project INCREDIBLE HULK 6.2L with 6L80E - Page 19 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

68 short step · 11-04-2009, 11:10 PM

got the missing rod ends for the PB TAs, and installed everything...which leads to a problem, the "killer2" logo i made to go across the bridge, hits the rear end when aired out...so it'll have to be cut out and moved up about 1"..

VA72C10 · 11-04-2009, 11:21 PM

Chassis is looking sweet.

72 SHORTBED 7.0 · 11-05-2009, 10:44 AM

That's looks good how low,,

How much is that set up ..... for the rear

oldblue1968chevy · 11-06-2009, 11:19 PM

great work you are amazing

steemin_ehman · 11-09-2009, 11:18 AM

i LOVE the build! keep up the good work!

68 short step · 11-16-2009, 11:29 PM

welp after installing the PB rear suspension, the added drop put the rear end at a crazy bad angle...so the rear end was pulled out, mounting pads cut off, set proper pinion angle at ride height, and weld them back on.... also the shocks bottomed out before the bags were fully compressed (also do to the added drop of the PB arms)... so the old shock mounts were removed, new ones made, and installed on the bridge....now with the taken care of, since the 6L80E is so big and the new PB setup, we're gonna have to tunnel the cab (all this will be hidden under the center console), and make the hoop bigger on the PB crossmember.. ill get pics of that when the time comes...

VA72C10 · 11-17-2009, 12:40 AM

Nice work, I hate doing things twice but when you're going custom it happens sometimes...especially when you step up to the newest and best components...going to be an awesome truck!

72 SHORTBED 7.0 · 11-17-2009, 09:45 AM

You do nice work D.. that's good you check all that stuff some folks just set it up and that's that ....

**N2TRUX** · 11-17-2009, 11:51 AM

You are doing an awesome job on the build. Have you considered having the Nathan cut the logo in the bridge plate too.

I don't see what you have done being on the same quality level as the rest of your build.

67chevemall · 11-17-2009, 02:56 PM

WOW Off the hizzhook! Can't wait to see it done.

dieselarmy13 · 11-17-2009, 03:59 PM

Quick question pertaining to the rear setup- At full dump, how far is the frame off the ground?

Great looking build. I've been sitting on the sidelines watching this for quite some time now. You do amazing work.

lowdownstar · 11-17-2009, 09:57 PM

Thanks so much for letting me see your work! It has helped me out a great deal.

Thanks Ray

68 short step · 11-26-2009, 01:27 AM

got some brakes in.... they are massive, 14.5" rotors all round, 4 piston polished alumnium brembo style calipers, and braided brake lines....also got another electric style master cyliner/power booster....
the calipers are 12" long and nearly 7" wide, and they look BIG, as well as the ROTORS themselves....everything installed with no problems, except the rears....the rear caliper mounting bracket mounting holes were off by
.25"....im gonna call the company (abspowerbrake.com) and let them know, so they'll send me the correct brackets...but here is how big they are, and them mounted on the truck with 22s and 20s

68 short step · 11-26-2009, 01:29 AM

hgs_notes · 11-26-2009, 10:16 AM

Just a little bigger and you wouldn't need the wheels and tires.

**FRENCHBLUE72** · 11-26-2009, 12:03 PM

Those are massive.....

babyblueoval · 11-26-2009, 01:03 PM

So in a full power emergency stop, how will you ever be able to stop?

68 short step · 11-26-2009, 01:19 PM

Quote:

Originally Posted by babyblueoval

So in a full power emergency stop, how will you ever be able to stop?

im gonna wire in the air system to the brake switch... so incase of an emergency full on stop, the bags will deflate and just grindddd the front bumper to a stop (hopefully)

babyblueoval · 11-26-2009, 01:30 PM

SWEET!!!!
I'll have to go with a shorter tire for that one to work for me.

I'm using the itsy bitsy 13" Corvette front brakes and Camaro 12" rears.
Rotor envy.............

