How To: Ruin a Perfectly Good K/5 - Page 19 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

gringoloco · 10-08-2016, 10:48 AM

Quote:

Originally Posted by 72 paul

Good idea with the garden sprayer, I'm getting ready to squirt inside mine.Dont see the tension rod in that box, maybe just pic angle. Nice ruinin.

Thanks! Funny, I hadn't noticed that. They're definitely in there--makes it a pain to wire brush and shop-vac in there. She's not ruined, yet

Maybe I should rename this thread "How to: Ruin a Perfectly Good Garage Floor"

Quote:

Originally Posted by DeadheadNM

Great job! I'm lovin' the updates.

Thanks a lot! I'll keep em comin'. Big push this weekend--we'll see how far I get

gringoloco · 10-08-2016, 04:59 PM

Worked the first door--rust on both sides in the usual spot. Had to peel back the skin to find clean metal. Thankfully, the bottom is otherwise solid.

gringoloco · 10-08-2016, 05:05 PM

Other side is better, but still needs a little love. Seems the trim was trapping water...

SCOTI · 10-08-2016, 06:47 PM

Great work here. The intent still to just spot repair/paint?

NTR72GMC · 10-08-2016, 11:36 PM

Looking good! See your in the Utah area now. Hope to see this thing in person one of these days.

gringoloco · 10-09-2016, 12:53 AM

Quote:

Originally Posted by NTR72GMC

Looking good! See your in the Utah area now. Hope to see this thing in person one of these days.

Thanks! Maybe I won't be embarrassed to drive it with the rust fixed

Progress: I POR-ed the inside of the doors (not pic worthy) and the rocker box end caps (didn't get a pic), but I did get a picture of some shiny blue paint

Couldn't help myself. The bed was very near ready, so I sanded, primed, prepped, masked, and laid some color. The match seems to be very good, though daylight will tell the true story.

gringoloco · 10-09-2016, 01:25 PM

More color:

gringoloco · 10-09-2016, 05:41 PM

...and some more:

**lolife99** · 10-09-2016, 06:11 PM

Excellent work!

gringoloco · 10-09-2016, 07:12 PM

Quote:

Originally Posted by lolife99

Excellent work!

Thanks! Ready to be done! Other side and working the doors:

**DeadheadNM** · 10-09-2016, 08:37 PM

Dumb question - single stage paint?

gringoloco · 10-09-2016, 09:06 PM

Quote:

Originally Posted by DeadheadNM

Dumb question - single stage paint?

Acrylic enamel. Far from optimal, but if it was perfect, the rest of the truck would look bad...

gringoloco · 10-10-2016, 12:53 AM

Finished up the doors and started bolting things back on

ochre 72 · 10-10-2016, 07:33 AM

That looks great. Really nice work!

jaros44sr · 10-10-2016, 08:26 AM

Can't believe dealers would drill holes in your new truck back in the day, at least now they just use a license plate surround

nice work on the spot fixes blends well

how was the fresh air box, much crap in there?

kehstr · 10-10-2016, 08:34 AM

Where did you get the patch panels? from what I can see everything seemed to fit really well.

Bennett68C10 · 10-10-2016, 08:40 AM

Man you knocked it out of the park and made all those rust repairs look too easy

68Timber · 10-10-2016, 09:39 AM

Sweeet!

aggie91 · 10-10-2016, 10:57 AM

Paint looks great. Nice work!

mcbassin · 10-10-2016, 11:25 AM

Very nice work on the rust repair Chris! You make this stuff look way too easy.

gringoloco · 10-10-2016, 01:00 PM

Quote:

Originally Posted by ochre 72

That looks great. Really nice work!

Thanks! I'm stoked!

Quote:

Originally Posted by jaros44sr

Can't believe dealers would drill holes in your new truck back in the day, at least now they just use a license plate surround

nice work on the spot fixes blends well

how was the fresh air box, much crap in there?

