What did you do to your truck today? - Page 19 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Vernski · 12-16-2009, 11:40 PM

Hey Tony received the steering wheel today it's in great condition to as some I've seen looking around, it will look nice on the truck. Thanks allot and again Happy Holidays I'm well pleased.---Vernski

amnima · 12-16-2009, 11:59 PM

I actually got out there and spent a few hours cleaning the front end up to paint. Starting to get in the mood to work on it again.

ol Curt · 12-17-2009, 05:35 PM

Quote:

Originally Posted by LILRED66

It is a factory tach...I have/have owned several and they all look the same on the front and back. They are used on the six and V8 trucks, but I think they have a different setting on them between the two engine configurations, but I don't remember for sure.

Tony,
Any idea what the clock is out of?

ruffrida2005 · 12-17-2009, 10:54 PM

I didn't do anything to the truck, but I did buy a new rebuild kit for my Demon carb! Anyone want a 750 Holley, never had gas in it!

sams60gmc · 12-18-2009, 02:09 AM

Worked on my front cross member for my back half today. Its a little over built but its for my wishbone link. I messed up and cut my tube wrong so now the seam faces the wrong way wich is one of my pet peaves, so I'll try and sand that down and make it look as un noticable as possible.

Woogeroo · 12-18-2009, 06:21 AM

wired new fancy plug to the alternator...

removed, tested and replaced with a new... engine module.

ran a test to confirm if alternator was charging... it was.

Pulled voltage regulator and bought a new one.

I hope to replace that, tomorrow. I also hope my headlights come back on...

-W

66GMC-Canuck · 12-19-2009, 08:57 PM

I installed LED taillights and a new flasher in my 66 GMC today. Nice and bright.

*LILRED66* · 12-19-2009, 08:58 PM

I checked out the shop, while my Dad was talking trucks with the fellas!

Byronic · 12-19-2009, 09:34 PM

I installed my fuel sending unit and made brackets to mount the tank to the frame. Only one old strap holding the tank. I'm sure glad it never broke.

198plus · 12-19-2009, 10:43 PM

Give him the keys Tony, Looks like he's ready for a spin around the block

Quote:

Originally Posted by LILRED66

I checked out the shop, while my Dad was talking trucks with the fellas!

Woogeroo · 12-19-2009, 11:32 PM

I installed the new voltage regulator and ran a ground wire from the ground post on the new alternator.

The biggest aggravation were getting the nuts onto the 3 bolts that hold the v. reg. to the radiator support.

yeesh!

it is running and charging again tho', so yay!

-W

sams60gmc · 12-20-2009, 12:00 AM

I moved my truck out of the garage yesterday to work on my buddies Honda, then moved it back in today. I took a pic because I thought it looked cool. I had to have him sit in the engine bay and put gas in the carb out of a bottle because my fuel pump went out.

TwoFiftyShifter · 12-20-2009, 12:07 AM

Cut the exhaust off of my truck right off the manifold, de-rusted and painted the headers, got that little 6 running a bit better. More to come tomorrow.

low79fx · 12-20-2009, 11:48 AM

Blasted and painted cateye capsules to install new lenses for my 65 GMC,fixed the horn button on steering wheel,cut out exhaust to pipe up to headers.And tested all lights,turn signals and brake lights.Almost ready for inspection.YEAH!

*LILRED66* · 12-20-2009, 12:32 PM

We made a little more progress on OLRED66.

*LILRED66* · 12-20-2009, 12:34 PM

And a few more of our progress...

Turkey · 12-20-2009, 02:52 PM

sanded and primered the tailgate...sorted and put away all of the tools that have acquired in the bed

SCOTI · 12-20-2009, 09:27 PM

Made templates & started fabbing my new rear upper shock mounts. I needed 17" overall length @ ride height & was shooting for 60° angle. I think my number crunching worked . . ....

shortbed70 · 12-20-2009, 10:04 PM

Got both front fenders sanded and maybe some paint this week.

