn't that the #7 cylinder? are big blocks numbered the same as small blocks? __________________ *CHEVY ONLY*

05-23-2010, 10:48 AM	#473
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: My 93 Crewcab Build good, I thought I was loosing it __________________ *CHEVY ONLY*

05-23-2010, 10:51 AM	#474
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,240	Re: My 93 Crewcab Build Thats what you think Any luck with a schematic or whatever he was looking into? __________________ Scott 93 crew cab build Project 62

05-23-2010, 11:06 AM	#475
joe231 Registered User Join Date: Dec 2007 Location: Palmer, Alaska Posts: 13,821	Re: My 93 Crewcab Build He is working on it, we need to find a OBD-I scanner or I need to build this http://www.techedge.com.au/vehicle/aldl8192/8192hw.htm so we can use my laptop to view the data stream. he also thinks, by the code from the computer, that someone may have swapped in an older computer.....the plot thickens..... __________________ *CHEVY ONLY*

Register or Log In To remove these advertisements.