Project Penicillin~ 68 crewcab build up! - Page 19 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Chevyman63 · 11-20-2008, 09:54 PM

That thing is looking sweet!

Now that's a truck!

extd56 · 11-20-2008, 09:56 PM

Quote:

Originally Posted by fun in dirt

That is super nice! You have alot of endurance to stick with this build. I can't even image the hours in this trucks. I'm tired after just reading the thread.
I've always been against having a 4wd & not putting it in the mud. But you better not this one,it's way to nice to do that!

I almost traded it for a very nice Blazer, my wife would have been happy if I did that.

**88JRFAN** · 11-23-2008, 01:18 AM

Quote:

Originally Posted by extd56

I almost traded it for a very nice Blazer, my wife would have been happy if I did that.

Not that would be a crime. I would much rather have the truck over the blazer. Especially after all the work you have put in it. The blue looks nice, will be great to see it in full paint.

**Dieselwrencher** · 12-03-2008, 05:53 PM

I'm so glad you didn't trade it for a blazer! This truck is awesome!

extd56 · 12-03-2008, 06:10 PM

I hope to make this a runner pretty soon, it is getting tuff pushing this on and off the trailer.

**Dieselwrencher** · 12-03-2008, 07:47 PM

I bet it is. But atleast it looks cool sitting there!

OLDIRON69 · 12-04-2008, 11:34 AM

Love the 4 doors and RC is a metal master!

grinch4om · 12-26-2008, 05:14 PM

sweet!!

mycool72 · 12-26-2008, 11:41 PM

Great build!

Mayo · 01-05-2009, 02:38 PM

cool truck

extd56 · 02-04-2009, 08:32 PM

I put the hood on to see how it looked and to hopefully get some more ambition before the rain. I did get the old support in front of the mounts and the motor mounts out for some new stuff. This should make it a little bit stiffer.

extd56 · 02-04-2009, 08:49 PM

Here are some pictures of the way it used to look

Chevyman63 · 02-04-2009, 09:41 PM

That is going to be one awesome truck! I'm looking forward to seeing it complete.

extd56 · 02-04-2009, 11:17 PM

Me too

extd56 · 02-24-2009, 02:51 PM

Here are some pictures of the motor installed in the truck. Now I have to figure out how the braces and mounting go for the serpentine belt system. I did not remove it so this should be fun.

LOW DOUGH · 02-24-2009, 03:51 PM

Looking Good!

**Dieselwrencher** · 02-24-2009, 04:33 PM

Very nice! Are those valve covers stock GM aluminum ones polished? I had a set I did that to and they looked awesome!

Rokcrln · 02-24-2009, 09:37 PM

Step by Step! Are your brackets and pullys powder coated or after market? They look good.

Kevin
LFD Inc.

extd56 · 02-25-2009, 01:22 AM

The valve covers and the brackets are all powder coated in near chrome.

extd56 · 03-08-2009, 01:10 AM

A few more pics of the motor, ready for the muffler shop.

LOW DOUGH · 04-06-2009, 11:25 AM

cool

blazer72 · 04-06-2009, 09:52 PM

I want it/one

extd56 · 04-22-2009, 04:41 PM

Well I got the windows in the rear doors all cut and installed for nwo but will e taking them back out before paint is finished. I also just received the hot rod air unit and Howell wiring for the 454/4L80 so the wiring fun is set to begin.

**Hart_Rod** · 04-22-2009, 06:01 PM

Quote:

Originally Posted by extd56

Well I got the windows in the rear doors all cut and installed for nwo but will e taking them back out before paint is finished. I also just received the hot rod air unit and Howell wiring for the 454/4L80 so the wiring fun is set to begin.

Looks good. Did you angle the quarter windows for reason?

R/

extd56 · 04-22-2009, 08:12 PM

They were at a angle in the burb door and just turned out that way once the doors were modified for the crew cab. The track is used for the door glass and for the fixed glass.

11-20-2008, 09:54 PM	#451
Chevyman63 Can't wait to retire!! Join Date: Feb 2003 Location: Corunna, MI Posts: 1,575	Re: Project Penicillin~ 68 crewcab build up! That thing is looking sweet! Now that's a truck! __________________ 2009 4x4 Chevy Crew Cab 6.0 1989 4x4 Siverado (270,000 miles) 1972 4x4 Blazer 2007 Chevy Cutaway 1 ton 1970 Corvette (sons project) RIP - CLR 10/11/09

12-03-2008, 05:53 PM	#454
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,139	Re: Project Penicillin~ 68 crewcab build up! I'm so glad you didn't trade it for a blazer! This truck is awesome!

12-03-2008, 06:10 PM	#455
extd56 Senior Member Join Date: Nov 2004 Location: Vacaville, CA Posts: 2,272	Re: Project Penicillin~ 68 crewcab build up! I hope to make this a runner pretty soon, it is getting tuff pushing this on and off the trailer.

12-03-2008, 07:47 PM	#456
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,139	Re: Project Penicillin~ 68 crewcab build up! I bet it is. But atleast it looks cool sitting there!

12-04-2008, 11:34 AM	#457
OLDIRON69 Registered User Join Date: Mar 2007 Location: Ben Wheeler,Texas Posts: 992	Re: Project Penicillin~ 68 crewcab build up! Love the 4 doors and RC is a metal master! __________________ 05 2500HD 6.0 excab 69 LWB-Gone but not forgotten! 68 Dodge Charger 383/727 69 Dodge Charger-440/4spd

12-26-2008, 05:14 PM	#458
grinch4om dang its hot Join Date: Nov 2006 Location: frankfort kentucky Posts: 1,349	Re: Project Penicillin~ 68 crewcab build up! sweet!!

