New 64 Stepper Project - Page 19 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**The Rocknrod** · 05-08-2021, 02:10 PM

They broke the first one, second one scratched it...

**The Rocknrod** · 05-27-2021, 10:29 AM

Took it to the upholstery shop in Waco to get the carpet, back wall and kick panels done.
Been waiting on wheels for two months.

**The Rocknrod** · 05-29-2021, 09:23 AM

Got the truck home, looks okay. Re-adjusting the throttle cable length now. Then I'll put in the seat.
Drivers door won't close all the way due to the press on door seals, may have to grease it up in a couple places and play with it to see if I can get it to sit right.

**The Rocknrod** · 05-29-2021, 01:02 PM

Put the seat in.

roll_the_dice · 05-29-2021, 02:38 PM

Looks great...well done!

**Joe Pass** · 05-29-2021, 04:32 PM

Very very nice

**The Rocknrod** · 05-29-2021, 05:34 PM

Thanks guys.

I ordered the Honda weatherstrip or door seal stuff today.

**The Rocknrod** · 06-08-2021, 04:00 PM

Got the floor mats in, they're okay.

LostMy65 · 06-08-2021, 05:00 PM

Quote:

Originally Posted by The Rocknrod

Got the floor mats in, they're okay.

Um....
https://youtu.be/yqsLPW7Xi-w

**The Rocknrod** · 06-08-2021, 05:12 PM

Um, they're okay.

88Stanger · 06-09-2021, 09:43 AM

DAMN DAMN DAMN, that is a fine job!!! Awesome looking truck!!

**The Rocknrod** · 06-09-2021, 11:49 AM

Quote:

Originally Posted by 88Stanger

DAMN DAMN DAMN, that is a fine job!!! Awesome looking truck!!

Thanks man.

**The Rocknrod** · 06-21-2021, 09:16 AM

So I took it out for a local drive yesterday, drove it to a friends house up and down some hills until I had a "Grapes of Wrath" moment. My left front tire blew at the next door neighbors house. I got the tires and wheels at a junk yard when I started all this years ago. Hobbled home no damage.
On a positive note the truck never got very warm at all. With the temps I thought it might but it stayed way low on the temp gauge the whole time.

SCOTI · 06-21-2021, 09:51 AM

'Goodole Maypops'..... I think everyone has used that brand @ some point in their life.
Time for new rubber.

**The Rocknrod** · 06-21-2021, 10:07 AM

Quote:

Originally Posted by SCOTI

'Goodole Maypops'..... I think everyone has used that brand @ some point in their life.
Time for new rubber.

Ya I'm praying for my wheels to come in before I buy new tires. The neighbor is letting me use a tire and rim he has left over until mine come in.

**Joe Pass** · 06-21-2021, 10:58 AM

congrats.....fresh set of tires and wheels and your ready to hit the road

**The Rocknrod** · 06-21-2021, 11:06 AM

Quote:

Originally Posted by Joe Pass

congrats.....fresh set of tires and wheels and your ready to hit the road

Thanks Joe - Two more weeks so they tell me.
I put the borrowed tire/rim on, it's a 26.9" diameter tire. The other was a 28" (235-75/15).
Was thinking of going with 27's in the front (16 inch wheels front, 17's rear) but now I'm not so sure about the 27".

joesscamaro · 06-22-2021, 08:37 AM

I agree with you. I think you could use a little larger tire in there and it would fill out the wheel well a little better. Truck is looking sharp!

aggie91 · 06-22-2021, 11:02 AM

Congrats on the first drive! Nice to know that your work is paying off. Glad there was no damage from the blow out...

SCOTI · 06-22-2021, 01:30 PM

What wheels did you decide to go with?

**The Rocknrod** · 06-22-2021, 01:47 PM

Chrome American five spoke.

**The Rocknrod** · 06-25-2021, 02:13 PM

Just got off the phone with Fozzies Wheels, the Chrome American five spokes should be shipped starting (hopefully) Saturday. One box from LA and another from Ohio I think.

SCOTI · 06-25-2021, 02:34 PM

Anticipation.....

88Stanger · 06-26-2021, 12:16 PM

and the excitement builds.....

**The Rocknrod** · 06-26-2021, 03:13 PM

Quote:

Originally Posted by SCOTI

Anticipation.....

Quote:

Originally Posted by 88Stanger

and the excitement builds.....

I know, they sent me the two tracking numbers and I keep checking. Nothing yet. My old grandma used to say, A watched Pot...