I feel totally inadequite now.

I'm waiting for XXL to chime in with a totally inappropriate picture for this.

my67chevytruck · 11-26-2009, 01:34 PM

looking good Don!

VA72C10 · 11-26-2009, 05:57 PM

You got everyone all excited with the big rotors and now you exceeded your bandwidth and I can't see them

68 short step · 11-26-2009, 06:07 PM

ya, photobucket started a new thing, they now want everyone to join their 'pro' account...and if you dont they punish you by doing this....dont worry the pics will be back in a couple of days..

*vegaschevy* · 11-26-2009, 06:37 PM

Quote:

Originally Posted by 68 short step

ya, photobucket started a new thing, they now want everyone to join their 'pro' account...and if you dont they punish you by doing this....dont worry the pics will be back in a couple of days..

they have always done it. you just got to many views in your thread.

VA72C10 · 11-26-2009, 06:25 PM

yeah, I went ahead and upgraded because I have a TON of pics saved of my truck and remodeling pictures and was reaching the free limit and didn't want to deal with multiple free accounts to get around it so I just payed the "man" to get my pictures back

68 short step · 11-26-2009, 06:56 PM

i may just have to pay the 'man'...seams like nothing is really 'free' these days...so effextive now, if you view this page, it'll be 1$

11-04-2009, 11:10 PM	#1
68 short step Senior Member Join Date: Aug 2005 Location: tulsa OK Posts: 3,070	Re: project INCREDIBLE HULK 6.2L with 6L80E got the missing rod ends for the PB TAs, and installed everything...which leads to a problem, the "killer2" logo i made to go across the bridge, hits the rear end when aired out...so it'll have to be cut out and moved up about 1"..

11-04-2009, 11:21 PM	#2
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: project INCREDIBLE HULK 6.2L with 6L80E Chassis is looking sweet. __________________ Looking for a 67-72 swb or blazer project in or around VA.

11-05-2009, 10:44 AM	#3
72 SHORTBED 7.0 Registered User Join Date: Nov 2007 Location: dallas Tx in front of you Posts: 182	Re: project INCREDIBLE HULK 6.2L with 6L80E That's looks good how low,, How much is that set up ..... for the rear

11-06-2009, 11:19 PM	#4
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: project INCREDIBLE HULK 6.2L with 6L80E great work you are amazing __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

11-09-2009, 11:18 AM	#5
steemin_ehman False Lies Join Date: Feb 2006 Location: Esterhazy, SK Posts: 305	Re: project INCREDIBLE HULK 6.2L with 6L80E i LOVE the build! keep up the good work! __________________ Kyle (Steemin) Ehman -1979 Chevy CCLB, 6.7L Cummins swap - Project "RAMERADO" -2015 Yukon XL Denali (Family ride) -1977 Chevy stepside, carb'ed vortec 350 (SOLD) -Father of three daughters who will also have something cool...

11-16-2009, 11:29 PM	#6
68 short step Senior Member Join Date: Aug 2005 Location: tulsa OK Posts: 3,070	Re: project INCREDIBLE HULK 6.2L with 6L80E welp after installing the PB rear suspension, the added drop put the rear end at a crazy bad angle...so the rear end was pulled out, mounting pads cut off, set proper pinion angle at ride height, and weld them back on.... also the shocks bottomed out before the bags were fully compressed (also do to the added drop of the PB arms)... so the old shock mounts were removed, new ones made, and installed on the bridge....now with the taken care of, since the 6L80E is so big and the new PB setup, we're gonna have to tunnel the cab (all this will be hidden under the center console), and make the hoop bigger on the PB crossmember.. ill get pics of that when the time comes...

11-17-2009, 12:40 AM	#7
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: project INCREDIBLE HULK 6.2L with 6L80E Nice work, I hate doing things twice but when you're going custom it happens sometimes...especially when you step up to the newest and best components...going to be an awesome truck! __________________ Looking for a 67-72 swb or blazer project in or around VA.

