Project 67 DRGNWGN - 67 Burban!! - Page 19 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**kev2809** · 08-03-2011, 10:35 PM

finally!

first coat

second coat (was dark outside, so the paint looks wetter and darker but its not)

i think it came out pretty good, not show quality but im happy with it! the filler really shows through the primer, like it soaked it up or something... will start wetsanding either tomorrow night or friday night, then shoot the paint over the weekend

VA72C10 · 08-03-2011, 10:42 PM

I am not a paint expert but should you consider sealer since the primer did that with the filler? It seals everything to prevent it from coming through in your final paint...maybe ask the question on the paint forum?

**kev2809** · 08-03-2011, 11:10 PM

good point..i believe this primer can be thinned for a sealer too. im not sure if i should though because the paint im using is valspar tractor paint (acrylic enamel) and it lays pretty thick. i plan on spraying 2 coats..but i think i will see if one of the paint guys chime in to make sure!

**kev2809** · 08-08-2011, 11:01 AM

well..i will probably wait on the paint on this thing. i think i will work on the insides of my fenders and maybe try to paint those and see if they have any problems showing through. sucks because i really wanted it painted so i could something one off the list, but i guess its gonna have to wait!

Mulk · 08-08-2011, 05:25 PM

I know the feeling. I feel like I'm doing stuff, but getting nothing accomplished. So many little things about 75-80% completed, but I get bored or frustrated on something, and move to a different task, instead of finishing....

Maybe there's something to be said about that whole A.D.D. thing....

What was I talking about again?
Posted via Mobile Device

**kev2809** · 08-08-2011, 06:39 PM

i know exactly what you mean!

i started on the fenders today to get the insides primed and painted..then i started sanding the outside again lol..oh it never ends.

i figured i might as well sand down the outside of the fenders too and get the whole truck in the same brand epoxy (i used an omni brand the first time on the front clip)...and of course they need body work. so...is it really worth painting the insides now...? good thing i have the entire week off from work

**kev2809** · 08-08-2011, 09:08 PM

bad news..after sanding down my fenders..i think i might toss the passenger side fender.
this is the fender i did A LOT of work on, welding 2 seperate fenders to make and welded in a new lower cup. well, this was when i first started trying to weld..and use filler. it seems this thing may be warped beyond repair as i loaded filler on it and attempted to smooth it out and it was fine for then. im gonna sand down the entire area to knock off all the filler and see what i can do..maybe i can cut the front cup off and rear patch area and see if i can find a buyer and put that towards a different fender?

i would just rather not use this one but i guess we can see what happens...

texastrendz · 08-09-2011, 10:03 PM

dude,
drive down to outback truck parts and buy a repop fender. they are about a buck and a half. i know labor is free, but sometimes ya just gotta do it. lol

**kev2809** · 08-09-2011, 10:34 PM

lol...i know i know. im hoping i find a really really cheap original that someone could help me out with locally, but i guess well see.

i also might change the final color to white..since im doing my own body work. the interior, firewall, and inside fenders/under hood will still be black, if i go this route.

**kev2809** · 08-11-2011, 11:14 AM

been working on my fenders lately..heres a pic for motivation.

i just slapped the fenders on with the core support and grill.

i started with the driver fender which is my good one..sanded it down. also made some clearance for my wheels...they were sittiting practically on my tire..now i have about a 2" clearance. i have to keep my stock hinges..and also when the motor goes in it will drop it more. right now my arms are about 1 1/2" off the ground, so i will have an extra .5" of clearance if i did my math right. i used a tig rod to get the roundness of the curve so the edge wont be so sharp

**kev2809** · 08-11-2011, 11:19 AM

and heres the frankenfender im working with. shaved up the emblems holes yesterday, im actually proud of measurements i took when i first did the splice, some of the mounting holes are only off by about 1/8".

took off all of the filler, and im gonna actually try to hammer and dolly and splice some more to get it right, not just load it with filler!

texastrendz · 08-11-2011, 12:23 PM

If I remember correctly, the hinges are going to hit the tires. I had the same exact setup you had and they just kissed the tires. You may have to trim the hinges a little.

VA72C10 · 08-11-2011, 12:35 PM

Nice progress!

**kev2809** · 08-11-2011, 04:06 PM

Quote:

Originally Posted by texastrendz

If I remember correctly, the hinges are going to hit the tires. I had the same exact setup you had and they just kissed the tires. You may have to trim the hinges a little.

ya, your right. i havent trimmed the hinges just yet, i wanted to get both of the fenders trimmed back first. if i measure right, i will have to take about an inch out of them, just before the bottom bolt hole, and they should fit flush. im just hoping i measured everything right and they dont touch the tires. i really cant go any smaller, and im still thinking 22's in the future.