05-08-2021, 02:10 PM	#1
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project They broke the first one, second one scratched it... __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

05-27-2021, 10:29 AM	#2
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project Took it to the upholstery shop in Waco to get the carpet, back wall and kick panels done. Been waiting on wheels for two months. Attached Images __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

05-29-2021, 09:23 AM	#3
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project Got the truck home, looks okay. Re-adjusting the throttle cable length now. Then I'll put in the seat. Drivers door won't close all the way due to the press on door seals, may have to grease it up in a couple places and play with it to see if I can get it to sit right. Attached Images __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

05-29-2021, 01:02 PM	#4
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project Put the seat in. Attached Images __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

05-29-2021, 02:38 PM	#5
roll_the_dice Registered User Join Date: Mar 2016 Location: Manlius, NY Posts: 1,698	Re: New 64 Stepper Project Looks great...well done! __________________ 1965 C10 LWB Stepside 1964 GMC 1 Ton Dually Instagram #notaratrodnotashowtruck

05-29-2021, 04:32 PM	#6
Joe Pass Senior Member Join Date: Aug 2013 Location: Windsor, California Posts: 1,042	Re: New 64 Stepper Project Very very nice __________________ 1962 build album http://67-72chevytrucks.com/vboard/a...p?albumid=2066 http://67-72chevytrucks.com/vboard/a...p?albumid=2066 http://67-72chevytrucks.com/vboard/a...p?albumid=2067 1956 http://67-72chevytrucks.com/vboard/a...p?albumid=2086

05-29-2021, 05:34 PM	#7
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project Thanks guys. I ordered the Honda weatherstrip or door seal stuff today. __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

06-08-2021, 04:00 PM	#8
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project Got the floor mats in, they're okay. Attached Images __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

06-08-2021, 05:12 PM	#10
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project Um, they're okay. __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

06-09-2021, 09:43 AM	#11
88Stanger Registered User Join Date: Mar 2015 Location: Washington State Posts: 1,651	Re: New 64 Stepper Project DAMN DAMN DAMN, that is a fine job!!! Awesome looking truck!! __________________ John 3:16 - Saved me... God Bless

06-21-2021, 09:16 AM	#13
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project So I took it out for a local drive yesterday, drove it to a friends house up and down some hills until I had a "Grapes of Wrath" moment. My left front tire blew at the next door neighbors house. I got the tires and wheels at a junk yard when I started all this years ago. Hobbled home no damage. On a positive note the truck never got very warm at all. With the temps I thought it might but it stayed way low on the temp gauge the whole time. Attached Images __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

06-21-2021, 09:51 AM	#14
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,027	Re: New 64 Stepper Project 'Goodole Maypops'..... I think everyone has used that brand @ some point in their life. Time for new rubber. __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

06-21-2021, 10:58 AM	#16
Joe Pass Senior Member Join Date: Aug 2013 Location: Windsor, California Posts: 1,042	Re: New 64 Stepper Project congrats.....fresh set of tires and wheels and your ready to hit the road __________________ 1962 build album http://67-72chevytrucks.com/vboard/a...p?albumid=2066 http://67-72chevytrucks.com/vboard/a...p?albumid=2066 http://67-72chevytrucks.com/vboard/a...p?albumid=2067 1956 http://67-72chevytrucks.com/vboard/a...p?albumid=2086

06-22-2021, 08:37 AM	#18
joesscamaro Registered User Join Date: Sep 2008 Location: Newport, North Carolina Posts: 638	Re: New 64 Stepper Project I agree with you. I think you could use a little larger tire in there and it would fill out the wheel well a little better. Truck is looking sharp!

06-22-2021, 11:02 AM	#19
aggie91 I'm just glad to be here! Join Date: Jan 2008 Location: Longview, TX Posts: 4,788	Re: New 64 Stepper Project Congrats on the first drive! Nice to know that your work is paying off. Glad there was no damage from the blow out... __________________ Karl 1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues) http://67-72chevytrucks.com/vboard/s...d.php?t=372424 The LST Challenge: http://67-72chevytrucks.com/vboard/s...=1#post7812257 Korbin's 1st Square: "Sunburn" http://67-72chevytrucks.com/vboard/s...d.php?t=418618 1985 GMC Sierra: "White Trash", Korbin's 2nd now... http://67-72chevytrucks.com/vboard/s...d.php?t=632305 Henry - 1984 Chevrolet, Owen's 1st Square



Register or Log In To remove these advertisements.

06-22-2021, 01:30 PM	#20
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,027	Re: New 64 Stepper Project What wheels did you decide to go with? __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

06-22-2021, 01:47 PM	#21
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project Chrome American five spoke. __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

06-25-2021, 02:13 PM	#22
The Rocknrod Moderator Join Date: Aug 2011 Location: China Spring, TX Posts: 7,280	Re: New 64 Stepper Project Just got off the phone with Fozzies Wheels, the Chrome American five spokes should be shipped starting (hopefully) Saturday. One box from LA and another from Ohio I think. __________________ Master Chief, US Navy, Retired 1964 C10 Step-side Short Bed - In Progress 2009 2500HD Duramax LTZ 1948 GMC Panel 1956 Big Window Stepside 1953 5 Window Chevy Stepside 1932 Coupe New Seat Foam for Bench Seats?

06-25-2021, 02:34 PM	#23
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,027	Re: New 64 Stepper Project Anticipation..... __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

06-26-2021, 12:16 PM	#24
88Stanger Registered User Join Date: Mar 2015 Location: Washington State Posts: 1,651	Re: New 64 Stepper Project and the excitement builds..... __________________ John 3:16 - Saved me... God Bless

Register or Log In To remove these advertisements.