12-26-2008, 11:41 PM	#459
mycool72 Registered User Join Date: Aug 2008 Location: Mansfield, TX Posts: 309	Re: Project Penicillin~ 68 crewcab build up! Great build!

01-05-2009, 02:38 PM	#460
Mayo Cool Truck Join Date: Dec 2008 Location: Bowie,MD Posts: 1,869	Re: Project Penicillin~ 68 crewcab build up! cool truck __________________ 1968 Chevrolet C20 Longhorn "Cool Truck" 1937 Chevrolet Pickup - Project Looking for a patina'd 68 50th Anniversary longbed

02-04-2009, 08:32 PM	#461
extd56 Senior Member Join Date: Nov 2004 Location: Vacaville, CA Posts: 2,272	Re: Project Penicillin~ 68 crewcab build up! I put the hood on to see how it looked and to hopefully get some more ambition before the rain. I did get the old support in front of the mounts and the motor mounts out for some new stuff. This should make it a little bit stiffer. Attached Images Last edited by extd56; 02-04-2009 at 08:34 PM.

02-04-2009, 08:49 PM	#462
extd56 Senior Member Join Date: Nov 2004 Location: Vacaville, CA Posts: 2,272	Re: Project Penicillin~ 68 crewcab build up! Here are some pictures of the way it used to look Attached Images Last edited by extd56; 02-04-2009 at 08:49 PM.

02-04-2009, 09:41 PM	#463
Chevyman63 Can't wait to retire!! Join Date: Feb 2003 Location: Corunna, MI Posts: 1,575	Re: Project Penicillin~ 68 crewcab build up! That is going to be one awesome truck! I'm looking forward to seeing it complete. __________________ 2009 4x4 Chevy Crew Cab 6.0 1989 4x4 Siverado (270,000 miles) 1972 4x4 Blazer 2007 Chevy Cutaway 1 ton 1970 Corvette (sons project) RIP - CLR 10/11/09

02-04-2009, 11:17 PM	#464
extd56 Senior Member Join Date: Nov 2004 Location: Vacaville, CA Posts: 2,272	Re: Project Penicillin~ 68 crewcab build up! Me too

02-24-2009, 02:51 PM	#465
extd56 Senior Member Join Date: Nov 2004 Location: Vacaville, CA Posts: 2,272	Re: Project Penicillin~ 68 crewcab build up! Here are some pictures of the motor installed in the truck. Now I have to figure out how the braces and mounting go for the serpentine belt system. I did not remove it so this should be fun. Attached Images

02-24-2009, 03:51 PM	#466
LOW DOUGH I'M TRUCK CRAZY! Join Date: Oct 2006 Location: Sachse, TEXAS Posts: 1,737	Re: Project Penicillin~ 68 crewcab build up! Looking Good!

02-24-2009, 04:33 PM	#467
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,139	Re: Project Penicillin~ 68 crewcab build up! Very nice! Are those valve covers stock GM aluminum ones polished? I had a set I did that to and they looked awesome! __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*



Register or Log In To remove these advertisements.

02-24-2009, 09:37 PM	#468
Rokcrln Senior Member Join Date: Jul 2005 Location: Winters Ca. 95694 Posts: 4,843	Re: Project Penicillin~ 68 crewcab build up! Step by Step! Are your brackets and pullys powder coated or after market? They look good. Kevin LFD Inc.

02-25-2009, 01:22 AM	#469
extd56 Senior Member Join Date: Nov 2004 Location: Vacaville, CA Posts: 2,272	Re: Project Penicillin~ 68 crewcab build up! The valve covers and the brackets are all powder coated in near chrome.

03-08-2009, 01:10 AM	#470
extd56 Senior Member Join Date: Nov 2004 Location: Vacaville, CA Posts: 2,272	Re: Project Penicillin~ 68 crewcab build up! A few more pics of the motor, ready for the muffler shop. Attached Images

04-06-2009, 11:25 AM	#471
LOW DOUGH I'M TRUCK CRAZY! Join Date: Oct 2006 Location: Sachse, TEXAS Posts: 1,737	Re: Project Penicillin~ 68 crewcab build up! cool

04-06-2009, 09:52 PM	#472
blazer72 Freedom isn't Free Join Date: Oct 2006 Location: OKC Posts: 393	Re: Project Penicillin~ 68 crewcab build up! I want it/one

04-22-2009, 04:41 PM	#473
extd56 Senior Member Join Date: Nov 2004 Location: Vacaville, CA Posts: 2,272	Re: Project Penicillin~ 68 crewcab build up! Well I got the windows in the rear doors all cut and installed for nwo but will e taking them back out before paint is finished. I also just received the hot rod air unit and Howell wiring for the 454/4L80 so the wiring fun is set to begin. Attached Images

04-22-2009, 08:12 PM	#475
extd56 Senior Member Join Date: Nov 2004 Location: Vacaville, CA Posts: 2,272	Re: Project Penicillin~ 68 crewcab build up! They were at a angle in the burb door and just turned out that way once the doors were modified for the crew cab. The track is used for the door glass and for the fixed glass.

Register or Log In To remove these advertisements.