Quote:

Originally Posted by VA72C10

Nice progress!

thanks for dropping by!

im hoping to get on the passenger fender today, then probably start the body work on them...or at least get them in a couple coats of primer.

Mulk · 08-11-2011, 10:16 PM

Looks good man! I love home-garage builds. Always a greater feeling of accomplishment. Not always perfect, but thats not what it's about. It's about having fun, friends, building YOUR project, and learning along the way. I'd rather roll my Burb with a few flaws here and there, knowing I did it. Instead of driving something I paid someone else to do.

Awesome!
Posted via Mobile Device

bruin_d · 08-11-2011, 10:33 PM

Quote:

Originally Posted by Mulk

Looks good man! I love home-garage builds. Always a greater feeling of accomplishment. Not always perfect, but thats not what it's about. It's about having fun, friends, building YOUR project, and learning along the way. I'd rather roll my Burb with a few flaws here and there, knowing I did it. Instead of driving something I paid someone else to do.

Awesome!
Posted via Mobile Device

I COMPLETELY agree!

jbclassix · 08-11-2011, 11:19 PM

Burb's lookin great man!

bondo510 · 08-16-2011, 02:09 AM

You should get some evercoat G2 primer for your bondo spots.

1sik7t2 · 08-17-2011, 11:48 AM

looking good so far....if u go 22's, i think u'll have to move the hinges in from the fender...i run 20's and it hits...in fact, when i bought my burb, there were no hinges....i had to "tape" the hood shut..pretty ghetto i know...now it's forward tilt and problem solved

Quote:

Originally Posted by kev2809

ya, your right. i havent trimmed the hinges just yet, i wanted to get both of the fenders trimmed back first. if i measure right, i will have to take about an inch out of them, just before the bottom bolt hole, and they should fit flush. im just hoping i measured everything right and they dont touch the tires. i really cant go any smaller, and im still thinking 22's in the future.

thanks for dropping by!

im hoping to get on the passenger fender today, then probably start the body work on them...or at least get them in a couple coats of primer.

1sik7t2 · 08-18-2011, 03:21 PM

get that **** going son...another show in ontario the 27th....put on by severed ties...will b plenty of sik ass rides there....come on, i need another burb rollin

**kev2809** · 08-18-2011, 06:17 PM

lol...man i wish i could even try to make a show near me...much less cali!

still taking donations in my paypal...

bruin_d · 08-18-2011, 08:05 PM

Quote:

Originally Posted by 1sik7t2

get that **** going son...another show in ontario the 27th....put on by severed ties...will b plenty of sik ass rides there....come on, i need another burb rollin

I'll be there soon!!!!

1sik7t2 · 08-18-2011, 08:45 PM

BRUIN D.......do u know what part of town yet?

Slick67 · 08-18-2011, 09:55 PM

Kev! That looks sick! Guess you are going to beat me to the finish line!!! Any plans to have a second set of rims to swap out when you feel like changing the look??

**kev2809** · 09-10-2011, 06:41 PM

^^ actually yes..lol

heres the set i have in my shed, buddy of mine had them on a 2006 altima. they are 22x8.5, so im gonna need some adapters to make them fit.

not much progress really. good news is i did find a passenger fender finally. its aftermarket but oh well, tired of this holding me up. i sanded down the gallon of bondo they had around the reflector area. they did a horrible job shaving up the reflector hole, so i cut it back out and welded it up right, i just warped it a little lol. banged some out and shot it in primer. also sanded down the core support and grill and also got that sprayed. so the whole clip minus the hood is in epoxy waiting on the body work.

08-03-2011, 10:35 PM	#451
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,173	Re: Project 67 DRGNWGN - 67 Burban!! finally! first coat second coat (was dark outside, so the paint looks wetter and darker but its not) i think it came out pretty good, not show quality but im happy with it! the filler really shows through the primer, like it soaked it up or something... will start wetsanding either tomorrow night or friday night, then shoot the paint over the weekend __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

08-03-2011, 10:42 PM	#452
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Project 67 DRGNWGN - 67 Burban!! I am not a paint expert but should you consider sealer since the primer did that with the filler? It seals everything to prevent it from coming through in your final paint...maybe ask the question on the paint forum? __________________ Looking for a 67-72 swb or blazer project in or around VA.