11-17-2009, 09:45 AM	#8
72 SHORTBED 7.0 Registered User Join Date: Nov 2007 Location: dallas Tx in front of you Posts: 182	Re: project INCREDIBLE HULK 6.2L with 6L80E You do nice work D.. that's good you check all that stuff some folks just set it up and that's that ....

11-17-2009, 11:51 AM	#9
N2TRUX Happy to be here Join Date: Mar 2000 Location: Cypress, TX Posts: 39,023	Re: project INCREDIBLE HULK 6.2L with 6L80E You are doing an awesome job on the build. Have you considered having the Nathan cut the logo in the bridge plate too. I don't see what you have done being on the same quality level as the rest of your build. __________________ Follow me on Facebook and Instagram @N2trux.com Articles- "Jake" the 84 to 74 crewcab "Elwood" the77_Remix 85 GMC Sierra "Scarlett" "Refining Sierra"

11-17-2009, 02:56 PM	#10
67chevemall Registered User Join Date: Apr 2003 Location: NB Posts: 3,367	Re: project INCREDIBLE HULK 6.2L with 6L80E WOW Off the hizzhook! Can't wait to see it done. __________________ 1968 Chevy C10 307 3ott fleetside 1967 Chevy C/10 V8, 3spd, fleetside lwb.Sold 1967 Chev C/10 step, 383, M21. SOLD

11-17-2009, 03:59 PM	#11
dieselarmy13 Phone's ringin Dude. Join Date: Mar 2007 Location: Colorado Springs Posts: 1,426	Re: project INCREDIBLE HULK 6.2L with 6L80E Quick question pertaining to the rear setup- At full dump, how far is the frame off the ground? Great looking build. I've been sitting on the sidelines watching this for quite some time now. You do amazing work. __________________ I pitty the fool with only two headlights!! 2003 SILVERADO SS--THE NEW GIRL 1972 GMC--THE OLD GIRL

11-17-2009, 09:57 PM	#12
lowdownstar big guy Join Date: Jun 2008 Location: mass Posts: 820	Re: project INCREDIBLE HULK 6.2L with 6L80E Thanks so much for letting me see your work! It has helped me out a great deal. Thanks Ray

11-26-2009, 01:27 AM	#13
68 short step Senior Member Join Date: Aug 2005 Location: tulsa OK Posts: 3,070	Re: project INCREDIBLE HULK 6.2L with 6L80E got some brakes in.... they are massive, 14.5" rotors all round, 4 piston polished alumnium brembo style calipers, and braided brake lines....also got another electric style master cyliner/power booster.... the calipers are 12" long and nearly 7" wide, and they look BIG, as well as the ROTORS themselves....everything installed with no problems, except the rears....the rear caliper mounting bracket mounting holes were off by .25"....im gonna call the company (abspowerbrake.com) and let them know, so they'll send me the correct brackets...but here is how big they are, and them mounted on the truck with 22s and 20s Last edited by 68 short step; 11-26-2009 at 01:30 AM.

11-26-2009, 01:29 AM	#14
68 short step Senior Member Join Date: Aug 2005 Location: tulsa OK Posts: 3,070	Re: project INCREDIBLE HULK 6.2L with 6L80E Last edited by 68 short step; 11-26-2009 at 01:42 AM.

11-26-2009, 10:16 AM	#15
hgs_notes GEARHEAD Join Date: Aug 2003 Location: MN Posts: 6,122	Re: project INCREDIBLE HULK 6.2L with 6L80E Just a little bigger and you wouldn't need the wheels and tires. __________________ If no one knows what you're doing, they can't tell you you're doing it wrong HG's Dream Car Build - Shelby Cobra Kit Build your own adjustable track bar 71 Long Fleet C/10 72 Jimmy 4x4 (Junkyard Jimmy) HG's Plow Truck '78 K35 Dually Bigass Farm Truck HG's thread of miscellaneous stuff



Register or Log In To remove these advertisements.