Thanks! I kinda like the fender tag. Wish I had a match on the other side--the lack of symmetry messes with my OCD

There's a nice one on the gate, too:

Boxes are clean and solid. I did have one mouse best in the cowl (and one in the driver rocker box) that was from recent storage in my folks' barn.

Quote:

Originally Posted by kehstr

Where did you get the patch panels? from what I can see everything seemed to fit really well.

Everything came from GMCPauls (drop shipped from triplus). Nice, heavy metal, unlike the floor supports I bought from summit. What is not pictured here is the amount of manipulation required to get a good fit

Quote:

Originally Posted by Bennett68C10

Man you knocked it out of the park and made all those rust repairs look too easy

Anyone who has done this knows better, thanks!

Quote:

Originally Posted by 68Timber

Sweeet!

Thank you!

Quote:

Originally Posted by aggie91

Paint looks great. Nice work!

It's turning out decent, thanks!

Quote:

Originally Posted by mcbassin

Very nice work on the rust repair Chris! You make this stuff look way too easy.

Thanks! Glad it looks easy, haha!

Interior is all in; time to hang doors...

gringoloco · 10-10-2016, 03:46 PM

Looking more and more like herself

kehstr · 10-10-2016, 10:25 PM

Quote:

Originally Posted by gringoloco

Everything came from GMCPauls (drop shipped from triplus). Nice, heavy metal, unlike the floor supports I bought from summit. What is not pictured here is the amount of manipulation required to get a good fit

Did everything require a bunch of work to fit right?

gringoloco · 10-10-2016, 10:54 PM

Quote:

Originally Posted by kehstr

Did everything require a bunch of work to fit right?

Nothing was a "bolt-on". Some parts were better than others. Just a lot of cutting, bending, shaping, hammering, tweaking to get it all lined up and looking good. I'm a little particular about things sometimes

Lower fenders/quarters were a remote resemblance if the stock shapes. Rear bed floor piece was nice--better than gm in some ways. Rockers were pretty good, but needed some slicing here and there for a good fit. Driver was a better shape than passenger. Still some minor alignment issues at the rocker/quarter. Kick panel fit well. In review of others work, these are pretty common issues. Just thankful to have parts available and not have to create them from scratch.

mcbassin · 10-10-2016, 04:10 PM

10-08-2016, 04:59 PM	#2
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,920	Re: How To: Ruin a Perfectly Good K/5 Worked the first door--rust on both sides in the usual spot. Had to peel back the skin to find clean metal. Thankfully, the bottom is otherwise solid. Attached Images __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

10-08-2016, 05:05 PM	#3
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,920	Re: How To: Ruin a Perfectly Good K/5 Other side is better, but still needs a little love. Seems the trim was trapping water... Attached Images __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

10-08-2016, 06:47 PM	#4
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 21,939	Re: How To: Ruin a Perfectly Good K/5 Great work here. The intent still to just spot repair/paint? __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

10-08-2016, 11:36 PM	#5
NTR72GMC 2wd FTW!!!! Join Date: Jan 2007 Location: SLC UTAH Posts: 673	Re: How To: Ruin a Perfectly Good K/5 Looking good! See your in the Utah area now. Hope to see this thing in person one of these days.

10-09-2016, 01:25 PM	#7
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,920	Re: How To: Ruin a Perfectly Good K/5 More color: Attached Images __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

10-09-2016, 05:41 PM	#8
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,920	Re: How To: Ruin a Perfectly Good K/5 ...and some more: Attached Images __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

10-09-2016, 06:11 PM	#9
lolife99 67-72 parts collector,… Join Date: Nov 2002 Location: Mid-MO Posts: 22,690	Re: How To: Ruin a Perfectly Good K/5 Excellent work! __________________ Keith Convert to disc brakes. http://67-72chevytrucks.com/vboard/s...d.php?t=444823