08-03-2011, 11:10 PM	#453
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,173	Re: Project 67 DRGNWGN - 67 Burban!! good point..i believe this primer can be thinned for a sealer too. im not sure if i should though because the paint im using is valspar tractor paint (acrylic enamel) and it lays pretty thick. i plan on spraying 2 coats..but i think i will see if one of the paint guys chime in to make sure! __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

08-08-2011, 11:01 AM	#454
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,173	Re: Project 67 DRGNWGN - 67 Burban!! well..i will probably wait on the paint on this thing. i think i will work on the insides of my fenders and maybe try to paint those and see if they have any problems showing through. sucks because i really wanted it painted so i could something one off the list, but i guess its gonna have to wait! __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

08-08-2011, 05:25 PM	#455
Mulk Registered User Join Date: Mar 2010 Location: Sin City, Nevada Posts: 152	Re: Project 67 DRGNWGN - 67 Burban!! I know the feeling. I feel like I'm doing stuff, but getting nothing accomplished. So many little things about 75-80% completed, but I get bored or frustrated on something, and move to a different task, instead of finishing.... Maybe there's something to be said about that whole A.D.D. thing.... What was I talking about again? Posted via Mobile Device __________________ Eric '68 C20 Suburban, Bagged with Suicide 3rd Door, and Loaded with a 396 - Under Construction http://67-72chevytrucks.com/vboard/s...d.php?t=403690

08-08-2011, 06:39 PM	#456
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,173	Re: Project 67 DRGNWGN - 67 Burban!! i know exactly what you mean! i started on the fenders today to get the insides primed and painted..then i started sanding the outside again lol..oh it never ends. i figured i might as well sand down the outside of the fenders too and get the whole truck in the same brand epoxy (i used an omni brand the first time on the front clip)...and of course they need body work. so...is it really worth painting the insides now...? good thing i have the entire week off from work __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

08-08-2011, 09:08 PM	#457
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,173	Re: Project 67 DRGNWGN - 67 Burban!! bad news..after sanding down my fenders..i think i might toss the passenger side fender. this is the fender i did A LOT of work on, welding 2 seperate fenders to make and welded in a new lower cup. well, this was when i first started trying to weld..and use filler. it seems this thing may be warped beyond repair as i loaded filler on it and attempted to smooth it out and it was fine for then. im gonna sand down the entire area to knock off all the filler and see what i can do..maybe i can cut the front cup off and rear patch area and see if i can find a buyer and put that towards a different fender? i would just rather not use this one but i guess we can see what happens... __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

08-09-2011, 10:03 PM	#458
texastrendz Registered User Join Date: Jan 2008 Location: HOUSTON TX Posts: 1,161	Re: Project 67 DRGNWGN - 67 Burban!! dude, drive down to outback truck parts and buy a repop fender. they are about a buck and a half. i know labor is free, but sometimes ya just gotta do it. lol

08-09-2011, 10:34 PM	#459
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,173	Re: Project 67 DRGNWGN - 67 Burban!! lol...i know i know. im hoping i find a really really cheap original that someone could help me out with locally, but i guess well see. i also might change the final color to white..since im doing my own body work. the interior, firewall, and inside fenders/under hood will still be black, if i go this route. __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

08-11-2011, 11:14 AM	#460
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,173	Re: Project 67 DRGNWGN - 67 Burban!! been working on my fenders lately..heres a pic for motivation. i just slapped the fenders on with the core support and grill. i started with the driver fender which is my good one..sanded it down. also made some clearance for my wheels...they were sittiting practically on my tire..now i have about a 2" clearance. i have to keep my stock hinges..and also when the motor goes in it will drop it more. right now my arms are about 1 1/2" off the ground, so i will have an extra .5" of clearance if i did my math right. i used a tig rod to get the roundness of the curve so the edge wont be so sharp __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

08-11-2011, 11:19 AM	#461
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,173	Re: Project 67 DRGNWGN - 67 Burban!! and heres the frankenfender im working with. shaved up the emblems holes yesterday, im actually proud of measurements i took when i first did the splice, some of the mounting holes are only off by about 1/8". took off all of the filler, and im gonna actually try to hammer and dolly and splice some more to get it right, not just load it with filler! __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

08-11-2011, 12:23 PM	#462
texastrendz Registered User Join Date: Jan 2008 Location: HOUSTON TX Posts: 1,161	Re: Project 67 DRGNWGN - 67 Burban!! If I remember correctly, the hinges are going to hit the tires. I had the same exact setup you had and they just kissed the tires. You may have to trim the hinges a little.