11-26-2009, 12:03 PM	#16
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,604	Re: project INCREDIBLE HULK 6.2L with 6L80E Those are massive..... __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

11-26-2009, 01:03 PM	#17
babyblueoval Registered User Join Date: Apr 2006 Location: Arkansas Posts: 835	Re: project INCREDIBLE HULK 6.2L with 6L80E So in a full power emergency stop, how will you ever be able to stop? __________________ Jim '71 Blazer-Porterbuilt Dropmember C4/LS1/6L80E '57 VW beetle - Oct. 2006 Hot VW's pg. 87 - 350hp intercooled, turbocharged, EFI 2.3liter and 5spd in the works '87 BMW 325i - daily driver

11-26-2009, 01:30 PM	#19
babyblueoval Registered User Join Date: Apr 2006 Location: Arkansas Posts: 835	Re: project INCREDIBLE HULK 6.2L with 6L80E SWEET!!!! I'll have to go with a shorter tire for that one to work for me. I'm using the itsy bitsy 13" Corvette front brakes and Camaro 12" rears. Rotor envy............. I feel totally inadequite now. I'm waiting for XXL to chime in with a totally inappropriate picture for this. __________________ Jim '71 Blazer-Porterbuilt Dropmember C4/LS1/6L80E '57 VW beetle - Oct. 2006 Hot VW's pg. 87 - 350hp intercooled, turbocharged, EFI 2.3liter and 5spd in the works '87 BMW 325i - daily driver

11-26-2009, 01:34 PM	#20
my67chevytruck Under Construction Join Date: Oct 2007 Location: Midlothian,TX (DFW) Posts: 4,555	Re: project INCREDIBLE HULK 6.2L with 6L80E looking good Don! __________________ Heath subscribe to the board here: http://67-72chevytrucks.com/vboard/payments.php http://67-72chevytrucks.com/vboard/s...d.php?t=157669 FAQ how to's 1956 Chevy Apache 1967 C10 SWB FleetSide (under construction) 1969 K10 SWB FleetSide (Future Build) 1972 C10 SWB Stepside (Future Build) 56 chevy truck : http://www.cardomain.com/ride/2955823/1 67 truck build: http://www.67-72chevytrucks.com/vboard/showthread.php?t=281357/1 69 k10: http://67-72chevytrucks.com/vboard/s...d.php?t=389470

11-26-2009, 05:57 PM	#21
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: project INCREDIBLE HULK 6.2L with 6L80E You got everyone all excited with the big rotors and now you exceeded your bandwidth and I can't see them __________________ Looking for a 67-72 swb or blazer project in or around VA.

11-26-2009, 06:07 PM	#22
68 short step Senior Member Join Date: Aug 2005 Location: tulsa OK Posts: 3,070	Re: project INCREDIBLE HULK 6.2L with 6L80E ya, photobucket started a new thing, they now want everyone to join their 'pro' account...and if you dont they punish you by doing this....dont worry the pics will be back in a couple of days.. Last edited by 68 short step; 11-26-2009 at 06:08 PM.

11-26-2009, 06:25 PM	#24
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: project INCREDIBLE HULK 6.2L with 6L80E yeah, I went ahead and upgraded because I have a TON of pics saved of my truck and remodeling pictures and was reaching the free limit and didn't want to deal with multiple free accounts to get around it so I just payed the "man" to get my pictures back __________________ Looking for a 67-72 swb or blazer project in or around VA.

11-26-2009, 06:56 PM	#25
68 short step Senior Member Join Date: Aug 2005 Location: tulsa OK Posts: 3,070	Re: project INCREDIBLE HULK 6.2L with 6L80E i may just have to pay the 'man'...seams like nothing is really 'free' these days...so effextive now, if you view this page, it'll be 1$

Register or Log In To remove these advertisements.