KS Labor Day 67-72 parts special!!!!!!!! - Page 19 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1tuff71 · 01-30-2012, 01:06 PM

Heres a pic of the part

1tuff71 · 01-30-2012, 01:12 PM

Oh well I tried

1tuff71 · 01-30-2012, 04:21 PM

Randy you wouldn't happen to have a pic of that hatch mech. ? Mines broken at the square shaft and was jury rigged back together so I'm not sure what I have or don't. He had this 1/2 spacer onthe outside between the hatch and the handle and I have nothing to compare it to. Thanks. Don't know how you do it but you got it going on man !!

1tuff71 · 01-30-2012, 10:32 PM

looks great. How much for the latch

teeitup · 01-30-2012, 10:35 PM

$15 and I'll put it in with the tank piece

1tuff71 · 01-30-2012, 10:53 PM

Ok works for me. Send me payment info. $50 for the both, correct ?

18436572 · 01-31-2012, 09:36 AM

how much for a radio sent to 92115?

teeitup · 01-31-2012, 09:37 AM

1tuff71, info sent

Dukkie, sounds good

18436572, sorry sold all my radios I had

Thanks Randy

1tuff71 · 01-31-2012, 09:59 AM

Thanks a ton Randy. As soon as the wife gets home with the P/P info I'll get that off. I may think of something else. You haven't come across any axle truss's on the 4x4's you pick up ?

1tuff71 · 01-31-2012, 01:55 PM

Randy, I did some research on the handle for the latch and found out it has a square shaft about 6-7" long coming out of it. Mine has a stub of about 3/4" on it so it looks as though I'm going to need your handle too if the shaft is still intact. Is that the case with yours? Thanks again.

1tuff71 · 01-31-2012, 09:55 PM

Payment sent P/P Randy. Thanks for your help.

teeitup · 01-31-2012, 10:33 PM

Got your money, were you needing the handle? Thanks Randy

1tuff71 · 02-01-2012, 09:50 AM

I guess so. All I need is the square shaft on the handle. How much for the handle? I may be able to find some square stoke at Lowes that would work but haven't checked yet.

teeitup · 02-01-2012, 09:57 AM

I'll see what I have out there as far as old handles

teeitup · 02-02-2012, 08:57 PM

1tuff71, glad to help, Thanks

Pics for Tony

shawno72 · 02-01-2012, 10:00 AM

Hey do you have any throttle cables? Even just the piece that goes in the dash? Doesn't have to be complete just looking to fill the hole where the throttle cable goes. I guess I should clarify that it's the throttle cable that goes below the choke on the dash.
Posted via Mobile Device

1tuff71 · 02-01-2012, 10:26 AM

You don't have the small clips that hold the rods to that latch mechanism do you? Nightmare stuff !

1tuff71 · 02-01-2012, 11:19 AM

Quote:

Originally Posted by 1tuff71

You don't have the small clips that hold the rods to that latch mechanism do you? Nightmare stuff !

Never mind found'em

teeitup · 02-01-2012, 01:59 PM

Shawno72, I have a couple out there, I'll get pics

1tuff71, I will look for handle

treeboy97, I think I have one good one out, I will look

Thanks Randy

Redleg · 02-01-2012, 03:57 PM

Randy
Looking for a heater control panel without Air Conditioner with all 3 levers. Really needing just all 3 levers (Defrost, Air, and Temp levers) but would take a whole unit if you have one in good shape!

teeitup · 02-01-2012, 05:56 PM

Joel, sorry none right now, Thanks Randy

treeboy97 · 02-01-2012, 10:42 AM

Looking for a fan shroud for a 70 with a V8, thanks

Shipping to 45504

shawno72 · 02-01-2012, 10:38 PM

Hey Randy along with the throttle cable would you happen to have a deluxe choke knob? Thank you.
Posted via Mobile Device

patterson1 · 02-01-2012, 11:03 PM

HI This is all new to me. I hope this is right . I need a lot of stuff how about 2 door for a 1969 C10 for
Thank you

teeitup · 02-02-2012, 12:13 AM

Redleg, I haven't seen any painted ones for a long time, sorry

Shawno72, no choke cables, I'll try to get pic of throttle tommorow

Patterson1, I have alot of stuff let me know what your needing

Thanks Randy

01-30-2012, 01:06 PM	#1
1tuff71 Registered User Join Date: Dec 2008 Location: Clarkston, Michigan Posts: 462	Re: Labor Day 67-72 parts special!!!!!!!! Heres a pic of the part

01-30-2012, 01:12 PM	#2
1tuff71 Registered User Join Date: Dec 2008 Location: Clarkston, Michigan Posts: 462	Re: Labor Day 67-72 parts special!!!!!!!! Oh well I tried

01-30-2012, 04:21 PM	#3
1tuff71 Registered User Join Date: Dec 2008 Location: Clarkston, Michigan Posts: 462	Re: Labor Day 67-72 parts special!!!!!!!! Randy you wouldn't happen to have a pic of that hatch mech. ? Mines broken at the square shaft and was jury rigged back together so I'm not sure what I have or don't. He had this 1/2 spacer onthe outside between the hatch and the handle and I have nothing to compare it to. Thanks. Don't know how you do it but you got it going on man !!