10-09-2016, 08:37 PM	#11
DeadheadNM Carpe manana Join Date: Dec 2010 Location: Eau Claire, WI Posts: 12,348	Re: How To: Ruin a Perfectly Good K/5 Dumb question - single stage paint? __________________ 1972 K5 CST Highlander Blazer: http://67-72chevytrucks.com/vboard/s...d.php?t=708547 1972 K20 Cheyenne Super: http://67-72chevytrucks.com/vboard/s...d.php?t=528308 Members met: ORANGBLAZ, 2003 silverado, MikeCofield, BB72CHEVKT, Duncan&Son, Sameyrasmea72, THENEWMEXICAN, HotRod C/10, brianthelion02, Sport/Truck, ryanroo, michael bustamante, Dirt's72, Already Gone, WestButteTruck, 57taskforce, Moreyel, painterljp, AASmedic, SoCoC10, Lumaestas, carbuff382, Chevyland

10-10-2016, 12:53 AM	#13
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,920	Re: How To: Ruin a Perfectly Good K/5 Finished up the doors and started bolting things back on Attached Images __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

10-10-2016, 07:33 AM	#14
ochre 72 Registered User Join Date: Feb 2016 Location: Woodstock, Ga. Posts: 183	Re: How To: Ruin a Perfectly Good K/5 That looks great. Really nice work!

10-10-2016, 08:26 AM	#15
jaros44sr Registered User Join Date: May 2006 Location: Philadelphia, Pa. 19454 Posts: 9,456	Re: How To: Ruin a Perfectly Good K/5 Can't believe dealers would drill holes in your new truck back in the day, at least now they just use a license plate surround nice work on the spot fixes blends well how was the fresh air box, much crap in there? __________________ Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim

10-10-2016, 08:34 AM	#16
kehstr Registered User Join Date: Mar 2015 Location: Utah Posts: 750	Re: How To: Ruin a Perfectly Good K/5 Where did you get the patch panels? from what I can see everything seemed to fit really well. __________________ 72 GMC highlander nicknamed by my then 6-year-old brother "stripes" http://67-72chevytrucks.com/vboard/s....php?p=7378180 Check out my Youtube channel @Chad's Fab

10-10-2016, 08:40 AM	#17
Bennett68C10 Registered User Join Date: Dec 2006 Location: Toms River, NJ Posts: 5,518	Re: How To: Ruin a Perfectly Good K/5 Man you knocked it out of the park and made all those rust repairs look too easy __________________ Keith 66 Suburban Burb Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=751361 IG: bennett68c10

10-10-2016, 09:39 AM	#18
68Timber I know the pieces fit Join Date: Nov 2007 Location: MONTGOMERY, AL Posts: 5,523	Re: How To: Ruin a Perfectly Good K/5 Sweeet! __________________ John 79 2wd Blazer (Bruiser) 85 M1009 Blazer (Sarge) build 74 Honda Z50 build

10-10-2016, 10:57 AM	#19
aggie91 I'm just glad to be here! Join Date: Jan 2008 Location: Longview, TX Posts: 4,788	Re: How To: Ruin a Perfectly Good K/5 Paint looks great. Nice work! __________________ Karl 1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues) http://67-72chevytrucks.com/vboard/s...d.php?t=372424 The LST Challenge: http://67-72chevytrucks.com/vboard/s...=1#post7812257 Korbin's 1st Square: "Sunburn" http://67-72chevytrucks.com/vboard/s...d.php?t=418618 1985 GMC Sierra: "White Trash", Korbin's 2nd now... http://67-72chevytrucks.com/vboard/s...d.php?t=632305 Henry - 1984 Chevrolet, Owen's 1st Square



Register or Log In To remove these advertisements.

10-10-2016, 11:25 AM	#20
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: How To: Ruin a Perfectly Good K/5 Very nice work on the rust repair Chris! You make this stuff look way too easy. __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

10-10-2016, 03:46 PM	#22
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,920	Re: How To: Ruin a Perfectly Good K/5 Looking more and more like herself Attached Images __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

10-10-2016, 04:10 PM	#25
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: How To: Ruin a Perfectly Good K/5 __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

Register or Log In To remove these advertisements.