08-11-2011, 12:35 PM	#463
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Project 67 DRGNWGN - 67 Burban!! Nice progress! __________________ Looking for a 67-72 swb or blazer project in or around VA.

08-11-2011, 10:16 PM	#465
Mulk Registered User Join Date: Mar 2010 Location: Sin City, Nevada Posts: 152	Re: Project 67 DRGNWGN - 67 Burban!! Looks good man! I love home-garage builds. Always a greater feeling of accomplishment. Not always perfect, but thats not what it's about. It's about having fun, friends, building YOUR project, and learning along the way. I'd rather roll my Burb with a few flaws here and there, knowing I did it. Instead of driving something I paid someone else to do. Awesome! Posted via Mobile Device __________________ Eric '68 C20 Suburban, Bagged with Suicide 3rd Door, and Loaded with a 396 - Under Construction http://67-72chevytrucks.com/vboard/s...d.php?t=403690

08-11-2011, 11:19 PM	#467
jbclassix Junk Yartist Join Date: Jul 2009 Location: Greeley, CO Posts: 2,203	Re: Project 67 DRGNWGN - 67 Burban!! Burb's lookin great man! __________________ -Jeremy YOU ONLY FAIL IF YOU STOP TRYING 70 Crew Cab Build Link 70 GMC Suburban 4X4 build thread 95 Yukon Daily Driver Rebuilding an NP205



Register or Log In To remove these advertisements.

08-16-2011, 02:09 AM	#468
bondo510 Registered User Join Date: Jun 2011 Location: Sonora CA Posts: 238	Re: Project 67 DRGNWGN - 67 Burban!! You should get some evercoat G2 primer for your bondo spots.

08-18-2011, 03:21 PM	#470
1sik7t2 dave Join Date: Jul 2007 Location: el cajon Posts: 558	Re: Project 67 DRGNWGN - 67 Burban!! get that **** going son...another show in ontario the 27th....put on by severed ties...will b plenty of sik ass rides there....come on, i need another burb rollin __________________ check out my build "DIRTY BURB"

08-18-2011, 06:17 PM	#471
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,173	Re: Project 67 DRGNWGN - 67 Burban!! lol...man i wish i could even try to make a show near me...much less cali! still taking donations in my paypal... __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_]

08-18-2011, 08:45 PM	#473
1sik7t2 dave Join Date: Jul 2007 Location: el cajon Posts: 558	Re: Project 67 DRGNWGN - 67 Burban!! BRUIN D.......do u know what part of town yet? __________________ check out my build "DIRTY BURB"

08-18-2011, 09:55 PM	#474
Slick67 Sofa King Crazy!! Join Date: Oct 2008 Location: Houston, TX Posts: 3,090	Re: Project 67 DRGNWGN - 67 Burban!! Kev! That looks sick! Guess you are going to beat me to the finish line!!! Any plans to have a second set of rims to swap out when you feel like changing the look?? __________________ You found the Tater. *My Blazer Build (New)* - http://67-72chevytrucks.com/vboard/s...d.php?t=654650 *My 67 Build* - http://67-72chevytrucks.com/vboard/s...d.php?t=335650 67 Chevy LWB big window a/c AKA TOTALLED BY A JACKASS. 1972 2wd Blazer "Porterbuilt and Sloshed"

09-10-2011, 06:41 PM	#475
kev2809 low n' slo Join Date: Mar 2009 Location: rosenberg, texas Posts: 5,173	Re: Project 67 DRGNWGN - 67 Burban!! ^^ actually yes..lol heres the set i have in my shed, buddy of mine had them on a 2006 altima. they are 22x8.5, so im gonna need some adapters to make them fit. not much progress really. good news is i did find a passenger fender finally. its aftermarket but oh well, tired of this holding me up. i sanded down the gallon of bondo they had around the reflector area. they did a horrible job shaving up the reflector hole, so i cut it back out and welded it up right, i just warped it a little lol. banged some out and shot it in primer. also sanded down the core support and grill and also got that sprayed. so the whole clip minus the hood is in epoxy waiting on the body work. __________________ 67 1/2 ton Suburban - Project DRGNWGN. Build thread -_--_--_ _________ _--_-_ -/____\|__\|__\__ ,.,,,.,.,,.,\|_O _______ O_] Last edited by kev2809; 09-10-2011 at 06:49 PM.

Register or Log In To remove these advertisements.