01-30-2012, 10:32 PM	#4
1tuff71 Registered User Join Date: Dec 2008 Location: Clarkston, Michigan Posts: 462	Re: Labor Day 67-72 parts special!!!!!!!! looks great. How much for the latch

01-30-2012, 10:35 PM	#5
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Labor Day 67-72 parts special!!!!!!!! $15 and I'll put it in with the tank piece __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-30-2012, 10:53 PM	#6
1tuff71 Registered User Join Date: Dec 2008 Location: Clarkston, Michigan Posts: 462	Re: Labor Day 67-72 parts special!!!!!!!! Ok works for me. Send me payment info. $50 for the both, correct ?

01-31-2012, 09:36 AM	#7
18436572 Registered User Join Date: May 2010 Location: San Diego CA. Posts: 32	Re: Labor Day 67-72 parts special!!!!!!!! how much for a radio sent to 92115? __________________

01-31-2012, 09:37 AM	#8
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Labor Day 67-72 parts special!!!!!!!! 1tuff71, info sent Dukkie, sounds good 18436572, sorry sold all my radios I had Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

01-31-2012, 09:59 AM	#9
1tuff71 Registered User Join Date: Dec 2008 Location: Clarkston, Michigan Posts: 462	Re: Labor Day 67-72 parts special!!!!!!!! Thanks a ton Randy. As soon as the wife gets home with the P/P info I'll get that off. I may think of something else. You haven't come across any axle truss's on the 4x4's you pick up ?

01-31-2012, 01:55 PM	#10
1tuff71 Registered User Join Date: Dec 2008 Location: Clarkston, Michigan Posts: 462	Re: Labor Day 67-72 parts special!!!!!!!! Randy, I did some research on the handle for the latch and found out it has a square shaft about 6-7" long coming out of it. Mine has a stub of about 3/4" on it so it looks as though I'm going to need your handle too if the shaft is still intact. Is that the case with yours? Thanks again.

01-31-2012, 09:55 PM	#11
1tuff71 Registered User Join Date: Dec 2008 Location: Clarkston, Michigan Posts: 462	Re: Labor Day 67-72 parts special!!!!!!!! Payment sent P/P Randy. Thanks for your help.

01-31-2012, 10:33 PM	#12
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Labor Day 67-72 parts special!!!!!!!! Got your money, were you needing the handle? Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-01-2012, 09:50 AM	#13
1tuff71 Registered User Join Date: Dec 2008 Location: Clarkston, Michigan Posts: 462	Re: Labor Day 67-72 parts special!!!!!!!! I guess so. All I need is the square shaft on the handle. How much for the handle? I may be able to find some square stoke at Lowes that would work but haven't checked yet.

02-01-2012, 09:57 AM	#14
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Labor Day 67-72 parts special!!!!!!!! I'll see what I have out there as far as old handles __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-02-2012, 08:57 PM	#15
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Labor Day 67-72 parts special!!!!!!!! 1tuff71, glad to help, Thanks Pics for Tony Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"



Register or Log In To remove these advertisements.

02-01-2012, 10:00 AM	#16
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: Labor Day 67-72 parts special!!!!!!!! Hey do you have any throttle cables? Even just the piece that goes in the dash? Doesn't have to be complete just looking to fill the hole where the throttle cable goes. I guess I should clarify that it's the throttle cable that goes below the choke on the dash. Posted via Mobile Device __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!" Last edited by shawno72; 02-01-2012 at 12:06 PM.

02-01-2012, 10:26 AM	#17
1tuff71 Registered User Join Date: Dec 2008 Location: Clarkston, Michigan Posts: 462	Re: Labor Day 67-72 parts special!!!!!!!! You don't have the small clips that hold the rods to that latch mechanism do you? Nightmare stuff !

02-01-2012, 01:59 PM	#19
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Labor Day 67-72 parts special!!!!!!!! Shawno72, I have a couple out there, I'll get pics 1tuff71, I will look for handle treeboy97, I think I have one good one out, I will look Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-01-2012, 05:56 PM	#21
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Labor Day 67-72 parts special!!!!!!!! Joel, sorry none right now, Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

02-01-2012, 10:42 AM	#22
treeboy97 Registered User Join Date: May 2009 Location: Waynesville, Ohio Posts: 136	Re: Labor Day 67-72 parts special!!!!!!!! Looking for a fan shroud for a 70 with a V8, thanks Shipping to 45504 __________________ 1970 C10 LWB (Grandfather's Truck) 5.3 4L60E 2012 Victory Cross Country Touring I'm not wasting money on my truck/bike, I'm helping to rescue the economy one mod at a time.

02-01-2012, 10:38 PM	#23
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: Labor Day 67-72 parts special!!!!!!!! Hey Randy along with the throttle cable would you happen to have a deluxe choke knob? Thank you. Posted via Mobile Device __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

02-01-2012, 11:03 PM	#24
patterson1 Registered User Join Date: Feb 2012 Location: Colonial Heights Va. Posts: 3	Re: Labor Day 67-72 parts special!!!!!!!! HI This is all new to me. I hope this is right . I need a lot of stuff how about 2 door for a 1969 C10 for Thank you

02-02-2012, 12:13 AM	#25
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Labor Day 67-72 parts special!!!!!!!! Redleg, I haven't seen any painted ones for a long time, sorry Shawno72, no choke cables, I'll try to get pic of throttle tommorow Patterson1, I have alot of stuff let me know what your needing Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

Register or Log In To remove these advertisements.