Dinos63 · 12-20-2009, 10:30 PM

Quote:

Originally Posted by lilred66

i checked out the shop, while my dad was talking trucks with the fellas!

looks like the shops in good hands

Byronic · 12-20-2009, 10:46 PM

Took the panel out and gave her a top off of petro. I averaged 11.7 mpg on the only tank I have checked.
That includes her sitting at idle in the garage multi times and draining the line to replace the sending unit. It's good to see the gauge working.

sams60gmc · 12-20-2009, 10:49 PM

I sanded some of the rust off of my roof and then spread a little filler and got it sanded back down.

scotts62 · 12-20-2009, 11:58 PM

Put my trans on the work table, going to attempt my first rebuild

sams60gmc · 12-22-2009, 01:56 AM

not much today just worked on some 3/4-16 Weld in bungs for my 4 link.

jgh64pkup · 12-22-2009, 01:58 AM

i did nothing again

12-16-2009, 11:40 PM	#451
Vernski Registered User Join Date: May 2009 Location: Rathdrum, Idaho Posts: 1,135	Re: What did you do to your truck today? Hey Tony received the steering wheel today it's in great condition to as some I've seen looking around, it will look nice on the truck. Thanks allot and again Happy Holidays I'm well pleased.---Vernski

12-16-2009, 11:59 PM	#452
amnima Registered User Join Date: May 2009 Location: Hodgenville, ky Posts: 59	Re: What did you do to your truck today? I actually got out there and spent a few hours cleaning the front end up to paint. Starting to get in the mood to work on it again.

12-17-2009, 10:54 PM	#454
ruffrida2005 Member of the longbed union. Join Date: Feb 2009 Location: Killeen, Tx Posts: 2,158	Re: What did you do to your truck today? I didn't do anything to the truck, but I did buy a new rebuild kit for my Demon carb! Anyone want a 750 Holley, never had gas in it! __________________ Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759

12-18-2009, 02:09 AM	#455
sams60gmc Registered User Join Date: Sep 2008 Location: Vancouver Washington Posts: 726	Re: What did you do to your truck today? Worked on my front cross member for my back half today. Its a little over built but its for my wishbone link. I messed up and cut my tube wrong so now the seam faces the wrong way wich is one of my pet peaves, so I'll try and sand that down and make it look as un noticable as possible. Attached Images __________________ 1960 GMC short fleet, full frame build... http://67-72chevytrucks.com/vboard/s...d.php?t=329718

12-18-2009, 06:21 AM	#456
Woogeroo Registered User Join Date: Aug 2003 Location: tool box Posts: 3,115	Re: What did you do to your truck today? wired new fancy plug to the alternator... removed, tested and replaced with a new... engine module. ran a test to confirm if alternator was charging... it was. Pulled voltage regulator and bought a new one. I hope to replace that, tomorrow. I also hope my headlights come back on... -W

12-19-2009, 08:57 PM	#457
66GMC-Canuck Registered User Join Date: Sep 2009 Location: Edmonton, Alberta Canada Posts: 85	Re: What did you do to your truck today? I installed LED taillights and a new flasher in my 66 GMC today. Nice and bright. __________________ 66 GMC 1500 Series LWB

12-19-2009, 08:58 PM	#458
LILRED66 Account Suspended Join Date: May 2005 Location: Kansas City, KS Posts: 3,906	Re: What did you do to your truck today? I checked out the shop, while my Dad was talking trucks with the fellas! Attached Images

12-19-2009, 09:34 PM	#459
Byronic The Beach Cruiser Join Date: May 2009 Location: Panama City, Florida Posts: 358	Re: What did you do to your truck today? I installed my fuel sending unit and made brackets to mount the tank to the frame. Only one old strap holding the tank. I'm sure glad it never broke. Attached Images __________________ 1999 Silverado DD 1966 Panel Truck 2003 Harley Road Glide 1967 Schwinn Tandem Single Speed

12-19-2009, 11:32 PM	#461
Woogeroo Registered User Join Date: Aug 2003 Location: tool box Posts: 3,115	Re: What did you do to your truck today? I installed the new voltage regulator and ran a ground wire from the ground post on the new alternator. The biggest aggravation were getting the nuts onto the 3 bolts that hold the v. reg. to the radiator support. yeesh! it is running and charging again tho', so yay! -W

12-20-2009, 12:00 AM	#462
sams60gmc Registered User Join Date: Sep 2008 Location: Vancouver Washington Posts: 726	Re: What did you do to your truck today? I moved my truck out of the garage yesterday to work on my buddies Honda, then moved it back in today. I took a pic because I thought it looked cool. I had to have him sit in the engine bay and put gas in the carb out of a bottle because my fuel pump went out. Attached Images __________________ 1960 GMC short fleet, full frame build... http://67-72chevytrucks.com/vboard/s...d.php?t=329718

12-20-2009, 12:07 AM	#463
TwoFiftyShifter Registered User Join Date: Nov 2008 Location: Gwinnett GA Posts: 1,803	Re: What did you do to your truck today? Cut the exhaust off of my truck right off the manifold, de-rusted and painted the headers, got that little 6 running a bit better. More to come tomorrow. __________________ 1982 K10 SWB 1987 V20 - Sold - Doh!

12-20-2009, 11:48 AM	#464
low79fx Registered User Join Date: Jun 2008 Location: odessa,tx Posts: 208	Re: What did you do to your truck today? Blasted and painted cateye capsules to install new lenses for my 65 GMC,fixed the horn button on steering wheel,cut out exhaust to pipe up to headers.And tested all lights,turn signals and brake lights.Almost ready for inspection.YEAH!

12-20-2009, 12:32 PM	#465
LILRED66 Account Suspended Join Date: May 2005 Location: Kansas City, KS Posts: 3,906	Re: What did you do to your truck today? We made a little more progress on OLRED66. Attached Images

12-20-2009, 12:34 PM	#466
LILRED66 Account Suspended Join Date: May 2005 Location: Kansas City, KS Posts: 3,906	Re: What did you do to your truck today? And a few more of our progress... Attached Images

12-20-2009, 02:52 PM	#467
Turkey Registered User Join Date: Dec 2009 Location: Orlando, Florida Posts: 427	Re: What did you do to your truck today? sanded and primered the tailgate...sorted and put away all of the tools that have acquired in the bed



Register or Log In To remove these advertisements.

12-20-2009, 09:27 PM	#468
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 22,040	Re: What did you do to your truck today? Made templates & started fabbing my new rear upper shock mounts. I needed 17" overall length @ ride height & was shooting for 60° angle. I think my number crunching worked . . .... Attached Images __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

12-20-2009, 10:04 PM	#469
shortbed70 Registered User Join Date: Mar 2002 Location: Forney TX Posts: 4,512	Re: What did you do to your truck today? Got both front fenders sanded and maybe some paint this week. __________________ Troy 1965 Chevy Bagged,361 sbc,voodoo cam,1.5 full roller rockers,patriot 185cc vortec heads 2.02-1.60,vortec weiand polished intake,demon carb my truckhttp://67-72chevytrucks.com/vboard/s...d.php?t=332884 Big Red Dog build http://67-72chevytrucks.com/vboard/s...d.php?t=572274

12-20-2009, 10:46 PM	#471
Byronic The Beach Cruiser Join Date: May 2009 Location: Panama City, Florida Posts: 358	Re: What did you do to your truck today? Took the panel out and gave her a top off of petro. I averaged 11.7 mpg on the only tank I have checked. That includes her sitting at idle in the garage multi times and draining the line to replace the sending unit. It's good to see the gauge working. __________________ 1999 Silverado DD 1966 Panel Truck 2003 Harley Road Glide 1967 Schwinn Tandem Single Speed

12-20-2009, 10:49 PM	#472
sams60gmc Registered User Join Date: Sep 2008 Location: Vancouver Washington Posts: 726	Re: What did you do to your truck today? I sanded some of the rust off of my roof and then spread a little filler and got it sanded back down. __________________ 1960 GMC short fleet, full frame build... http://67-72chevytrucks.com/vboard/s...d.php?t=329718

12-20-2009, 11:58 PM	#473
scotts62 One day... Join Date: Apr 2008 Location: Tuttle, Ok Posts: 9,240	Re: What did you do to your truck today? Put my trans on the work table, going to attempt my first rebuild __________________ Scott 93 crew cab build Project 62

12-22-2009, 01:56 AM	#474
sams60gmc Registered User Join Date: Sep 2008 Location: Vancouver Washington Posts: 726	Re: What did you do to your truck today? not much today just worked on some 3/4-16 Weld in bungs for my 4 link. __________________ 1960 GMC short fleet, full frame build... http://67-72chevytrucks.com/vboard/s...d.php?t=329718

12-22-2009, 01:58 AM	#475
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: What did you do to your truck today? i did nothing again __________________ Gage 1967 C10 Shortbed Stepside

Register or Log In To remove these advertisements.